Permaconn PM45-4G 4G PM45 Alarm Communicator
- Remote “over-the-air” alarm panel
- Dual SIM + IP alarm communicator
- Plug & Play solution
- Interfaces with any Contact
- ID alarm pane
- 3 input + 3 output, function control
- Communicator automatically switches between 4G and 3G networks
- Low current draw, easily powered from alarm pane
Permaconn 4G PM45 Alarm Communicator
PM45-4G
The PM45-4G is a versatile alarm communicator that reports on 4G, GPRS and IP to the Central Station. This unit can interface with a range of alarm panels using Contact ID. Primary alarm path is IP, followed by 4G/GPRS in the event of a wired ethernet failure. If no IP connection exists the communicators will report on GPRS or 4G only.
Product Features:
• Small size - Fits inside alarm panel enclosure and suitable for ATM & M2M applications
• Secure VPN within Optus & Telstra networks - Dedicated for Permaconn events only
• AES128 encryption for alarm data - Secure transmissions over the public internet
• High speed RS232 Interface - Future development
• Various diagnostic LEDs - Easy installation
• Activate, commission and diagnose using Atlas - Seamless installation process
• Three (3) dedicated paths of communication - Uptime in excess of 99.9%
• Internal watchdog reset function - No unnecessary service call-outs
• Monitors & reports dialler interface lead status - Panel dialler to Permaconn interface secure
• AS/NZ2201.5:2008 compliance
- Dimensions
- 110mm (h) x 25mm (d) x 80mm (w)
- Operating Environment
- 0°- 50°C @15% to 85% humidity (non-condensing)
- Weight
- 120g
- Power
- 8–15V DC. Terminal (must power from appoved supply)
- Housing Material
- ABS plastic - Green
- Power Consumption
- Standby: 0.08A @13.8V DC / Transmitting: 0.19A @13.8V DC
- Antenna
- Triple band 3G & Triple band 4G
- Approvals
- EN 55022:2006/A1:2007, AS/CA S042.1-2011, AS/CA S042.4-2011 AS/NZS 60950.1-2011, AES2201.5:2008, EN 62311:2008, EN 301489-1 EN 301 489-24, EN 301 908-1, EN60950-1
- Auxiliary Input
- 3 x 24Hr input - state change detected every second. / EOL 3.3K
- Auxiliary Output
- 3 x Open Collector output @ 50mA (max) / Function control using Atlas web portal and/or 'Pocket Secure’
- Communication Protocol
- Ethernet (10/100BASE-T)
- Data Security
- AES Encryption
- Modem
- Quectel EC21
- Network Protocol
- DHCP or Static IP
- Serial Port
- High Speed RS232 interface
- Static IP Network Configuration
- Ethernet interface using ‘IpSetup’ program / Atlas web portal using mobile connection
- Supported Modulation
- BELL-103, ITU-V21/V22/V22B