Jaycar / CONCORD 48V 1.5A 4-Pin NVR Power Supply
Part code: JC-PSU-NVR48-1.5 • Same spec as the Swann 8-channel PSU
Purpose-built 48V 1.5A adaptor with a round 4-pin connector for CONCORD (Jaycar / Electus) NVRs that specify a 48V 4-pin input. It matches the voltage, current and pinout used by popular 8-channel recorders, making it a straight, like-for-like swap. This is the same supply specification as the Swann recorder’s original adaptor.
Quick check: Your old label should read 48V, 1.5A and show a round 4-pin plug.
Why choose this adaptor
Compatible recorder models (check your sticker)
Labels vary by region/packaging — for certainty, match by plug (round 4-pin) and rating (48V 1.5A).
Cross-reference / OEM markings
- Jaycar / CONCORD: SR-PSU-NVR48-1.5 → JC-PSU-NVR48-1.5
- Common OEM numbers: FJ-SW20254801500, CS-4801500
Typical signs it’s due for replacement
- No power: no LEDs, no fan/HDD activity
- Hangs at splash screen under load
- Intermittent HDD detection / random resets
Swap-over in minutes
- Shut down the recorder and unplug from mains
- Disconnect the 4-pin plug and the IEC lead
- Connect the new 48V 1.5A 4-pin adaptor and included IEC cable
- Power up and confirm normal boot and HDD detection
Also searched as: Jaycar CONCORD NVR power supply 48V 1.5A, 4-pin 48V NVR PSU, JC-PSU-NVR48-1.5 adaptor, FJ-SW20254801500, CS-4801500.
Need it fast? Choose Express Post at checkout.
We prioritise urgent orders with tracked Express Shipping and same-day despatch cut-off on business days.
- Secure checkout via PayPal or major cards (SSL encrypted)
- Careful packing to protect your gear in transit
- Local support from the InFront Technologies team
InFront Technologies — trusted for CCTV & accessories.
Unsure it fits? Send a photo of your recorder’s underside label and the old adaptor sticker — we’ll confirm before you buy.
