Industrial Dual-SFP Gigabit PoE+ Switch
Model IF-102PU12/48-2SFP • 2 × SFP Fibre | 2 × 30 W PoE+ | 12-48 V DC with Boost
The IF-102PU12/48-2SFP is a compact industrial dual-SFP PoE+ switch built for Australia’s harshest edge-network environments. Two 100/1000 Base-X SFP slots push gigabit data up to 20 km over single- or multi-mode fibre, while two IEEE 802.3at PoE+ ports deliver a full 30 W each for PTZ cameras, Wi-Fi 6/6E access points, ALPR units and more—all from a fan-less IP30 aluminium chassis that thrives in -40 °C to +75 °C.
.jpg)
.jpg)
%20(1).jpg)
Why Dual SFP + Dual PoE + Matters
- Future-proof fibre backbone: hot-swap SFP transceivers to suit single-mode, multi-mode or BiDi links up to 20 km—immune to lightning and EMI.
- Power where you need it: two RJ45 ports supply 30 W each, eliminating standalone injectors and AC outlets at the pole, mast or roadside cabinet.
- 12–48 V DC input with boost: run off vehicle, solar or UPS batteries; the integrated converter delivers a regulated 48 V PoE rail.
- One box, half the clutter: replace two media converters + two PoE injectors with a single DIN-rail switch—less cabling, less heat, fewer call-outs.
Real-World Applications
- Campus-wide 4K CCTV: fibre backhaul to the security control room; PoE+ powers PTZ cameras on every light pole—zero external injectors.
- Solar-powered remote gates: 24 V battery in, 48 V PoE out for an outdoor bullet camera and LoRaWAN gateway.
- Smart-city bus shelters: single-mode fibre daisy-chains shelters in a ring; PoE+ feeds a Wi-Fi 6 AP and vandal-deterrence camera.
- Factory-floor machine vision: SFP modules carry uncompressed video through EMI; PoE+ powers high-speed inspection cameras.
- Transport ITS roadside cabinets: fibre uplinks span kilometres; PoE+ drives radar speed cameras, ALPR and weather sensors from a –40 °C to +75 °C switch.
Key Benefits at a Glance
- Extend fibre networks with dual SFP slots (100/1000 Base-X).
- 60 W PoE budget (30 W × 2) for PTZs, Wi-Fi 6, digital signage, VoIP, kiosks.
- Wide DC range: accepts 12 V, 24 V or 48 V, outputs regulated 48 V PoE.
- Fan-less IP30 aluminium shell—silent, dust-proof, vibration-resistant.
- Plug-and-play: auto-MDI/MDI-X, jumbo-frame support, link-fault pass-through.
Technical Specifications
| Copper Ports | 2 × 10/100/1000 Mbps PoE+ (30 W each) |
|---|
| Fibre Ports | 2 × 100/1000 Base-X SFP, LC/SC via module |
|---|
| PoE Budget | 60 W total (IEEE 802.3at) |
|---|
| DC Input | 12 – 48 V via 4-pin terminal (reverse-polarity protected) |
|---|
| Operating Temp | -40 °C to +75 °C (-40 °F to +167 °F) |
|---|
| Enclosure / Cooling | IP30 aluminium, fan-less convection |
|---|
| Size / Weight | 135 × 105 × 38 mm • ≈ 650 g |
|---|
| Compliance | CE, FCC, RoHS, EN 55032 Class A |
|---|
| Warranty | 3-year limited hardware |
|---|
Frequently Asked Questions
Can I create a fibre ring?
Yes—use one SFP for upstream and the other for downstream; the switch supports RSTP for sub-second fail-over.
Do the SFP slots work at 100 Mbps?
Absolutely. They are dual-rate 100/1000 Base-X for legacy fibre runs.
What if my site only has 24 V batteries?
The integrated booster steps 12–48 V up to 48 V PoE—no external converter required.
What’s in the Box?
- 1 × IF-102PU12/48-2SFP switch (DIN-rail clip pre-fitted)
- Wall-mount brackets & screws
- 4-pin DC terminal-block plug
- Quick-start guide
Ready to streamline your edge networking?
Cut cabling, cut downtime and power devices kilometres away with the IF-102PU12/48-2SFP—your rugged dual-SFP PoE switch in stock now.
