Genuine Swann 1 to 4 Way Power Cable Splitter Multiplier CCTV Security Cameras
- Simple and look Professional for wiring
- Easiest for CCTV Camera Installation Saves Time and Money
- Easy to use
- Materials (External): PVC Plastic
- Total Length: About 22 ~ 25 cm
- USED For any 2.1mm male DC power adapter
- Plug Diameter: 5.5mm outer, inner 2.1mm
- Connector Type: 5.5 * 2.1mm 1 * Female To 4 * Male Cable
- Includes Swann Theft-Detterence Sticker Pack
Genuine Swann Factory made Power Splitter 4-Way Swann CCTV AC/DC General Power 2.1mm -> 1 Female 2.1mm Socket to 4x Male(Plugs) 2.1mm
Need to split one Power Supply to 4? this is the solution
Includes Swann Theft-Detterence Sticker Pack
SR-DCSP-1F4M
Power Splitter DC 4Way - 1xFemale 2.1mm Socket to 4xMale 2.1mm Plugs - Perfect for CCTV and General Purpose DC Requirements. This is a very simple splitter cable perfect for using multiple cameras on 1 power supply. One female 2.1mm DC socket then 25cm cable and 4 x Male 2.1mm Plugs. It is very important to ensure the total load of the cameras does NOT exceed the output current of your power supply.
Run multiple devices from a single power supply or extend the low voltage cable between a plug pack and a device. Ideal for surveillance applications and available in a range of versions to suit many applications. All cables pre-made with molded DC plugs and sockets.
Simple calculations --> applies to all splitters:
If you have 8 cameras using 300mA each = 2.4Amps - you need a minimum 2.5Amp power supply, preferably 3Amps.
Cam1+Cam2+......+Cam8 = Total Current Required. (example for 8-way)