- New
Grandstream GS-POE60W-MG 10-Gigabit 60W PoE Injector — GR-GS-POE60W-MG
60 W multi-Gig PoE injector. 10 GigE.
Grandstream GS-POE60W-MG midspan injector — power PoE/PoE /PoE endpoints over multi-Gig Ethernet uplinks.
- ✓Up to 60 W PoE budget class
- ✓Multi-Gig / 10 GigE capable port design
- ✓Powers APs, cameras, phones & more
- ✓Plug-in midspan — no switch rip-and-replace
60 W PoE.
10-Gigabit multi-gig injector.
The Grandstream GS-POE60W-MG is a plug-and-play PoE injector with 10-Gigabit RJ45 in/out and up to 60 W PoE output (IEEE 802.3af/at/bt) — power APs, phones and other PoE loads when the switch is not PoE-capable.
Product shot may differ from the actual product.
ADD-ON POWER — GR-GS-POE60W-MG
Inline injector between switch and powered device. Requires AC mains and compatible PoE PD.
- PoE injector
- AC power cord / adapter per packing list
Confirm final packing list on the manufacturer QSG / datasheet.
- Non-PoE (or insufficient PoE) switch port
- Cat cable run to the PD
- Device within the injector’s PoE budget
Unsure what’s compatible? Contact Infront Technologies before ordering — we’ll confirm the rest of the bill of materials.
Grandstream hardware. Australian support.
Shipped and supported by Infront Technologies — a team that designs and maintains professional UC, intercom and networking systems every day.
POWER · 01
Up to 60 W PoE output.
Supports IEEE 802.3af/at/bt class loads up to 60 W.
54 VDC output suitable for Grandstream APs, phones and many third-party PDs.
SPEED · 02
10-Gigabit multi-gig path.
1× 10GbE LAN IN and 1× 10GbE LAN OUT with PoE — keep multi-gig AP uplinks intact.
Status LEDs for power-on and PoE load.
SIMPLE · 03
Plug-and-play — no config UI.
Drop into the path between switch and device; no software to maintain.
Family includes 15 W / 30 W variants for lighter loads.
How it works
From unbox to live service.
01
Mains
Plug the injector into AC power.
02
IN
Patch switch → injector LAN IN.
03
OUT
Patch injector PoE OUT → device.
04
Check LEDs
Confirm power and PoE load indicators.
At a glance
Key specs — GR-GS-POE60W-MG
Verify final specifications on the current Grandstream datasheet before ordering.
Answers
Frequently asked questions
Will it power a Wi-Fi 7 AP?
Confirm the AP’s max draw — many indoor APs are within 30 W; high-power units may need the 60 W model.
Need PoE where the switch isn’t PoE?
Grandstream professional UC hardware from Infront Technologies. Call 1300 736 970 or email [email protected].
Installation & safety notice
Professional ICT product. The GR-GS-POE60W-MG is networking / unified-communications equipment. Install and configure according to the Grandstream documentation for your firmware revision. PoE and mains-powered accessories must be used with compatible injectors, switches or the supplied PSU only.
When a licensed tradesperson is required. New structured cabling, rack mains, or modifications to premises wiring must be performed by appropriately licensed / registered trades under applicable Australian rules (including AS/NZS 3000 and AS/CA S009 where relevant).
Specifications & imagery in good faith. Features and published imagery can change without notice at Grandstream’s discretion. Confirm the current datasheet before ordering. Appearance and packaging may differ from marketing images.
By ordering you confirm the product is fit for your intended use. Infront Technologies does not accept liability for incorrect site preparation or use outside the manufacturer’s specifications.
- Type
- PoE midspan injector
- Form Factor
- PoE injector
- Ethernet / Network
- 10 Gigabit Ethernet
- Brand
- Grandstream
- Max. Output Power
- 60W
- Network
- Multi-Gig / 10 GigE capable
- Power budget
- Up to 60 W class
- Role
- Power + pass-through data
- Use cases
- Wi-Fi APs, IP cameras, VoIP phones
- Install
- Inline between switch and device