Skip to main content
  • New
Akuvox KF01 grey key fob — front and back
Akuvox KF01 key fob on a cord
Akuvox KF01 key fob tapped on Akuvox door phones
1 / 3

Akuvox KF01 Grey 13.56 MHz MIFARE Classic-Compatible Key Fob — AK-KF01

SKU AK-KF01 CALL stock OR Max avail. in cart
$2.20 inc GST

Akuvox KF01 is the grey, entry-level fob in Akuvox’s KF range: a Fudan chip that reads like a MIFARE Classic 1K card, in a tough PC+ABS shell with a key-ring slot. Tap it on an Akuvox door phone or access terminal. Sold as a single fob.

  • ✓Fudan chip, MIFARE Classic 1K compatible, 13.56 MHz ISO 14443A
  • ✓1 KB EEPROM · over 10 years data retention · 100,000 write cycles
  • ✓Grey PC+ABS fob with key-ring slot, 44.6 × 34.5 × 6 mm
  • ✓Passive, no battery · sold singly

 
Akuvox · KF01 · MIFARE Classic-compatible key fob

On the key ring.
Tap to enter.

The AK-KF01 is Akuvox’s KF01 key fob. Its Fudan chip is compatible with MIFARE Classic 1K, so it enrols and reads on any Akuvox device that takes S50 cards and F08 fobs. Each SKU is one fob.

This SKU is one key fob.

You receive a single KF01 fob. Akuvox door phones, access terminals and the ACR-CID01 desktop reader are sold separately.

In the box
  • 1 × Akuvox KF01 key fob
What you also need(sold separately)
  • Akuvox door phone or access terminal with a 13.56 MHz reader
  • Akuvox ACR-CID01 (optional) for desk enrolment

The everyday fob.

The KF01 is the value choice for apartments and offices already using MIFARE Classic cards. For a genuine NXP chip choose the KF02; for encrypted DESFire security choose the KF03.

Akuvox KF01 grey key fob on a cord

Fob

A shell built for key rings.

The PC+ABS body resists knocks and cracking, and the slot takes a key ring or lanyard.

Akuvox says it reads reliably even beside keys, coins or the body, with no battery to replace.

Tap to enter

Tap on the reader.

Hold the fob over the card area of an Akuvox door phone or access terminal and the door releases.

Data retention is over 10 years, with at least 100,000 write cycles.

Hand tapping an Akuvox KF01 grey key fob on Akuvox door phones

Pair it with

Reads on these Akuvox devices

Door

Akuvox R20K

Keypad door phone with a built-in 13.56 MHz card reader.

Access

Akuvox A08S

Slim access terminal for internal doors and gates.

Enrol

Akuvox ACR-CID01

USB desktop reader for enrolling fobs at a desk.

Downloads

Datasheets and guides

Compliance certificates and technical documents are available on request for tenders and installers — send an enquiry.

Answers

Common questions

How do the KF01, KF02 and KF03 differ?

Same fob shell, different chip. The grey KF01 has a Fudan chip that is MIFARE Classic compatible; the orange KF02 has a genuine NXP MIFARE Classic S50 chip; the blue KF03 has an NXP MIFARE DESFire EV3 chip with AES encryption, 8 KB memory and EAL5+ certification, the hardest of the three to copy.

Is this one fob or a pack?

One fob. Order the quantity you need.

Which Akuvox devices read it?

Akuvox door phones and access terminals with 13.56 MHz MIFARE readers, including A01, A02, A03, A05 V2, A08, E12 V2, E16 V2, E18, R20 V5, R25, R27, R28 V2, R29, S532, S535, S539, X910, X912, X915 V2 and X916 on current firmware.

How do I enrol it?

On the device’s user page click Obtain and hold the fob on the reader, or capture it at a desk with the Akuvox ACR-CID01 USB reader.

How is it different from the F08 fob?

Both use a Fudan MIFARE Classic-compatible chip. The KF01 is a newer, slightly larger grey fob (44.6 × 34.5 × 6 mm) in a PC+ABS shell; the F08 is a white PVC teardrop.

Can it be encrypted?

Yes, like a MIFARE Classic card: write a sector key with the Akuvox ACRM tool and an ACR-CID01, then enter the same key on each device.

Does it need a battery?

No. It is passive and powered by the reader’s field.

Fobs ready to issue.

KF01 fobs enrol at any Akuvox door phone or ACR-CID01 desktop reader, so new residents can be issued a fob in minutes.

Installation & safety notice

Passive fob with no battery or wiring.

Memory
1 KB EEPROM
Frequency
13.56 MHz
Material
PC + ABS
Colour
Grey
Working Temperature
−20 °C to +50 °C
Brand
Akuvox
Standard
ISO 14443A
Size
44.6 × 34.5 × 6 mm
Warranty
Australian warranty
Product Type
RFID key fob
Model
KF01
Card Technology
Fudan chip, MIFARE Classic 1K compatible
Pack Quantity
1 fob
Data Retention
More than 10 years
Write Endurance
100,000 cycles minimum
INFRONTTECH Promotional BannerINFRONTTECH Promotional BannerINFRONTTECH Promotional Banner

Need help choosing?

Tell us about your property and we'll recommend the right cameras and recorder.

07 5609 4910

Sydney 02 8814 6008
[email protected]

Mon–Fri, 9am–5pm AEST

Product added to wishlist