VIP Vision VSBKTB203W-B: the black version of VIP Vision's VSBKTB203W right angle wall mount, for hanging a dome, turret or fisheye camera from a wall with the cable hidden inside.
- ✓Black powder-coated aluminium, 160 × 122 × 76 mm
- ✓1.00 kg load rating, 0.57 kg
- ✓Cable runs inside the bracket
- ✓Listed for VSIPP-8DG-ID4, -DIRMG-I3 turrets, -DIRD-I3 domes
- ✓Pole mounting with the VSBKTA152E
Description

A dome or turret on a wall.
The VSBKTB203W mount, in black.
The VIP Vision VSBKTB203W-B is the black version of VIP Vision's VSBKTB203W right angle wall mount. It stands off the wall at 90 degrees and gives a dome, turret or fisheye camera a flat plate to hang from.
In one sentence: the VIP Vision VSBKTB203W-B is a black powder-coated aluminium right angle wall mount, 160 × 122 × 76 mm and rated to 1 kg, the black version of the VSBKTB203W that VIP Vision lists for its domes, turrets and fisheye cameras.
Bracket only. Camera and wall fixings are separate.
This listing is one black VSBKTB203W-B bracket. VIP Vision publishes its figures and camera list under the white model number VSBKTB203W and does not list screws or wall plugs in the box.
- VSBKTB203W-B right angle wall mount bracket (black)
- A compatible VIP Vision camera (list below)
- Wall plugs and screws to suit the wall, 4 holes of 5 mm
- M4 screws for the camera if they are not supplied with it
- VSBKTA152E pole mount if the bracket goes on a pole
A ceiling camera, mounted on a wall, in black.
Domes, turrets and fisheye cameras are made to hang from a ceiling or eave. Where there is only a wall, the VSBKTB203W-B gives the camera a level plate standing off the wall, with the cable running up inside the bracket. The black finish suits dark walls, black cladding and black cameras.

Camera plate
Three rings of M4 holes around the cable opening.
VIP Vision's VSBKTB203W drawing shows 3 × M4 holes on each of the 84, 98 and 110 mm circles, 120 degrees apart, around a large cable opening with a side slot. Close-up from the product photo.

Drop face
The cable stays behind the face.
The curved face runs from the wall plate to the camera plate, so the cable is out of sight. The drawing shows an M6 hole underneath and a wall plate with four 5 mm holes on a 76 × 26 mm pattern. Close-up from the product photo.
How it goes in
From bare wall to mounted camera.
01
Check the camera
Confirm your camera is on VIP Vision's list for the VSBKTB203W below, or send us the model to check.
02
Fix the bracket
Mark the four 5 mm holes (76 × 26 mm pattern), drill, and fix the bracket with plugs and screws that suit the wall.
03
Bring the cable in
Feed the network or coax cable from the wall into the bracket and out through the camera plate opening, with enough slack to connect.
04
Mount the camera
Connect the camera, tuck the connectors inside, screw the camera base to the plate with M4 screws and aim it.
At a glance
VSBKTB203W-B
Show specs
Type
Right angle wall mount
Colour
Black
Material
Powder-coated aluminium
Size
160 × 122 × 76 mm
Weight
0.57 kg
Load rating
1.00 kg
Camera plate holes
3 × M4 on Ø84 mm, Ø98 mm and Ø110 mm, 120° apart (drawing)
Wall fixing holes
4 × Ø5.0 mm on a 76 × 26 mm pattern
Other
M6 hole underneath (drawing)
Pipe thread
None (N/A)
Weather resistance
Yes
Operating range
−40 °C to 60 °C, humidity 90% or less
Listed cameras
VIP Vision domes, turrets and fisheyes, see the list below
Pole option
VSBKTA152E pole mount (VIP Vision guides)
Source
VIP Vision VSBKTB203W datasheet; VIP Vision publishes no separate sheet for the black version

VIP Vision dimension drawing for the VSBKTB203W, measurements in mm and inches.
Works with
Cameras VIP Vision lists for the VSBKTB203W
VIP Vision's 2021, 2023 and 2025 Accessory Compatibility Guides and the VSBKTB203W datasheet list the white VSBKTB203W, of which this is the black version, for these cameras. Some are older models we no longer sell. Not on the list? Send us your camera model and we will confirm the fit.
Model numbers
VSIPP-6DG-ID4, VSIPP-8DG-ID4, VSIPP-8DG-ID4-B, VSIPP-8DG-ID4-P
Deterrence turrets (2025 guide)
VSIPP-8DD-ID3
Dual-lens deterrence turret (2025 guide)
VSIPP-4DIRMG-I3, VSIPP-6DIRMG-I3, VSIPP-8DIRMG-I3
Motorised turrets (2025 guide)
VSIPU-4DIRG-IM
Dual-lens turret (2025 guide)
VSIPP-4DIRD-I3, VSIPP-6DIRD-I3, VSIPP-8DIRD-I3
Fixed vandal domes (2025 guide)
VSIPFE-6IR-I, VSIPFE-5IR-I
Fisheye cameras (2025 guide)
VSIPP-4DIRD-I2, VSIPP-6DIRD-I2, VSIPP-8DIRD-I2
Fixed vandal domes (2023 guide)
VSIPP-4DIRMG-I2, VSIPP-6DIRMG-I2, VSIPP-8DIRMG-I2
Motorised turrets (2023 guide)
VSIPP-4DIRMD-I2, VSIPP-6DIRMD-I2, VSIPP-8DIRMD-I2
Motorised vandal domes (2023 guide)
VSIPP-4DIRMD, VSIPP-8DIRMD, VSIPP-4DIRMD-I, VSIPP-8DIRMD-I, VSIPC-4DIRMD
Motorised vandal domes (2021 and 2023 guides)
VSIPP-4DIRD-I, VSIPP-8DIRD-I, VSIPC-4DIRD, VSIPC-4DIRD2, VSIPC-8DIRD, VSIPW-3VDIR
Vandal domes (2021 and 2023 guides)
VSIPP-4DIRMG, VSIPP-8DIRMG, VSIPP-4DIRG-I, VSIPP-4DIRMG-I, VSIPP-8DIRMG-I, VSIPP-5DIRG-ID, VSIPU-4DIRMG-I
Turrets (2021 and 2023 guides)
VSIPP-2DG-ID, VSIPP-4DG-ID, VSIPP-8DG-ID
Deterrence turrets (2021 and 2023 guides)
VSIPPTZ-2M
PTZ mini dome (2021 guide)
VSCVI-5DIR2.8D, VSCVI-5DIRMD, VSCVI2MPVDIRMV4, VSCVI-5DIRMG, VSCVI-8DIRMG, VSCVI4MPFE
HD over coax cameras (2021 and 2023 guides)
VSIP4MPFE, VSIP3MPVDIRM2.8-12, VSIP4MPVDMINIIR, VSCVI1MPDIRV3, VSCVI2MPVDIRMV2, VSCVI2MPVDIRV2
Older models (VSBKTB203W datasheet)
Pair it with
What goes with it
Camera
VSIPP-8DG-ID4 deterrence turret
One of the current turrets VIP Vision lists for this wall mount, along with the VSIPP-6DG-ID4, VSIPP-8DG-ID4-P and VSIPP-8DD-ID3.
Vandal dome
VSIPP-8DIRD-I3
VIP Vision's 4, 6 and 8MP -DIRD-I3 fixed vandal domes are on the 2025 list for this bracket.
On a pole
VSBKTA152E dual clamp pole mount
VIP Vision's guides pair this wall mount with the VSBKTA152E when the camera goes on a pole.
Turret cameras
VSBKTB204W-B black wall mount
The other black right angle mount, listed by VIP Vision for its DIRG turrets such as the VSIPP-8DIRG-I3-B.
Where it is used
Where a black wall mount fits.
Homes with dark cladding
Black brackets on charcoal or black walls, where white hardware stands out.
Shopfronts
A dome or turret over the entry, on dark shopfitting or brickwork.
Restaurants and bars
Discreet cameras over counters and dining areas with dark finishes.
Warehouses
On walls and columns where there is no eave to hang a camera from.
Car parks and driveways
Turrets on a wall looking down the drive or across the parking area.
Hallways and stairwells
Looking along a corridor from the end wall.
VSBKTB203W-B or VSBKTB204W-B
| VSBKTB203W-B (this bracket) | VSBKTB204W-B | |
|---|---|---|
| Colour | Black | Black |
| Size | 160 × 122 × 76 mm | 160 × 122 × 76 mm |
| Weight | 0.57 kg | 0.49 kg |
| Load rating | 1.0 kg | 1.0 kg |
| Camera plate holes | 3 × M4 on Ø84, Ø98 and Ø110 mm | 4 × M4 on Ø68.5 and Ø94 mm |
| Wall fixing holes | 4 × Ø5 mm, 76 × 26 mm | 4 × Ø5 mm, 76 × 26 mm |
| Weather | Weather resistant | Not completely weather-sealed, indoor use recommended |
| Listed for | DG-ID4 and DD-ID3 turrets, -I3 motorised turrets, -DIRD-I3 domes, fisheyes | DIRG turrets |
Figures from VIP Vision's VSBKTB203W and VSBKTB204W datasheets, drawings and Accessory Compatibility Guides. The two mounts take different camera hole patterns, so pick by camera model.
Common questions
Which cameras fit the VSBKTB203W-B?
The cameras VIP Vision lists for the VSBKTB203W, including the VSIPP-8DG-ID4, VSIPP-8DD-ID3, VSIPP-8DIRMG-I3, VSIPP-8DIRD-I3 and VSIPFE-6IR-I. The full list is above; for any other camera, ask us.
Is it the same bracket as the white VSBKTB203W?
It is the black version. VIP Vision publishes the datasheet and camera list under the white model number VSBKTB203W.
Can it go outside?
Yes. VIP Vision lists the VSBKTB203W as weather resistant. Seal the cable entry at the wall.
Is a camera included?
No. This listing is the bracket only.
Are screws and wall plugs included?
VIP Vision does not list fixings in the box. Use plugs and screws that suit your wall; the wall plate has four 5 mm holes on a 76 × 26 mm pattern.
How big is it?
160 × 122 × 76 mm and 0.57 kg, according to VIP Vision.
How much weight will it hold?
1.00 kg. Check your camera's weight on its own datasheet.
Does the cable stay hidden?
Yes. The cable comes out of the wall into the bracket and up through the opening in the camera plate.
Can I mount it on a pole?
Yes, with the VSBKTA152E dual clamp pole mount, which VIP Vision's guides pair with this wall mount.
What is the difference from the VSBKTB204W-B?
Same size and wall holes, but the camera plate has different hole circles and a different camera list. The VSBKTB204W-B is for DIRG turrets; check your camera model.
What is it made of?
Powder-coated aluminium, finished in black.
What warranty does it have?
VIP Vision does not publish warranty terms for the black VSBKTB203W-B. Ask us and we will confirm before you order.
Supported by InFront Technologies.
Not sure this bracket suits your camera or wall? Call 1300 736 970 or email [email protected]. The VIP Vision VSBKTB203W datasheet is on the Attachments tab.
Installation and safety
Mechanical part only. The VSBKTB203W-B holds the camera. It carries no power or data; follow the camera's guide for its connections.
Load. Rated for 1.00 kg. Check the camera weight on its own datasheet before you mount it.
Working at height. Use a stable ladder or platform and fixings rated for the wall.
Cabling. Concealed data cabling to the camera is customer cabling under AS/CA S009 and needs an ACMA-registered cabler. A new power point needs a licensed electrician.
Figures. From VIP Vision's VSBKTB203W datasheet and drawing and the 2021, 2023 and 2025 Accessory Compatibility Guides. VIP Vision publishes no separate datasheet for the black version.
- Dimensions
- 160 x 122 x 76mm
- Operating Conditions
- -40° ~ 60°C / 90% RH (max)
- Weight
- 0.57kg
- Weather Resistance
- Yes
- Materials
- Aluminium
- Bracket Type
- Right Angle
- Load Bearing Capacity
- 1.00kg
- Pipe Thread
- N/A






















































