- New
ENSA Multi-Adjustable 100W LED Flood Light (60/80/100W, 3000/4000/5000K) - LFL-M100-A
A 100W class LED floodlight you can set to 60W, 80W or 100W and warm, natural or cool white, with up to 17,000 lumens from a tough IP66 aluminium body.
- ✓Selectable 60W / 80W / 100W
- ✓Selectable 3000K / 4000K / 5000K
- ✓Up to 17,000lm at 170lm/W
- ✓Fixed lead with Australian 3-pin plug
- ✓IP66 and IK08, 320° bracket
- ✓5 year warranty
Description

Up to 17,000 lumens.
Three wattages and three colours in one fitting.
The LFL-M100-A is the smaller of ENSA's two LFL-M floodlights. Set it to 60W, 80W or 100W and warm, natural or cool white, so one fitting suits driveways, yards and building fronts.
In one sentence: the LFL-M100-A is an ENSA LED flood light with selectable 60W, 80W or 100W power and 3000K, 4000K or 5000K colour, up to 17,000 lumens at 170lm/W, an IP66 and IK08 cast aluminium body and a 5 year warranty.
Plug-in floodlight. Mounting fixings are separate.
The LFL-M100-A comes with its U-bracket fitted and a fixed power lead ending in a moulded Australian 3-pin plug, so it runs from a standard power outlet.
- LFL-M100-A floodlight with 320° rotation U-bracket
- Fixed power lead with a straight moulded Australian 3-pin plug
- A weatherproof outdoor power outlet within reach of the lead
- Screws, anchors or a pole clamp suited to your wall or pole
- A licensed electrician if you want it hard-wired or need a new outlet
Bright, efficient and built to stay outside.
At 170 lumens per watt the LFL-M100-A puts out 10,200lm at 60W, 13,600lm at 80W and 17,000lm at 100W (4000K). The LEDs are rated for 100,000 hours to L80/B50, and the cast aluminium chassis is sealed to IP66 and impact rated to IK08.

Front
A wide, rectangular spread of light.
The PC lens and tempered glass front give a 55° x 110° asymmetric beam, so the light spreads wide across a driveway or yard instead of making a round hot spot. Colour rendering is above 70 CRI.

Power
Fixed lead with an Australian 3-pin plug.
The power lead is wired into the LFL-M100-A at the factory and comes out of a sealed gland under the driver box, finishing in a straight moulded Australian 3-pin plug. It is not a removable lead, so there is no connector to keep dry. Plug it into a 240V weatherproof outdoor outlet and it is ready to go.

Rear
A heatsink sized for 100 watts.
Deep fins across the back carry heat away from the LEDs, which is what lets ENSA rate them for 100,000 hours. The chassis is cast aluminium with an outdoor powder coat and runs from -30°C to 50°C.

Bracket
Aim it exactly where you need it.
The stainless steel U-bracket rotates through 320°, so the light can be aimed down a driveway, across a yard or up a building face. The body is 274 x 336 x 55mm and weighs 3.5kg.
How it goes in
From the box to a lit yard.
01
Choose wattage and colour
Pick 60W, 80W or 100W and 3000K, 4000K or 5000K for the job before the light goes up.
02
Fix the bracket
Mount the U-bracket to the wall, eave or pole with fixings that suit the surface and a 3.5kg fitting.
03
Aim the light
Rotate the fitting on its 320° bracket so the wide 110° spread runs along the area you want lit.
04
Plug in and check
Plug the fixed lead into a weatherproof outdoor outlet, switch on at night and fine-tune the angle.
At a glance
LFL-M100-A
Show specs
Power
60W / 80W / 100W (selectable)
Light output
10,200lm (60W) / 13,600lm (80W) / 17,000lm (100W) at 4000K
Efficacy
170lm/W at 4000K
Colour temperature
3000K / 4000K / 5000K (selectable)
Colour rendering
CRI above 70
Beam angle
55° x 110°, asymmetric light distribution
Light decay
100,000 hours at L80/B50, Ta 25°C
Input voltage
100 to 240VAC
Power factor
Above 0.95
Ingress protection
IP66
Impact rating
IK08
Connection
Pre-terminated 3-pin AC plug
Lens
Tempered glass / PC lens
Construction
Cast aluminium chassis, stainless steel bracket, outdoor powder coat
Mounting
320° rotation U-bracket
Operating temperature
-30°C to 50°C
Dimensions
274 x 336 x 55mm
Weight
3.5kg
Light at 4m (100W, 4000K)
295 lx centre beam, 4.85m beam diameter
Light at 10m (100W, 4000K)
47 lx centre beam, 12.11m beam diameter
Warranty
5 years
Pair it with
What you may need with it
Power
A weatherproof outlet
The LFL-M100-A plugs in. Mount it where the lead reaches an outdoor-rated power point, or have one installed.
Mounting
Fixings for your surface
Masonry anchors, timber screws or a pole clamp rated for a 3.5kg fitting. They are not included.
Control
A timer or sensor switch
The light has no built-in motion sensor. Add a timer or sensor switch rated for the load if you want it to switch itself.
Larger sites
LFL-M200-A
The same fitting at 120W, 150W or 200W and up to 34,000lm, for car parks, loading bays and big yards.
Where it is used
Where it is used
Driveways
The 110° spread lights a long driveway or side path from one wall.
Home and shop fronts
Washes a facade and lights the approaches for security cameras.
Small car parks
Lights a row of bays from a pole or the building wall.
Workshops and yards
Even light for working outside after dark.
Sports and courts
Lights a backyard court or training area.
Farm sheds and yards
Lights machinery sheds, stock yards and work areas at night.
LFL-M100-A or LFL-M200-A?
| LFL-M100-A | LFL-M200-A | |
|---|---|---|
| Power settings | 60W / 80W / 100W | 120W / 150W / 200W |
| Light output at 4000K | 10,200 / 13,600 / 17,000lm | 20,400 / 25,500 / 34,000lm |
| Centre beam at 10m (top setting, 4000K) | 47 lx | 103 lx |
| Dimensions | 274 x 336 x 55mm | 378 x 400 x 55mm |
| Weight | 3.5kg | 5.7kg |
| Efficacy, colours, beam, IP66 / IK08, warranty | Same | Same |
Both models share the same datasheet: 170lm/W, 3000K / 4000K / 5000K, 55° x 110° beam, IP66 / IK08 and a 5 year warranty. Choose the LFL-M200-A for larger or higher-mounted areas.
Common questions
How bright is the LFL-M100-A?
Up to 17,000 lumens at 100W and 4000K. At 80W it gives 13,600lm and at 60W it gives 10,200lm.
Can I change the wattage?
Yes. It is selectable between 60W, 80W and 100W, so you can trade brightness for lower power use.
What colour temperatures does it have?
Three: 3000K warm white, 4000K natural white and 5000K cool white, all selectable on the one fitting.
Is it waterproof?
It is rated IP66, which means it is dust tight and protected against powerful water jets, so it is made for outdoor use.
How tough is the housing?
The cast aluminium chassis is impact rated to IK08, with a tempered glass front and a stainless steel bracket.
Does it plug in or need to be hard-wired?
It plugs in. The power lead is fixed to the light at the factory and ends in a moulded Australian 3-pin plug, so it is not removable. Any hard-wiring or new outlet must be done by a licensed electrician.
Does it have a motion sensor?
No. It runs whenever it has power. Use a timer or sensor switch rated for the load if you want it to switch on and off by itself.
How far does the light reach?
At 100W and 4000K the centre beam is 295 lx at 4m and 47 lx at 10m, where the beam is about 12m across.
What is the beam angle?
55° x 110° with an asymmetric distribution, which spreads the light in a wide rectangle rather than a round spot.
How long will the LEDs last?
They are rated for 100,000 hours at L80/B50, meaning at least 80% of the original output at that age, at 25°C ambient.
How big and heavy is it?
274 x 336 x 55mm and 3.5kg, so use fixings rated for that weight on the wall or pole.
What warranty does it have?
5 years. Contact Infront Technologies on 1300 736 970 for warranty service in Australia.
Need help choosing or planning an install?
Our team at Infront Technologies can help you pick the right wattage and colour for your site. Call 1300 736 970 or email [email protected].
Installation and safety
Mains power The LFL-M100-A runs on 100 to 240VAC. Plug it only into an outlet suited to outdoor use; any fixed wiring, new outlet or plug removal must be done by a licensed electrician.
Mounting At 3.5kg, mount it to a solid surface or pole with fixings rated for the weight, and keep it out of reach.
Glare Aim it down at the area you want lit, away from roads, neighbours and windows.
What it does not do It has no built-in motion sensor, daylight sensor or remote control.
Figures All figures on this page come from the ENSA LFL-M Series datasheet.
- Dimensions
- 274 x 336 x 55mm
- Ingress Protection
- IP66 / IK10
- Operating Environment
- -30° ~ 50°C
- Weight
- 3.50kg
- Power Consumption
- 60W / 80W / 100W (Selectable)
- Input Voltage
- 100 ~ 240VAC
- Beam Angle
- 55° x 110°
- Colour Rendering Index
- > 70
- Colour Temperature
- 3000K / 4000K / 5000K (Selectable)
- Dimmable
- N/A
- Housing Adjustments
- 320° Adjustable Housing
- Light Output
- 10,200lm (60W) / 13,600lm (80W) / 17,000lm (100W) at 4000K
- Luminous Efficacy
- 170lm/W at 4000K
- Motion Activated
- No
- Plug / Socket / Base
- 3-Pin AC Plug
- Rated Lifespan
- 100,000hrs (TM-21)
- Reflector / Diffuser
- Polycarbonate Lens with Tempered Glass Diffuser
- Light Decay
- 20% at 100,000 hours (L80 B50)
- Power Factor
- >0.95
- NSW ESS Accepted
- No