Swann NVR 16‑8580 • Genuine 48 V 3.75 A Power Adapter
4‑Pin DIN | 180 W | AU Mains Lead Included
The 48 V DC, 3.75 A desktop adapter below is the exact, factory‑specified replacement for Swann’s PoE Network Video Recorder line NVR 16‑8580 / NVR 16‑8580 RN / NVR‑168580. Swapping a tired or failed supply restores full PoE budget on every channel, stabilises 4 K recording and prevents random camera drop‑outs.
Why Choose This OEM Adapter?
- Correct Output – 48 V DC @ 3.75 A (180 W) to match Swann PoE design.
- 4‑Pin DIN Connector – plugs straight in; no DIY rewiring or adapters.
- Wide‑range Input – 110–240 V AC 50/60 Hz auto‑sensing for global use.
- Comprehensive Protection – short‑circuit, over‑current, over‑voltage & thermal shutdown.
- RCM‑approved AU IEC Lead – 1.2 m cable included for fast, compliant install.
- Quiet & Efficient – convection‑cooled design, < 0.3 W standby power.
Compatible Swann Recorders
- Swann NVR 16‑8580 – all HDD variants
- Swann NVR 16‑8580 RN
- Swann NVR‑168580
- Any Swann recorder labelled 48 V 3.75 A 4‑Pin
Cross‑Reference Part Numbers - these are all compatible
| Swann / Fujia Label | FJ‑SW2028A48003750 |
|---|
| Updated Swann SKU | FJ‑SW2028A48003850 |
|---|
| Generic OEM Code | CS‑4803750 / ADS‑210NX‑48‑1 |
|---|
Package Contents
- 1 × 48 V 3.75 A desktop power adapter with 4‑pin DIN DC lead
- 1 × RCM‑approved 1.2 m IEC‑C13 AU mains cable
Installation Tips
Power off the recorder, unplug the original supply, then connect the replacement adapter. Ensure the 4‑pin DIN aligns with the NVR’s keyed socket—never force the plug. After reconnecting mains power the NVR should boot within 60 seconds and all PoE cameras will reconnect.
Appearance may vary slightly as Swann updates suppliers, but electrical specifications and safety approvals remain identical to the original part.
