Allows you to position a Swann NHD Camera in a shed or at a long distance from the NVR Recorder using line of sight wireless signal. Replaces the Cable with a Wireless Point to Point set of antennas.
SR-ExANT-SW8580
5.8GHz WiFi access point with in-built long range directional antenna designed for use as a wireless network bridge. includes 2 x preconfigured Antennas for PTP (point-to-point) or for PTMP (point-to-multi-point) - 1 to 1 OR 1 to many.
Simple to install and can support 1 camera or many with the use of a network switch, please contact us to discuss this setup. Multiple Cameras to Multiple locations can be achieved however will require some configuration.
Additional Antennas available, or a preconfigured 3 antenna kit is also avaialble.
What Power is required?
Transmitter Antenna: Positioned on an outside wall in clear sight of the shed/barn or remote site. This is cabled to the NVR location and power and data are fed down this cable.
Receiver Antenna/s positioned at Camera lcation where PoE(48V) or 240V Power is required.
• Creates a very fast link that can support up to 8 cameras - this will depend on distance and quality of signal. Obstructions, long distance, camera bandwidth, may all contribute to reducing the available speed.
• Dual LAN/WAN ports with PoE
• Strong signal with dual antenna design
• Up to 5km point-to-point range (no obstructions) - - for longer distances absolute clear terrain and positioning of antennas important.
• 60°(H) / 30°(V) signal angle
• Pole, wall and rack mountable
• Operates in extreme temperatures from -40°C to 55°C
• IP65 weather resistance for outdoors use
2 x WiFi access point
2 x PoE power adapter
4 x Stainless ties for pole mount
2 x Power cable
1 x Instruction manual
Using these Wireless Antennas will allow you to run your Swann CCTV IP NVR Cameras on a farm, barn, shed, remote site, granny flat, remote office, garage, horse stables, horse arena, rural, outskirts, cabin, shack, man cave, pool house, warehouse.
