Purpose-built for conversion work where maintaining installed field wiring is a priority.

Designed to bridge older 2-wire sites into an IP intercom environment

The AK-2-WIREIPKITK is intended for retrofit applications where an original 2-wire backbone remains serviceable. Instead of pulling new structured cabling to every endpoint, the kit introduces the required conversion components so the project can move toward an IP-based Akuvox intercom solution while making use of existing cable routes.

Included in the kit is a 48V power supply and a dedicated 2-wire switch, giving installers the foundational hardware needed to support a 2-wire to IP upgrade. For apartment upgrades, tenancy refurbishments and common-area entry renewals, that translates into lower disruption, less civil work and faster return-to-service compared with full cable replacement.

Core conversion hardware supplied for practical field deployment

This kit is not just a label for a retrofit concept — it includes the key conversion pieces required on site. The bundled 48V power supply provides the stated system power input for the supplied hardware, while the included 2-wire switch functions as the interface point for adapting legacy 2-wire runs into the broader IP intercom architecture.

For installers, that matters because retrofit projects live or die on predictable scope. Knowing the kit includes the 2-wire switch and power supply simplifies quoting, reduces parts chasing and provides a clearer baseline when pairing the conversion hardware with compatible Akuvox entry panels, indoor monitors or broader access control endpoints.

Well suited to refurbishment, strata and multi-entry upgrade work

Where walls are finished, pathways are congested or access to resident areas is limited, cable preservation becomes a serious project advantage. A 2-wire IP conversion kit is particularly useful in strata complexes, older apartment blocks, townhouse developments and commercial buildings where the existing intercom backbone still offers a viable physical layer for upgrade.

Because this is an Akuvox-branded kit, it provides a cleaner path when standardising on the Akuvox ecosystem across entry, indoor communication and associated access workflows. Installers can treat it as a retrofit enabler: retain the field cabling where appropriate, modernise the front-end equipment and reduce unnecessary disruption to tenants or building managers.

How the retrofit path typically works

Exact topology depends on the site and the compatible Akuvox endpoints selected, but the conversion logic is straightforward for experienced installers.

A legacy cabling method commonly used in older intercom systems, often reused in retrofit conversions.

An intercom platform using Internet Protocol networking for communication, device management and system integration.

An upgrade approach that works within an existing building and its installed infrastructure rather than rebuilding from scratch.

A 48-volt power supply unit used to energise system hardware where specified by the manufacturer.

The hardware interface used to connect legacy 2-wire field wiring into the intended IP-based intercom topology.

A field device such as a door station, indoor monitor or related access terminal connected to the system.

The final setup process where hardware is addressed, powered, tested and integrated into the operational system.

The main cable path linking field devices back to the control or switching point within the intercom system.

A building still in use during works, where low-disruption upgrade methods are usually preferred.

A full cable replacement strategy, often avoided in retrofit projects when legacy pathways can be reused.

Akuvox door stations

Use with compatible Akuvox entry panels when replacing older front-door intercom hardware during the IP migration.

Akuvox indoor monitors

Suitable for unit, office or concierge endpoints where the project includes refreshed internal intercom interfaces.

Lock control hardware

Pair with compliant strikes, maglocks or gate release interfaces where the intercom is part of an entry control workflow.

Supporting IP infrastructure

Allow for switching, uplink paths and any required network segregation when the converted system joins the wider site LAN.

Does this kit let me keep existing 2-wire intercom cabling?

Yes — that is the stated purpose of the kit. It is designed for upgrading existing 2-wire intercom infrastructure to IP, which makes it relevant where retaining installed cabling is desirable.

What is included in the AK-2-WIREIPKITK?

Verified inclusions from the source are a 48V power supply and a 2-wire switch. Additional compatible field devices such as door stations or indoor monitors would be selected according to the project design.

Is this a complete intercom system on its own?

Based on the provided information, it should be treated as a conversion kit rather than a full standalone door-entry package. It enables the 2-wire to IP upgrade path and is typically paired with compatible Akuvox intercom endpoints.

Where is this kind of kit most useful?

It is especially useful in retrofit environments such as apartment buildings, strata complexes, townhouses and refurbishments where new cable installation would be disruptive or cost-prohibitive.

Why does the included 48V power supply matter?

Including the stated 48V PSU gives installers a defined power component for the supplied conversion hardware, reducing uncertainty during quoting and staging of the retrofit works.

Should compatibility be checked before ordering?

Absolutely. Confirm compatibility with the intended Akuvox door stations, indoor monitors, lock interfaces and site topology before deployment, particularly on larger or mixed-generation upgrades.