
Hikvision Acusense IP LIVEGUARD 6MP With Warning & Strobe Turret Network Camera - DS-2CD2366G2-ISU/SL
6MP AcuSense. Strobe, two-way audio.
6 MP fixed turret with human/vehicle detection, IP67, PoE or 12 VDC.
- 6MP, F1.6
- AcuSense imaging, strobe + built-in mic + speaker
- IP67 housing
- AcuSense human/vehicle classification
6MP detail, day or night.
Strobe deterrent, two-way audio, AcuSense.
The Hikvision DS-2CD2366G2-ISU/SL is a 6MP fixed turret with AcuSense, built-in strobe and two-way audio. IP67 housing and single-cable PoE for professional CCTV installs.
Product shot may differ from the actual product.
This is a STANDALONE IP CAMERA — pair with a PoE NVR or PoE switch for recording.
The DS-2CD2366G2-ISU/SL operates on the LAN over a single Ethernet run. It does not include an NVR, hard drive or cloud subscription. Most professional installs record to a Hikvision PoE NVR or a third-party ONVIF-compatible VMS.
- Hikvision DS-2CD2366G2-ISU/SL camera
- Mounting template and hardware pack
- Waterproof RJ45 cable gland
- Security Torx key and quick start guide
- 802.3af/at PoE NVR or switch port
- Cat 5e or Cat 6 cable to the mount point
6MP AcuSense fixed turret.
Built for Australian residential and commercial CCTV where installers need human and vehicle classification with fewer false alarms. The DS-2CD2366G2-ISU/SL datasheet is the specification authority for this SKU.

6MP imaging for professional CCTV
The camera captures high-resolution video for evidence-grade recording.
3D DNR, BLC and HLC for mixed lighting.
Perimeter alarms, strobe deterrent and two-way audio
Motion detection, tampering alerts and configurable event linkages integrate with Hikvision NVRs and ONVIF-compatible recorders.
Built-in speaker for audible warnings, on-board microphone for two-way audio. Configure alarm actions in iVMS-4200, the web interface or Hik-Connect.


IP67 housing with PoE and edge storage
Metal except for trim ring construction, IP67 ingress protection, Ø138.3 mm × 112.1 mm (Ø5.5" × 4.4") footprint. Suitable for eaves, soffits and external walls in residential and commercial sites.
.
From PoE to recording in four steps.
01
Power over Ethernet
Run a single Cat 5e or Cat 6 cable from the camera to any 802.3af/at PoE switch or NVR port.
02
Discover and activate
iVMS-4200, SADP or the NVR auto-discovers the camera; set the admin password and assign an IP.
03
Tune smart events
Draw line-crossing, intrusion or region rules, enable target filters and event linkages.
04
Record and view
Record to NVR, NAS or microSD with ANR; view live via Hik-Connect or any ONVIF client.
Key specs — DS-2CD2366G2-ISU/SL
- Max.
- Resolution 3200 × 1800
- Min.
- Illumination Color: 0.003 Lux @ (F1.6, AGC ON),B/W: 0 Lux with IR
- Shutter
- Time 1/3 s to 1/100,000 s
- Day
- & Night IR cut filter
- Angle
- Adjustment Pan: 0° to 360°,tilt: 0° to 75°,rotate: 0° to 360°
- Day/Night
- Switch Day,Night,Auto,Schedule
- Wide
- Dynamic Range (WDR)120 dB
- Privacy
- Mask 4 programmable polygon privacy masks
- Ethernet
- Interface 1 RJ45 10 M/100 M self-adaptive Ethernet port
- On-Board
- Storage Built-in memory card slot, support microSD/microSDHC/microSDXC card, up to 512 GB
- Built-in
- Speaker Max. power concumption: 1.2 W, max. sound pressure: 10 cm: 95 dB
- Alarm
- 1 input, 1 output (max. 24 VDC/24 VAC, 500 mA)
- Reset
- Key Yes
- Basic
- Event Motion detection (support alarm triggering by specified target types (human and vehicle)),video tampering alarm,exception,alarm input and output
- Smart
- Event Line crossing detection, intrusion detection, region entrance detection, region exiting detection (support alarm triggered by specified target types (human and vehicle)),Scene change detection
- Linkage
- Upload to FTP/NAS/memory card,notify surveillance center,send email,trigger recording,trigger capture,trigger alarm output,audible warning , strobe light
Full specifications are in the attached datasheet. Hikvision may revise specifications without notice.
Dimensions & mounting

Compatible hardware & services
Hikvision PoE NVR
M-Series or Pro-series PoE NVR with integrated switch ports — the simplest supported recorder path.
Cat 5e or Cat 6 run
Standard Cat 5e or Cat 6 between the camera and PoE switch or NVR — suitable for PoE CCTV runs up to 100 m.
Surveillance microSD
Endurance-graded card up to 512 GB for edge recording and ANR if the network drops.
Hik-Connect mobile app
Free Hikvision app for live view, event push, two-way audio and remote playback.
Installation & safety notice
Low-voltage product (SELV). The DS-2CD2366G2-ISU/SL is powered from 12 VDC or IEEE 802.3af/at PoE. Concealed structured cabling must be performed by an ACMA-registered cabler.
Specifications in good faith. Verify the current datasheet for your firmware revision before ordering. Product appearance may differ from marketing images.
- Form Factor
- Fixed Turret
- Brand
- Hikvision
- Warranty
- 3 Years Australian Warranty
- Megapixels
- 6 MP
- Technology
- AcuSense









