IVSEC Hybrid 4-Camera DVR Kit | 4MP Dome Cameras • 12-Channel 2TB Recorder • Coax-Compatible System
Kit Code: IVDVK8-504D — Compatible with many older coax-based CCTV cameras
This custom IVSEC 4-camera DVR kit is designed for homes and small businesses that already have coaxial cabling installed from a previous CCTV system. The included IVSEC Hybrid 12-Channel DVR/IP Recorder (2TB HDD) works with most AHD/TVI/CVI analogue cameras as well as IP cameras, making it a flexible upgrade path for mixed environments.
The hybrid recorder allows you to reuse existing BNC coax cables from many older CCTV systems, including compatibility with a wide range of legacy Swann, Hikvision-compatible, and other analogue HD cameras. Start with analogue today, then add IP cameras later via a network switch for higher resolution, AI features, and NVR-style performance.
What’s Included in this DVR Kit
- 1× IVSEC Hybrid 12-Channel DVR / IP Recorder with 2TB HDD pre-installed
- 4× IVSEC IVAHD-C509B 4MP Analogue HD Dome Cameras (30m IR, IP66 outdoor-rated)
- Recorder power supply, mouse and included accessories
- Cables not included — reuse your existing coax/BNC & power leads where appropriate
Key Features & Benefits
- Hybrid DVR kit supports both analogue and IP cameras
- Compatible with many older Swann analogue HD cameras (AHD/TVI/CVI over BNC)
- 2TB HDD installed for long-duration CCTV recording
- 4MP dome cameras with 2K resolution and 30m night vision
- Use existing coax cables for a simple, cost-effective installation
- Future-ready — add IP/PoE cameras by connecting a network switch
- Smart detection and remote app viewing supported
- 12-channel hybrid design for flexible expansion
- Ideal for replacing older analogue DVRs without rewiring the site
4× IVSEC 4MP Analogue HD Dome Cameras
- 4MP 2K resolution for crisp imaging
- 30m IR night vision for low-light performance
- IP66 weatherproof metal dome housing
- Wide-angle 3.6mm fixed lens
- AHD/TVI/CVI output — compatible with BNC DVR inputs
Hybrid DVR: Analogue Today, IP Tomorrow
The IVSEC hybrid recorder allows a smooth upgrade path. Use your existing coax cameras now, then add IP cameras later by simply connecting a PoE network switch. This provides the same flexibility as an NVR system while retaining compatibility with your current CCTV cabling.
Ideal For
- Homes with existing coax CCTV wiring
- Businesses upgrading older analogue DVRs
- Sites needing a mix of analogue and IP cameras
- Users planning to add higher-end IP cameras later
Before you order:
- Ensure your existing system uses standard BNC coax connections
- Verify compatible analogue formats (AHD / TVI / CVI)
- Consider future IP camera upgrades to size your PoE switch correctly
- Confirm recording duration needed for 2TB capacity
Design & Compatibility Check: Tell us your existing coax camera model and cable setup. We’ll confirm compatibility and provide a complete bill of materials based on your site requirements.
Compatibility varies by camera model and signal standard. Always verify before installation.
