- New
Akuvox S50 Black 13.56 MHz MIFARE Classic 1K ISO Card — AK-CARD-S50
or 4 interest-free payments of $1.48 with
Akuvox S50 is a 13.56 MHz MIFARE Classic 1K card in standard ISO card size, slot-punched for a lanyard. It is Akuvox’s everyday card for its door phones and access terminals. Sold as a single card. Stocked in Australia by Infront Technologies.
- ✓MIFARE Classic 1K (S50), 13.56 MHz, ISO 14443A
- ✓Reads on Akuvox door phones and access terminals with 13.56 MHz readers
- ✓Slot-punched PVC card, 85.5 × 54 × 0.86 mm
- ✓Data retention over 10 years · 100,000 write cycles · sold singly
The everyday card
for Akuvox doors.
The AK-CARD-S50 is Akuvox’s MIFARE S50 card: a 13.56 MHz, 1K ISO card for residents, staff and contractors. Each SKU is one card.
This SKU is one card.
You receive a single S50 card. Akuvox door phones, access terminals and the ACR-CID01 desktop reader are sold separately.
- 1 × Akuvox S50 MIFARE Classic 1K card
- Akuvox door phone or access terminal with a 13.56 MHz reader
- Akuvox ACR-CID01 (optional) for desk enrolment and card keys
Cost-effective, widely supported.
MIFARE Classic 1K is supported by most Akuvox readers, so one card type can cover the front door, car park and internal doors.

Card
Black front, white reverse.
A slot-punched PVC ISO card at 85.5 × 54 × 0.86 mm that fits a wallet or a lanyard clip.
1K EEPROM, ISO 14443A, over 10 years data retention and at least 100,000 write cycles.
At a glance
Key specs — AK-CARD-S50
- Brand
- Akuvox
- Reference
- AK-CARD-S50
- Card technology
- MIFARE Classic 1K (S50)
- Frequency
- 13.56 MHz
- Standard
- ISO 14443A
- Memory
- 1K EEPROM
- Material
- PVC, slot-punched
- Size
- 85.5 × 54 × 0.86 mm
- Data retention
- More than 10 years
- Write endurance
- 100,000 cycles minimum
- Working temperature
- −20 °C to +50 °C
- Pack quantity
- 1 card
- Warranty
- Australian warranty via Infront Technologies
Pair it with
Reads on these Akuvox devices
Door
Akuvox R20K and R25K
Door phones with built-in 13.56 MHz card readers.
Access
Akuvox A08
Access terminal for internal doors and gates.
Enrol
Akuvox ACR-CID01
Desktop reader to enrol cards and set card keys.
Answers
Common questions
Is this one card or a pack?
One card. Order the quantity you need.
Which Akuvox devices read it?
Akuvox lists Akuvox MIFARE cards as supported on A01, A02, A03, A05 V2, A08, E12 V2, E16 V2, E18, R20 V5, R25, R27, R28 V2, R29, S532, S535, S539, X910, X912, X915 V2 and X916 with current firmware.
Can the card be encrypted?
Yes. Akuvox supports encrypted MIFARE Classic reading; write the sector key with the ACRM tool and an ACR-CID01, then set the same key on the device.
Will it work on 125 kHz readers?
No. It is a 13.56 MHz card. 125 kHz-only readers will not read it.
Cards in stock, ready to issue.
Order S50 cards with your Akuvox door phones from Infront Technologies for Australian stock and enrolment advice.
Installation & safety notice
Passive card with no battery or wiring.
- Memory
- 1K EEPROM
- Frequency
- 13.56 MHz
- Material
- PVC, slot-punched
- Colour
- Black front, white reverse
- Brand
- Akuvox
- Standard
- ISO 14443A
- Size
- 85.5 × 54 × 0.86 mm
- Warranty
- Australian Warranty via Infront Technologies
- Product Type
- RFID access card
- Model
- S50
- Card Technology
- MIFARE Classic 1K (S50)
- Pack Quantity
- 1 card








































