or 4 interest-free payments of $112.25 with
ThreeSixty FlatJET 56" dc ceiling fan with a 24W dimmable CCT LED light. Five polymer blades in the box — fit 3, 4 or 5 — on a 40W DC motor with a 6-speed remote, reverse and timer.
This is the ThreeSixty FlatJET 56" with the 24W dimmable CCT LED light. Every FlatJET ships with five aerodynamic polymer blades. Fit three for a clean modern look, or four or five for more air. 40 watts on high, 4 on low.
In one sentence: the ThreeSixty FlatJET 56" is a 142 cm (56") DC ceiling fan with 3, 4 or 5 polymer blades (5 supplied), a 6-speed remote and reverse mode, plus a 24W dimmable CCT LED light, using 40W on high.
Everything to hang it. The wiring is by your electrician.
The fan arrives ready to assemble with its remote. All five blades are in the box, so you decide on 3, 4 or 5 at installation. The 24W LED light is included.
The motor has hole patterns for 3, 4 and 5 blades, colour-coded in the manual. Three blades is the cleanest look; five moves the most air. You can change your mind later because all five blades are in the box.
Matte White
The 24W LED light is flush under the motor. Dim it and switch between warm, cool and daylight white on the remote.
Black
Black motor and blades for dark ceilings, timber-lined alfresco areas and industrial fit-outs.
Blades
Moulded polymer blades are quieter than metal, easy to clean, UV stabilised and corrosion-proof.
How it goes in
01
Screw it into a joist or batten that holds four times the fan’s weight. The terminal block is already on the bracket.
02
Fit the canopy and downrod, route the wires through, then seat the hanger ball in the bracket with the groove on the tab.
03
Active, neutral and earth to the terminal block, then plug the receiver into the fan. Isolate the power first — this is electrician’s work.
04
Choose 3, 4 or 5 blades and fit them to the matching hole pattern, fit the LED light, then test all 6 speeds and reverse on the remote.
At a glance
Show specs
Model
FlatJET 56" (FLJ56)
Blade span
142 cm (56")
Blades
5 aerodynamic polymer blades included — fit 3, 4 or 5
Motor
DC, 40W on high
Speeds
6, on the remote
Fan speed (high / mid / low)
208 / 162 / 51 RPM (3 blades)
Airflow (high / mid / low)
15,121 / 11,044 / 3,568 m³/h (3 blades)
Power use (high / mid / low)
40W / 19W / 4W
Efficiency (high / mid / low)
378 / 581 / 892 m³/h per watt (3 blades)
Light
24W LED, dimmable
Light colour
3000K / 4000K / 6500K
Light output
2,375–2,780 lm
Finishes
Black or Matte White
Remote
6 speeds, reverse, fan-off timer, natural wind mode, light on/off, dimming and colour
Reverse mode
Yes, for winter
Sloped ceilings
Up to 12° as standard
Ceiling drop
About 30 cm ceiling to bottom of motor, 29 cm ceiling to bottom of blades, on the standard downrod
Minimum height
Lowest blade edge at least 2.1 m above the floor
Location
Indoors and undercover outdoor areas (not harsh coastal sites)
Net weight
9 kg
Supply
230–240 VAC, earthed, with an all-pole isolation switch
Warranty
3-year in-home warranty from ThreeSixty
Pair it with
Height
90 cm and 180 cm downrods in matching finishes drop the fan to the right height on high or raked ceilings.
Control
ThreeSixty’s DC wall control replaces the remote receiver: 5 speeds, light on/off and dimming, with a companion handset.
Ceilings
For ceilings steeper than 12°. Ask us to quote it with the fan.
Trade
Needed for the hard-wired install and for ThreeSixty’s in-home warranty.
Where it is used
Five blades for strong airflow across big rooms.
4 watts on low with a sleep timer.
Undercover outdoor rated (not harsh coastal).
Three blades for a minimal look.
Durable polymer blades, simple remote.
Reverse on low to push warm air down.
| FlatJET 56" | Delta 56" | |
|---|---|---|
| Blades | 3, 4 or 5 (5 supplied) | 3 |
| Airflow (high) | 15,121 m³/h (3 blades) | 13,934 m³/h |
| Power (high / low) | 40W / 4W | 40W / 6W |
| Finishes | Black, Matte White | Black, Matte White, Bronze/Koa |
| Light option | 24W CCT included | Fan only on our listing |
Both are 142 cm DC fans with a 6-speed remote. Figures from ThreeSixty’s data sheets.
A 142 cm (56") fan for living rooms, open-plan areas, master bedrooms and medium alfresco spaces. With 5 blades fitted it moves the most air of the three options.
Up to 15,121 cubic metres an hour on high with 3 blades. ThreeSixty’s data sheet lists the 4 and 5 blade figures too; 5 blades moves the most air.
About 40W / 19W / 4W on high, mid and low. A DC motor uses far less power than an AC ceiling fan for the same airflow.
Yes. The 6-speed remote also does reverse, natural wind mode and a fan-off timer, plus light on/off, dimming and colour.
Yes. Reverse is on the remote. On a low speed in reverse the fan pushes warm air down from the ceiling without a draught.
Yes, undercover — ThreeSixty rates the FlatJET for indoor and undercover outdoor use. They do not recommend it for harsh coastal environments.
It handles ceiling slopes up to 12° as standard. Steeper ceilings need ThreeSixty’s sloped-ceiling accessory — ask us and we will quote it with the fan.
The lowest blade edge must be at least 2.1 m above the floor, so a standard 2.4 m ceiling is the practical minimum. Ceiling to bottom of the fan is about 30 cm. For high or raked ceilings, 90 cm and 180 cm downrods are available.
It is a 24W LED light with three colour temperatures (3000K / 4000K / 6500K) and dimming, all from the same remote as the fan.
Yes. Ceiling fans are hard-wired. A licensed electrician must install it on an earthed circuit with an all-pole isolation switch, fixed to a structure that can hold four times the fan’s weight.
ThreeSixty gives a 3-year in-home warranty when the fan is installed by a licensed electrician to the owner’s manual. Contact us first and we will organise it.
Yes. ThreeSixty’s FlatJET 56" data sheet is on the Attachments tab. Your electrician can check the hanger bracket, wiring and downrod before the day.
Not sure which size or finish suits the room? Call 1300 736 970 or send us the room size and ceiling height. Black and Matte White are both available.
Electrical. Hard-wired 230–240 VAC appliance that must be earthed. Install by a licensed electrician with an easily reached all-pole isolation switch.
Mounting. Fix to a structure that holds at least four times the fan’s weight, with the lowest blade edge at least 2.1 m above the floor. Stop the fan if it wobbles unusually and have it checked.
Figures. From ThreeSixty’s FlatJET data sheet and owner’s manual.
20 related items
