Skip to main content
Swann DVR replacement guide

Swann DVR died? Keep your Swann cameras.

You don't need a new camera system. The IVSEC DVR8-5000 hybrid recorder replaces Swann 4, 8 and 16 channel DVRs and works with Swann SWPRO coax cameras, from old 960H models to 4K. Move each BNC lead across and the cameras keep recording.

IVSEC DVR8-5000 hybrid DVR, the replacement for Swann DVRs
The short answer

Which recorder replaces a Swann DVR?

Same cameras, same cables8 BNC inputs for AHD, TVI, CVI and CVBS cameras up to 8MP, the formats every Swann DVR camera uses
Room to growAdd ONVIF IP cameras up to 12MP through a PoE switch, up to 12 cameras in total
Phone appFree IVSEC X app for iPhone and Android, plus PC and web viewing
3-year warrantyStocked and supported in Australia, with help from our team when you swap it over
Swann DVR camera compatibility

Find your Swann DVR model

Find the series on the label under your Swann DVR (for example DVR8-4580) and check it below. Every Swann DVR series listed works with the DVR8-5000, and your cameras keep their own resolution.

Swipe the table sideways to see every column.

Camera typeSwann DVR seriesExample model numbersWorks with the DVR8-5000?
4K (8MP)5580, 5680, 5880DVR4-5580, DVR8-5580, DVR16-5580 (also G, A, RN and RU versions), DVR4-5680, DVR8-5680, DVR16-5680, SWDVR-85580H, SWDVR-165580H, SWDVR-85680HYes, at full 4K (8MP)
5MP4900, 4980DVR4-4980, DVR8-4980, DVR16-4980, SODVR-84980H, SODVR-164980HYes, at 5MP
3MP4780DVR4-4780V, DVR8-4780V, SWDVR-84780VHYes, at 3MP
1080p HD4480, 4500, 4550, 4575, 4580, 4600, 4680, 4685, 4750, 4880DVR4-4580, DVR8-4580, DVR16-4580, SWDVR-44580H, SWDVR-84580H, SWDVR-84550H, SRDVR-84575T, SWDVR-84680H, DVR8-4685, DVR8-4880Yes, at 1080p
720p HD1575, 1580, 1590, 1600, 4350, 4400, 8050, 8075DVR8-1580, SRDVR-81575H, DVR4-4350, DVR8-4350, DVR8-4400, DVR16-4400, DVR8-8075Yes, at 720p
Older analogue (960H, D1)1200 to 4200 seriesDVR4-1200, DVR8-1260, DVR8-1500, DVR8-1525, DVR8-2550, DVR8-2600, DVR8-2800, DVR8-3425, DVR8-3450, DVR4-4100, DVR8-4150, DVR16-4200Yes, at the camera’s own resolution

Don't see your model? Swann has made a lot of DVRs over the years. If your recorder has round BNC camera sockets, it almost certainly works. Email a photo of the label to [email protected] or call 1300 736 970 and we'll confirm it.

See the full list of Swann SWPRO cameras that work with it on the DVR8-5000 product page.

Before you buy

Is your Swann recorder a DVR or an NVR?

This guide is for Swann DVRs. Check the back of your recorder:

  • DVR: a row of round twist-lock BNC sockets for the cameras, and a label starting with DVR (DVR4-, DVR8- or DVR16-).
  • NVR: network sockets for the cameras, and a label starting with NVR. Swann NVR systems use IP cameras, so ask us before you buy.
  • Model codes: DVR8-4580 is an 8 channel 4580 series recorder. On the box it is often SWDVR-84580H (8 channels, 4580 series, H for hard drive fitted). SODVR and SRDVR codes are the same recorders.
BNC camera inputs on the back of the IVSEC DVR8-5000
Swapping it over

How to replace a Swann DVR

  1. Save what you need

    If the old DVR still turns on, copy any clips you want to keep to a USB stick. The new recorder can't play Swann recordings.

  2. Move the cameras

    Unplug the Swann DVR and move each camera's BNC lead to the same input on the DVR8-5000. The Swann camera power supply stays as it is.

  3. Run the wizard

    Connect the TV with HDMI or VGA and power up. Set a password and the time; the recorder detects each camera's format by itself.

  4. Connect the app

    Plug the recorder into your router, scan its QR code with the free IVSEC X app and set your alerts.

Good to know

What carries over, and what changes

Carries over

Your Swann coax cameras, their cables, the camera power supply and splitter, and usually the 3.5-inch hard drive (it is formatted, which wipes the old footage).

Changes

You use the IVSEC X app instead of the Swann app. Swann-only extras such as True Detect heat sensing, camera spotlights and sirens are run by Swann's own recorder, so expect those not to work; the DVR8-5000 uses its own motion and human and vehicle detection.

Grows with you

Some cameras dead too? Plug in the ones that still work, then add IP cameras through a PoE switch as you replace the old ones, up to 12 cameras in total.

Questions

Swann DVR replacement FAQ

Can I replace a Swann DVR with another brand and keep my Swann cameras?

Yes. Swann DVR cameras send standard HD-over-coax (AHD or TVI) or analogue (CVBS) video down a BNC cable. Any hybrid DVR that accepts those formats will show and record them. The IVSEC DVR8-5000 accepts AHD, TVI, CVI and CVBS up to 8MP, so it works with Swann SWPRO cameras from the old 960H models up to 4K.

What is the best replacement for a dead Swann DVR in Australia?

For a 4 or 8 channel Swann DVR, the IVSEC DVR8-5000 hybrid recorder. Move each BNC lead across, keep the Swann camera power supply, and the cameras keep recording. It takes up to 8 coax cameras plus IP cameras, 12 in total, has a 4K HDMI output, a free phone app and a 3-year warranty, and ships from stock in Australia.

Will my Swann 4K cameras still record in 4K?

Yes. Cameras from Swann 4K DVRs such as the DVR8-5580 and DVR8-5680 are 8MP HD-over-coax cameras, and the DVR8-5000 records coax cameras at up to 8MP.

Do I need new cables or a new power supply?

No. Swann DVR kits power their cameras from a separate 12 V power supply and splitter, not from the recorder. Leave the camera cables and the camera power supply as they are and plug each BNC lead into the new recorder.

Can I keep the recordings from my old Swann DVR?

Not on the new recorder. Swann recordings are stored in Swann’s own format, and the DVR8-5000 formats its hard drive before recording. If the old DVR still turns on, copy any clips you need to a USB stick first.

Can I reuse the hard drive from my Swann DVR?

Usually, yes. Swann DVRs use a standard 3.5-inch SATA drive, and the DVR8-5000 takes one 3.5-inch SATA drive up to 10TB. Formatting it in the new recorder wipes the old footage. A drive that has been recording for years is worth replacing, and you can order the recorder with a new 2TB drive fitted.

Will Swann True Detect heat sensing, spotlights and sirens still work?

The video will. Heat-sensing (True Detect) alerts and the camera’s spotlight or siren are controlled by Swann’s own recorder, so expect those extras not to work. The DVR8-5000 uses its own motion and human and vehicle detection instead, and sends alerts to the IVSEC X app.

I have a 16 channel Swann DVR. Will this work?

The DVR8-5000 takes 8 coax cameras plus 4 IP cameras. If you have more than 8 coax cameras, choose your 8 most important cameras or call us on 1300 736 970 and we will suggest a setup.

What app do I use after replacing the Swann DVR?

The free IVSEC X app for iPhone and Android. The Swann Security and SwannView apps only connect to Swann recorders. You can also view the cameras on a PC or in a web browser.

Does this guide cover Swann NVR systems?

No, this guide is for Swann DVRs, which use round BNC camera plugs. Swann NVRs use network cables and IP cameras. Many Swann SWNHD IP cameras work with standard ONVIF recorders but some older models do not, so call us with your model numbers before you buy.

How do I tell if my Swann recorder is a DVR or an NVR?

Look at the label and the back of the recorder. A DVR has a row of round twist-lock BNC sockets for the cameras and a label starting with DVR (for example DVR8-4580). An NVR has network sockets for the cameras and a label starting with NVR.

How do I read a Swann DVR model number?

The number after DVR is the channel count and the last four digits are the series. DVR8-4580 is an 8 channel 4580 series recorder. On the box it is often sold as SWDVR-84580H, where 8 is the channels, 4580 the series and H means a hard drive is fitted. SODVR and SRDVR codes are the same recorders.

Last updated: 6 November 2026

Saved to your wishlist Find it any time in your account. View list