Long Range Antennas to suit Swann 8580 Series NVR Cameras - Preconfigured 5.8Ghz

Preconfigured to suit Swann 8580 NVR's @ 5.8GHz Wireless Signal

 

SR-ExANT-SW8580

 

5.8GHz WiFi access point with in-built long range directional antenna designed for use as a wireless network bridge. includes 2 x preconfigured Antennas for PTP (point-to-point) or for PTMP (point-to-multi-point) - 1 to 1 OR 1 to many.

Simple to install and can support 1 camera or many with the use of a network switch, please contact us to discuss this setup. Multiple Cameras to Multiple locations can be achieved however will require some configuration.

Additional Antennas available, or a preconfigured 3 antenna kit is also avaialble.

What Power is required?

Transmitter Antenna: Positioned on an outside wall in clear sight of the shed/barn or remote site. This is cabled to the NVR location and power and data are fed down this cable.

Receiver Antenna/s positioned at Camera lcation where PoE(48V) or 240V Power is required.

Product Features:

 

• Creates a very fast link that can support up to 8 cameras - this will depend on distance and quality of signal. Obstructions, long distance, camera bandwidth, may all contribute to reducing the available speed.

• Dual LAN/WAN ports with PoE 

• Strong signal with dual antenna design

• Up to 5km point-to-point range (no obstructions) - - for longer distances absolute clear terrain and positioning of antennas important.

• 60°(H) / 30°(V) signal angle

• Pole, wall and rack mountable 

• Operates in extreme temperatures from -40°C to 55°C

• IP65 weather resistance for outdoors use

 

What's Includes:

 

2 x WiFi access point

2 x PoE power adapter

4 x Stainless ties for pole mount

2 x Power cable

1 x Instruction manual

Using these Wireless Antennas will allow you to run your Swann CCTV IP NVR Cameras on a farm, barn, shed, remote site, granny flat, remote office, garage, horse stables, horse arena, rural, outskirts, cabin, shack, man cave, pool house, warehouse.