Category
Standalone Access Control
Standalone access control readers and exit buttons
The simplest way to control one door: a reader outside, an exit button inside and an electric lock.
The Watchguard ACRDR100 IP55 reader stores up to 500 users and 5 super-users on keyfobs or cards, drives the lock relay itself and has a door chime and tamper output. Pair it with a push, slim, touch or touchless exit button inside and a strike or maglock from our door hardware range.
For exits that must open in an emergency, add a resettable green call point to cut power to fail-safe locks.
- 500 users — keyfobs or cards on one reader
- Expandable — add up to 3 more readers
- Exit buttons — push, slim, touch and touchless
- Emergency release — green call points for exit doors
- No network needed
- 500 users
- Exit buttons
- Fail-safe ready
Shop access control
Featured: Watchguard ACRDR100 standalone reader
IP55 standalone reader in matte grey with a black gloss front. It stores 500 users and 5 super-users, holds the lock open for 1 to 60 seconds and supports up to 3 extra readers on its data bus.
- Works with fail-safe or fail-secure locks
- Built-in door chime and tamper relay
- 12 VDC, 60–80 mA
Standalone Access Control FAQ
What do I need for a single door?
A reader (ACRDR100), an electric strike or magnetic lock, an exit button for the inside, a 12 V power supply and keyfobs (ACKEY102, pack of 10).
Can I add more readers later?
Yes. The ACRDR100 data bus takes up to three additional readers.
Simple, reliable door control. A standalone reader and the right lock secure a door without a computer, network or subscription.