Skip to main content
1 / 3

Swann Antenna SWACC-USBWIFI | USB Wi-Fi for DVR & NVR

SKU SWACC-USBWIFI-GL In Stock - Ready to Ship
$36.50 inc GST

Swann SWACC-USBWIFI: the plug-and-play 2.4GHz USB Wi-Fi antenna that puts a compatible Swann DVR or NVR on your Wi-Fi without a network cable to the router.

  • ✓2.4GHz Wi-Fi, up to 65 ft (about 20 m)
  • ✓Plugs into a free USB port on the recorder
  • ✓Recorder software V8 or later
  • ✓Swann DVR 4480 to 5880 and NVR 8580, 8600, 8780 series
  • ✓Gen1 black antenna, the one Swann lists for these models

 

Swann USB Wi-Fi Antenna for DVR or NVR

SWACC-USBWIFI-GL

Description

Swann SWACC-USBWIFI black USB Wi-Fi antenna with its swivel whip and USB-A plug
Swann · Gen1 USB Wi-Fi antenna · 2.4GHz

Put your Swann recorder on Wi-Fi.
No network cable to the router.

The SWACC-USBWIFI plugs into a free USB port on a Swann DVR or NVR and joins your 2.4GHz Wi-Fi, so the recorder can sit away from the router and still reach the Swann Security app.

In one sentence: the SWACC-USBWIFI-GL is Swann's plug-and-play 2.4GHz USB Wi-Fi antenna (Gen1, black) that connects a compatible Swann DVR or NVR running software V8 or later to your Wi-Fi, with up to 65 ft (about 20 m) range.

Check two things first: your recorder model and its software.

Swann lists this antenna for the DVR and NVR models under Compatible models below, and the recorder must run software V8 or later (Menu, System, Information). It joins 2.4GHz Wi-Fi only, so your router must broadcast a 2.4GHz network. It is not a range extender for wireless cameras.

In the box
  • SWACC-USBWIFI USB Wi-Fi antenna
You also need
  • A compatible Swann DVR or NVR with a free USB port
  • A 2.4GHz Wi-Fi network in range of the recorder

The recorder goes where it is safe, not where the router is.

A Swann recorder normally needs a network cable to the router for the app and remote viewing. With the antenna fitted, the recorder can live in a cupboard, study or roof space within Wi-Fi range, out of reach of anyone who wants to take the footage with them. Swann's own support notes say a cable is still the most dependable link, and Wi-Fi is the tidy option when a cable run is not practical.

Close-up of the SWACC-USBWIFI USB-A plug and the swivel joint at the base of the antenna, cropped from Swann's product photo

The plug

Standard USB plug, swivel antenna.

It plugs straight into a USB port on the recorder. The antenna swivels at the base, so it can stand upright whether the port is on the front or the back.

Swann's image of the black USB Wi-Fi antenna fitted to a Swann recorder's USB port, linking to a Wi-Fi router

How it connects

Recorder to router over 2.4GHz Wi-Fi.

Swann's own image: the antenna in the recorder's USB port, beside the network socket it replaces, talking to the router over 2.4GHz. Swann quotes up to 65 ft (about 20 m); walls, floors and other devices reduce that.

Set up

Online in a few minutes.

01

Check the software

On the recorder go to Menu, System, Information. The software version must be V8 or later. Update it first if it is older.

02

Plug in the antenna

Fit the antenna into a free USB port on the recorder and stand the whip upright.

03

Join your Wi-Fi

Open the recorder's network settings, change the connection from wired to Wi-Fi, pick your 2.4GHz network and enter the password.

04

Check the app

Open the Swann Security app and confirm live view and playback work over Wi-Fi before you move the recorder to its new spot.

Where it is used

Where it is used

Family homes

Modem in the lounge, recorder in the study or wardrobe, no cable through the ceiling.

Rentals and apartments

No drilling or cable runs, and it comes with you when you move.

Small shops

Recorder off the counter and out of sight, still on the shop Wi-Fi for the app.

Home offices

Keep the recorder in a cupboard away from the desk and the router.

Granny flats and garages

When the recorder sits in a building of its own within Wi-Fi range of the house.

Holiday houses

Check in on the cameras from the app without running new network cable.

Pair it with

What else to check

Software

Recorder on an older version?

The antenna needs recorder software V8 or later. Update the recorder over a network cable first, then switch it to Wi-Fi.

Wired

Recorder next to the router?

Then a network patch lead is the most dependable link and you may not need the antenna at all.

Part check

Not sure it fits?

Email the model on your recorder's underside label to [email protected] and we will check it against Swann's list before you buy.

SWACC-USBWIFI or the newer SWACC-USBWIFIV2

SWACC-USBWIFI (this antenna)SWACC-USBWIFIV2
GenerationGen1, blackGen2, white
Wi-Fi band2.4GHzDual band
Range (Swann)Up to 65 ftUp to 65 ft
Made forSwann DVRs and NVRsMaxRanger hubs and Swann DVRs and NVRs
Recorder supportThe models listed below, software V8 or laterFewer recorders; some need Swann's April 2025 firmware first

Both rows come from Swann's support pages and its camera and accessory compatibility chart. If your recorder is in the list below, this Gen1 antenna is the one Swann lists for it.

Common questions

Will it work on my Swann recorder?

Yes, if your recorder is on Swann's list under Compatible models below and runs software V8 or later. That covers the DVR4, DVR8 and DVR16 4480 to 5880 series and the NVR8 and NVR16 8580, 8600 and 8780 series.

How do I check my recorder's software version?

On the recorder go to Menu, System, Information. It must show V8 or later. If it is older, update it over a network cable first.

Does it work on 5GHz Wi-Fi?

No. It joins 2.4GHz networks only. Most dual-band routers also broadcast a 2.4GHz network; connect the recorder to that one.

How far can the recorder be from the router?

Swann quotes up to 65 ft, about 20 m. Brick walls, floors, metal cabinets and other wireless devices shorten that, so test the signal where the recorder will live.

Should I buy this or the V2 antenna?

Buy this one if your recorder is on the list below. Swann's chart shows the dual-band V2 works on fewer recorders, and some only accept it after a firmware update.

Will any USB Wi-Fi dongle work instead?

We cannot promise it. Swann only lists its own antennas for these recorders, so other dongles may not be recognised.

Is Wi-Fi as reliable as a network cable?

Not quite. Swann's own advice is that a cable is the most dependable link, while Wi-Fi can occasionally drop when other devices interfere. Wi-Fi is the tidy option when a cable run is not practical.

Does it make my wireless cameras reach further?

No. It only connects the recorder to your router. It does not extend camera range or power anything.

Which port does it go in?

Any free USB port on the recorder. The antenna swivels, so stand it upright whether the port is on the front or the back.

Does it work with a MaxRanger kit?

Swann lists the NVW-MR4K MaxRanger4K base station for this antenna. Other MaxRanger hubs are matched to the V2, so check your model with us first.

What do I need to set it up?

A compatible recorder with a free USB port, your 2.4GHz Wi-Fi name and password, and the Swann Security app to check live view afterwards.

Can you check my model before I order?

Yes. Send the model on the recorder's underside label to [email protected] or call 1300 736 970 and we will confirm against Swann's list.

Supported by InFront Technologies.

Not sure it fits your recorder? Call 1300 736 970 or email the model on the recorder's underside label to [email protected] and we will check it before you buy.

Installation and safety

Recording laws. CCTV and audio recording are covered by state surveillance laws. Point cameras at your own property and tell visitors and staff that cameras are in use.

Keep the recorder secure. Moving the recorder out of sight protects the footage. Keep it ventilated and away from heat, not sealed in a cupboard.

Wi-Fi security. Use a strong Wi-Fi password and keep the recorder software up to date.

What it does not do. It does not join 5GHz-only networks, does not extend wireless camera range and does not power anything.

Figures. From Swann's support pages for SWACC-USBWIFI and Swann's compatibility chart.

Model numbers

Swann DVR4-4480G, Swann DVR4-4480RN, Swann DVR4-4480V, Swann DVR4-4580G, Swann DVR4-4580RN, Swann DVR4-4580V, Swann DVR4-4680, Swann DVR4-4680RN, Swann DVR4-4685, Swann DVR4-4685RN, Swann DVR4-4780V, Swann DVR4-4980V, Swann DVR4-5580, Swann DVR4-5580G, Swann DVR4-5580RN, Swann DVR4-5680, Swann DVR4-5680RN, Swann DVR8-4480G, Swann DVR8-4480RN, Swann DVR8-4480V, Swann DVR8-4580G, Swann DVR8-4580RN, Swann DVR8-4580V, Swann DVR8-4680, Swann DVR8-4680A, Swann DVR8-4680RN, Swann DVR8-4685, Swann DVR8-4685RN, Swann DVR8-4780V, Swann DVR8-4880RN, Swann DVR8-4980, Swann DVR8-5580, Swann DVR8-5580A, Swann DVR8-5580G, Swann DVR8-5580RN, Swann DVR8-5580RU, Swann DVR8-5680, Swann DVR8-5680A, Swann DVR8-5680RN, Swann DVR8-5680RU, Swann DVR8-5880RU, Swann DVR16-4580G, Swann DVR16-4580RN, Swann DVR16-4580V, Swann DVR16-4680, Swann DVR16-4680A, Swann DVR16-4680RN, Swann DVR16-4680RU, Swann DVR16-4880RU, Swann DVR16-4980, Swann DVR16-5580, Swann DVR16-5580G, Swann DVR16-5580G2, Swann DVR16-5580RU, Swann NVR8-8580, Swann NVR8-8580RN, Swann NVR8-8580RU, Swann NVR8-8600RU, Swann NVR8-8780, Swann NVR8-8780RN, Swann NVR16-8580, Swann NVR16-8580RN, Swann NVR16-8580RU, Swann NVR16-8600RU, Swann NVR16-8780, Swann NVR16-8780RN, Swann NVW-MR4K, Swann DVR4-4680XN, Swann DVR4-4680XU, Swann DVR4-4685XU, Swann DVR4-5680XN, Swann DVR8-4680X, Swann DVR8-4680XN, Swann DVR8-4680XU, Swann DVR8-4685XU, Swann DVR8-5680X, Swann DVR8-5680XU.

This list is Swann's published list for SWACC-USBWIFI (Swann support, October 2026). Recorder software must be V8 or later. If your model is not listed, ask us before you buy.

Swann USB Wi-Fi Antenna for DVR or NVR

SWACC-USBWIFI-GL

Wireless
Wi-Fi 802.11 b/g/n (2.4 GHz)
Type
USB Wi-Fi Antenna
Frequency
2.4 GHz
Colour
Black
Interface
USB
Brand
Swann
Connectivity
WiFi
Manufacturer Warranty
2 Year Warranty
Model
SWACC-USBWIFI
Compatibility
Swann DVR & NVR

WiFi Connection FAQs – CCTV / NVR

Simple setup guidance for modern routers

Should I buy the Version 2 or this antenna?

Buy this antenna. SWACC-USBWIFI is the USB Wi-Fi antenna wired Swann DVR and NVR recorders actually use. It is a dedicated 2.4GHz stick, so it runs seamlessly with the recorder’s network menu and the Swann app — plug in, pick your 2.4GHz Wi-Fi name, done.

2.4GHz is the more reliable band for CCTV. The wave travels further and holds a stable link through walls, floors and cupboards. That is how most systems are installed: the box in a study, wardrobe, garage or another room, not sitting on the router. 5GHz (the band Version 2 leans on) is shorter-range. It looks fine in the same room and drops off as soon as there is distance or building material in the way, which is why it is the weaker everyday choice for a recorder.

This 2.4GHz antenna is the reliable, set-and-forget part. It is the one we stock and the one that keeps a Swann recorder online.

Why can’t my CCTV device see my WiFi network?

Modern routers are designed primarily for phones, laptops and smart TVs. By default, many combine 2.4GHz and 5GHz into a single WiFi name and enable newer security modes. Everyday devices such as CCTV equipment connect most reliably when the 2.4GHz network is clearly available using standard compatibility settings.

Fast fix – what usually solves this?

Fast fix:
Create a dedicated 2.4GHz WiFi name (SSID) for your CCTV gear and set security to WPA2-PSK (AES) on that network.
This aligns modern routers with everyday devices for reliable operation, while your main WiFi can continue using newer security features.

What is an SSID?

An SSID is simply the name of your WiFi network (the name you see when connecting your phone or laptop to WiFi). Many routers use one name for both 2.4GHz and 5GHz. CCTV equipment works best when the 2.4GHz network has its own visible name.

How do I change these settings on my router?

  1. Open a web browser on your phone or computer.
  2. Type your router address into the address bar (commonly 192.168.1.1 or 192.168.0.1).
  3. Log in using the details printed on the router or modem label.
  4. Go to WiFi or Wireless Settings.
  5. Turn off “Smart WiFi”, “Band Steering” or “Combine 2.4GHz & 5GHz”.
  6. Create a clear 2.4GHz network name (example: MyHome_CCTV).
  7. Set 2.4GHz security to WPA2-PSK (AES).
  8. Set channel to 1, 6 or 11 and channel width to 20MHz.
  9. Save changes and connect your CCTV device to the new 2.4GHz WiFi name.

Will this affect my normal home WiFi?

No. This setup only creates a dedicated 2.4GHz network for everyday devices such as CCTV. Your main WiFi for phones, tablets and computers can continue using newer security and performance features.

Do I need to change router security for my whole network?

No. Only the dedicated 2.4GHz CCTV network needs WPA2 for broad compatibility. Your primary WiFi network can remain on modern security settings.

Will a WiFi extender help?

A WiFi extender can help where distance or walls reduce signal strength. Place the extender midway between your router and the CCTV device and connect your CCTV equipment to the extender’s 2.4GHz network for improved reliability.

What WiFi settings give the most reliable results for CCTV?

  • Use 2.4GHz for CCTV devices
  • Separate SSIDs for 2.4GHz and 5GHz
  • Security: WPA2-PSK (AES)
  • Channel: 1, 6 or 11
  • Channel width: 20MHz
  • Place router/extender away from metal and large electrical equipment

Tip: Modern routers prioritise phones and laptops by default. Creating a dedicated 2.4GHz network ensures everyday devices like CCTV connect cleanly and stay reliable.

Swann CCTV Security Australia

INFRONTTECH Promotional Banner INFRONTTECH Promotional Banner INFRONTTECH Promotional Banner

Need help choosing?

Tell us about your property and we'll recommend the right cameras and recorder.

07 5609 4910

Sydney 02 8814 6008
[email protected]

Mon–Fri, 9am–5pm AEST

11 suggested items

Suggested add-ons / alternatives

20 related items

More in this category

Saved to your wishlist Find it any time in your account. View list