4MP cameras give the kit useful pixel density without overcomplicating storage

Each included NC000XA camera is a 4MP network model, giving a measurable jump over entry-level 2MP systems when you need better face, doorway and transaction-area detail. In practical installer terms, 4MP is often the sweet spot for compact sites: enough resolution for recognisable coverage zones while remaining easier on bandwidth and archive duration than substantially heavier multi-megapixel streams.

Because all four cameras are supplied as a matched set, image tuning, stream compatibility and recorder onboarding are simpler than assembling a mixed system. That matters on fast residential and SME jobs where consistency across four views is more important than feature sprawl. For front doors, side paths, reception counters and garage approaches, a four-camera 4MP layout is a clean, serviceable baseline.

NR004XB 4-channel PoE NVR keeps installation tidy and centralised

The bundled NR004XB recorder is a 4-channel NVR with integrated PoE, meaning the recorder can provide camera connectivity and power from the one chassis. On jobs where the camera count is fixed at four, that reduces the need for a separate PoE switch and cuts down rack, cabinet or comms-shelf clutter. It also simplifies fault finding because the camera terminations, recorder and storage are all centred in one location.

A factory-fitted 2TB surveillance drive gives the kit immediate recording capability out of the box. Record duration will depend on stream settings, frame rate, compression, motion activity and retention policy, but the included storage is appropriate for a compact four-camera deployment. The recorder also supports 4K video output, so live view and playback can be displayed crisply on modern monitors or TVs used in reception, back office or control positions.

Matched hardware reduces compatibility guesswork on fixed four-point jobs

The value in a prebuilt kit is not only the included quantity; it is the predictability. The LVK-000B is supplied with named IVSEC components rather than a generic “4-camera system”, so you know the camera model is NC000XA and the recorder is NR004XB. That makes pre-sale documentation, maintenance records and future support much easier, particularly where a service technician may revisit the site months later and need to confirm recorder or camera replacement paths quickly.

For Australian installers, this also helps when scoping cable routes, display requirements and retention expectations. Four IP cameras to a four-port PoE recorder is a simple architecture: each camera home-runs back to the NVR, storage is local in the recorder and the display endpoint can be driven from the recorder's video output. That direct topology suits smaller premises where reliability, quick handover and easy user training matter more than enterprise-scale expansion.

4K monitor or TV

Useful where the installer wants to take advantage of the recorder's 4K output support for local multiview and playback.

Cat5e or Cat6 solid-core cable

Required for each camera home run back to the PoE NVR. Solid-core cable is standard for fixed permanent structured runs.

UPS or surge protection

Recommended for the NVR location to improve recorder uptime and help protect storage integrity during mains disturbances.

Junction boxes and weatherproof terminations

Useful for cleaner camera mounting, cable concealment and moisture-managed terminations where exposed runs are unavoidable.

Does this kit include both the cameras and the recorder?

Yes. The LVK-000B includes four IVSEC NC000XA 4MP IP cameras and one IVSEC NR004XB 4-channel PoE NVR.

Is storage already fitted?

Yes. The supplied recorder is specified with 2TB surveillance storage included, so the system is intended to record locally without a separate drive purchase.

How are the cameras powered?

The kit uses a PoE NVR, so camera power and network data travel over the Ethernet cable from the recorder to each camera.

Can the recorder connect to a 4K screen?

Yes. The NR004XB is listed with 4K output support, which is useful when the local display is a UHD monitor or television.

Is this suited to a larger expandable site?

This specific package is built around a 4-channel recorder and four included cameras, so it is best suited to fixed small-site deployments. If the site is likely to exceed four cameras, a higher-channel platform should be considered during planning.

What cabling should be used for installation?

Use suitable Ethernet cabling for fixed CCTV runs, typically Cat5e or Cat6, installed to local standards and route conditions. Final cable grade should match site environment and pathway requirements.