- David Admin
- News
- 0 likes
- 17 views
A building site is at its most exposed at the start of a job. The slab is down, materials are being delivered, tools and plant are on site, and there's no mains power, no alarm and often no fence that would stop anyone determined. Temporary power poles come later, and site security systems that need power and a network connection are no use until then.
A 4G solar security camera fills that gap. It runs off its own solar panel and battery, connects over the mobile network, and can go up on day one. When the job finishes, you take it down and move it to the next site. This article covers how builders and trades can use one, and what to plan for.
Why construction sites are hard to secure
Most security cameras assume two things: a power point and an internet connection. A new build has neither for weeks or months. Sites also change constantly. Where the materials sit today is where the frame goes up next week. And the risky times, nights, weekends, long weekends and the Christmas shutdown, are exactly when nobody is around.
The TP-Link VIGI 4G solar camera kit is built for that situation. It's a VIGI C540-4G pan-tilt camera paired with a VIGI SP6020 solar system, all mounted on one pole.
What the kit does
- Sees the whole site from one spot: 4MP (2560 x 1440) resolution with a 4 mm lens, panning 348 degrees and tilting 120 degrees. You can check the materials stack, the site gate and the container from the same camera.
- Follows people and vehicles: auto tracking keeps a person or vehicle in frame as they move, and human and vehicle detection means alerts are about people and cars, not blowing plastic or shadows.
- Sees in colour at night: two white LEDs give colour night vision to 30 m. Colour footage makes it much easier to describe a vehicle or clothing to police or an insurer. Infrared to 30 m is there if you'd rather not light the site.
- Warns intruders off: a flashing light and sound warning trigger on detection, and two-way audio lets you speak to someone through the camera from your phone.
- Records on site: footage goes to a microSD card (up to 512GB), so it keeps recording even if the 4G connection drops.
- Powers itself: the 60W monocrystalline panel charges a self-heating 10.8V 20.8Ah lithium battery through an MPPT controller. That's about 4.3 days of running with no sun, and about 1.8 sunny days to recharge from empty.
- Handles weather: the camera is rated IP66.
Where builders use it
Before power is connected
This is the main reason most builders look at a solar camera. From the day the site is set out to the day the temporary power board goes in, there's nothing else that will run a camera. Putting one up at the start covers the period when materials are most exposed and the site is easiest to walk onto.
Christmas shutdown and long weekends
Sites can sit untouched for two or three weeks over Christmas, and for three or four days over a long weekend. That's plenty of time for someone to work out nobody is coming back. A camera that sends you an alert when a person or vehicle comes through the gate, and lets you open the live view and speak to them, means you don't have to drive out to check.
Containers and laydown yards
Site containers hold tools, fixings and small plant. Laydown yards hold the expensive bulk materials: timber, steel, copper, cable drums and pre-hung doors. Set an intrusion zone around the container door or the laydown area so you only get alerts when someone goes where they shouldn't.
Fit-outs before the alarm goes in
Once the building is at lock-up, appliances, tapware, lights and HVAC units start arriving, often well before the permanent alarm and cameras are commissioned. A solar camera watching the entry gives you cover during that stretch.
Moving the kit from job to job
Nothing is hard-wired. When a job is finished, unbolt the kit from the pole and take it to the next site. The bracket fits poles from 80 to 120 mm, and the complete system weighs about 13 kg, so one person can handle the parts, though it's always safer to have a second person when working at height. Because it runs on extra-low voltage, you don't need an electrician to install the kit itself.
Multi-site builders
Builders and developers running several jobs at once often buy 2 or 4 kits and rotate them between sites based on the stage each job is at. All the cameras appear in the same VIGI app on your phone or PC, so you can check every site from one place.
Deterrence and evidence
A camera that only records helps after the fact. One that reacts can stop the job before anything is loaded onto a ute. When the C540-4G detects someone, it can flash its light and sound a warning. If you get the alert while it's happening, you can open the app and speak through the camera. Hearing someone tell them they're being recorded is usually enough for most people to leave.
If something does go missing, the footage on the microSD card gives you times, faces and vehicles to hand to police and your insurer. Download the relevant clips through the app as soon as you can, and note the time of the event.
Setting it up on site
Check the 4G signal
Check reception at the pole location, not at the site office. The camera uses a Nano-SIM on Telstra, Optus or Vodafone, including the 700 MHz band. Test the network you're planning to use with your phone first.
Think about sun and shade over the whole job
Face the panel north and set the tilt anywhere from 5 to 55 degrees. The building you're putting up will start casting shade as it rises, so place the pole where the panel will still get sun when the frame and roof are up. If the site is going to be heavily shaded, look at the SP6030 version, which has a 31.2Ah battery and about 6.4 days of running without sun.
Mount it high and secure
Aim for 3 m or more. It keeps the camera out of reach and gives it a view over stacked materials and parked vehicles. Use a properly footed pole or a solid structure that won't move in the wind.
Set detection to suit the site
Use line crossing across the site gate and intrusion zones around containers and materials. Turn alerts on for after-hours only if you don't want your phone going off every time a tradie walks in during the day.
What you need
- The kit: VIGI C540-4G camera and VIGI SP6020 solar system.
- A 4G Nano-SIM with a data plan (not included).
- A microSD card up to 512GB (not included).
- A pole 80 to 120 mm in diameter (not included), properly footed and tall enough for 3 m or more of mounting height.
- The VIGI app on your phone or PC.
- A safe way to work at height for installing and moving it.
Ordering
The VIGI 4G solar site camera is available from InFront Technologies with 20% off until 31 December 2026, free delivery Australia-wide and multi-buy pricing for 2 or 4 kits, which suits builders covering more than one site. For help working out how many you need, call 1300 736 970.
Frequently asked questions
Can I move the kit between sites?
Yes. It's designed to be pole-mounted and isn't wired into anything, so you can unbolt it and take it to the next job. Swap the pole, not the kit.
What happens if the 4G connection drops overnight?
The camera keeps recording to its microSD card. You won't get live alerts while the connection is down, but the footage is still there when it comes back or when you collect the card.
Do I need a sparky to install it?
Not for the kit itself. It's extra-low voltage and runs on its own solar panel and battery, with no mains connection.
Is it weatherproof enough for a building site?
The camera is rated IP66, the battery is self-heating and charges down to -30 C, so it's built to sit outdoors through summer storms and cold winter nights.