DC CCTV Splitter 4 way 4-way 2.1mm power
  • DC CCTV Splitter 4 way 4-way 2.1mm power
  • DC CCTV Splitter 4 way 4-way 2.1mm power
  • DC CCTV Splitter 4 way 4-way 2.1mm power
DC CCTV Splitter 4 way 4-way 2.1mm power
Move your mouse over image or click to enlarge
  • DC CCTV Splitter 4 way 4-way 2.1mm power
  • DC CCTV Splitter 4 way 4-way 2.1mm power
  • DC CCTV Splitter 4 way 4-way 2.1mm power

CCTV Power Splitter SR-DCSP-1F4M DC 4 Way General

A$8.50
Tax included
SR-DCSP-1F4M
  • Simply and look Professional for wiring
  • Easiest for CCTV Camera Installation Saves Time and Money
  • Easy to use
  • Materials (External): PVC Plastic
  • Total Length: About 22 ~ 25 cm
  • USED ​​For any 2.1mm male DC power adapter
  • Plug Diameter: 5.5mm outer, inner 2.1mm
  • Connector Type: 5.5 * 2.1mm 1 * Female To 4 * Male Cable
Qty

CCTV Power Splitter DC 4 Way General

 

SR-DCSP-1F4M

 

Power Splitter DC 4Way - 1xFemale 2.1mm Socket to 4xMale 2.1mm Plugs - Perfect for CCTV and General Purpose DC Requirements. This is a very simple splitter cable perfect for using multiple cameras on 1 power supply.  One female 2.1mm DC socket then 25cm cable and 4 x Male 2.1mm Plugs. It is very important to ensure the total load of the cameras does NOT exceed the output current of your power supply.

 

Run multiple devices from a single power supply or extend the low voltage cable between a plug pack and a device. Ideal for surveillance applications and available in a range of versions to suit many applications. All cables pre-made with molded DC plugs and sockets.

Simple calculations: 

 

If you have 8 cameras using 300mA each = 2.4Amps - you need a minimum 2.5Amp power supply, preferably 3Amps.

Cam1+Cam2+......+Cam8 = Total Current Required.

Related Products

12 other products in the same category: