Category
Swann Spare Parts
Swann replacement parts
Get your Swann system recording again
Most Swann faults come down to a power adapter or a hard drive, not the whole kit. Pick what’s wrong below and go straight to the part that fits.
- Matched to Swann’s original ratings
- Tracked delivery Australia-wide
- Not sure? We’ll check your label
What’s wrong?
-
Find your recorder's power supplyRecorder won't turn on
Almost always the power adapter. Match the volts, amps and plug on your old adapter's label.
-
Camera has no picture
On Swann DVR kits a failed 12V camera adapter or splitter is the usual cause.
- 12V 2A + 4-way splitter Most popular $ 28.50
- 12V 2A camera adapter Most popular $ 22.50
- 12V 1A camera adapter $ 15.80
- 6-way power splitter $ 10.50
-
Hard drive error or full
"HDD error", "no disk" or only a few days of footage. 2TB is like-for-like; 4TB doubles your history.
- 2TB surveillance hard drive $ 268.00
- 4TB surveillance hard drive $ 312.80
-
Mounting a camera
Junction boxes hide the cable join and keep it dry; the wall bracket turns a dome to face out.
- Bullet camera junction box $ 29.88
- Large dome junction box $ 33.50
- Dome right-angle wall bracket $ 68.50
-
Wi-Fi, mouse & control
Put the recorder on Wi-Fi without a network cable, or replace a lost mouse.
- USB Wi-Fi antenna $ 36.50
- USB mouse $ 15.80
Which power supply fits my Swann?
Find your recorder’s model, then check the volts, amps and plug match your old adapter.
| Your Swann | Plug | Rating | Power supply |
|---|---|---|---|
| NVR 8-channel NVR8-8580, 8580RN, 8780, 8600 SWNVR-88580H | Round 4-pin | 48V 1.5A |
Most popular
|
| NVR 16-channel NVR16-8580, 8580RN NVR-168580 | Round 4-pin | 48V 3.75A |
16Ch recorders
|
| NVR 4 & 8-channel NVR-7300, 7400, 7285 Adapter GQ90-480187-E1 | Barrel, centre pin | 48V 2A |
|
| DVR 4 & 8-channel Swann DVRs Label reads 12V 2A | 2.1mm barrel | 12V 2A |
Most popular
|
| DVR 16-channel DVR16-5580, 4980, 4680, 4580 Adapter CS-1205000 | 2.1mm barrel | 12V 5A |
|
| Cameras Up to 4 analogue cameras Includes 4-way splitter | 2.1mm barrel | 12V 2A |
Most popular
|
Swann parts questions
Can I use a generic power supply on my Swann NVR?
We don't recommend it. Original supplies are designed to work with your recorder: Swann NVRs run on 48V and also power every camera over PoE, so the wrong adapter causes reboots and cameras dropping out. Many cheap aftermarket supplies don't carry Australian electrical approval, which makes them illegal to use here, can void your warranty and can be a fire or shock risk. Only use an Australian-approved supply, like the ones on this page, matched to Swann's original ratings.
Will a new hard drive keep my old recordings?
No. Footage lives on the old drive. After you fit the new drive the recorder formats it and starts recording again. Your cameras, settings and app access stay on the recorder.
Which hard drive size should I choose?
2TB replaces the standard drive like-for-like. 4TB roughly doubles how many days of footage you keep. Both are 3.5" SATA surveillance drives built for 24/7 recording and suit Swann 4, 8 and 16-channel DVRs and NVRs.
How many cameras can one 12V 2A supply run?
Usually up to four analogue cameras through a splitter, as most draw 200 to 500mA. Cameras with strong infrared or long cable runs are best on their own adapter.
I can't find my model. Can you help?
Yes. Email a photo of the label under your recorder and the label on your old adapter to [email protected] and we will confirm the right part before you order.
Swann Original Replacement DVR Power Supply Suit Swann DVR's 42-46/85/86 Models
Swann Replacement Hard Drive 2TB for DVR & NVR - Toshiba 3.5-inch Surveillance HDD...
Swann Upgrade/Replacement Toshiba 4TB Hard Disk suits all DVR & NVR models
Sale ends Fri 13 Nov