- New
Akuvox A095S Light Grey Lockable Metal Box for A095S Access Controllers — AK-A095S-BOX
Akuvox A095S metal box houses the A095S access controller on the wall behind a lockable hinged door. The controller clips onto the rail inside, and the box comes with a wall-mounting template plus the three screws and anchors that hold it to the wall.
- ✓Lockable metal enclosure for the Akuvox A095S controller
- ✓Rail inside for the controller, hinged door with key lock
- ✓Wall-mounting template, 3 × ST4×20 screws and 3 anchors included
- ✓Light grey finish with the Akuvox logo on the door
Lock the controller away.
A metal home for the A095S.
The AK-A095S-BOX is the Akuvox metal enclosure for the A095S access controller. It fixes to the wall with three screws, the controller sits on the rail inside, and a keyed door closes over the wiring.
Enclosure only.
You get the metal box, its wall-mounting template and fixings. The A095S controller, readers, locks and power supply are separate items.
- Metal box
- Wall-mounting template
- 3 × ST4×20 crosshead screws
- 3 × plastic wall anchors
- Akuvox A095S access controller
- A solid wall surface
- Electric drill with a 6 mm bit
Wiring out of reach.
Door controllers carry the lock, reader and exit-button wiring for every door. Behind a locked metal door, those terminals are out of reach of anyone without the key.

Inside
Rail-mounted controller.
The A095S mounts on the rail inside the box, with room around it for the door, reader and lock wiring.
The hinged door closes over everything and locks with a key on the side of the box.
Fixing
Three screws to the wall.
The back of the box has three fixing points that match the supplied wall-mounting template.
Drill 6 mm holes 25 mm deep, fit the anchors flush with the wall and screw the box on with the three ST4×20 screws.

How it works
Up on the wall in three steps.
01
Mark and drill
Stick the template on the wall and drill the marked holes 6 mm wide and 25 mm deep.
02
Fix the box
Push in the three plastic wall anchors so they don't stand proud, then screw the box on with three ST4×20 screws, firm and flush against the wall.
03
Fit and lock
Mount the A095S on the rail inside, wire it up, check it works, then lock the outer cover.
At a glance
Key specs — AK-A095S-BOX
Show all specifications
- Type
- Wall-mounted metal enclosure
- Colour
- Light grey
- Compatible with
- Akuvox A095S access controller
- Controller mounting
- Rail inside the box
- Security
- Hinged door with key lock
- Box fixing
- 3 × ST4×20 screws and wall anchors
- Warranty
- Australian warranty
- Brand
- Akuvox
- Reference
- AK-A095S-BOX
Enclosure
- Material
- Metal
- Colour
- Light grey
- Door
- Hinged, with key lock
- Controller mounting
- Rail inside the box
Installation
- Mounting
- Wall
- Fixing holes
- 3, drilled 6 mm wide and 25 mm deep
- Box fixing
- 3 × ST4×20 screws and wall anchors
- Template
- Wall-mounting template included
- Compatible controller
- Akuvox A095S
In the box
- Metal box
- 1
- Wall-mounting template
- 1
- ST4×20 crosshead screws
- 3
- Plastic wall anchors
- 3
Pair it with
Goes with the A095S controller
Controller
Akuvox A095S
The 4-door, 8-reader IP access controller this box is made to hold.
Readers
Akuvox A01S, A02S, A03S and A08S
Readers that can be wired back to the A095S at each door.
Downloads
Datasheets and guides
Compliance certificates and technical documents are available on request for tenders and installers — send an enquiry.
Answers
Common questions
Which controller does it fit?
The Akuvox A095S access controller, which mounts on the rail inside the box.
Does it lock?
Yes. The outer cover is a hinged door with a key lock on the side of the box.
How is it fixed to the wall?
Stick the supplied template on the wall, drill three holes 6 mm wide and 25 mm deep, insert the plastic wall anchors and screw the box on with the three ST4×20 screws.
What is in the box?
The metal box, a wall-mounting template, three ST4×20 crosshead screws and three plastic wall anchors.
Is the controller included?
No. The A095S controller is a separate item.
What colour is it?
Light grey, with the Akuvox logo on the door.
The tidy way to mount an A095S.
Put the controller in its own lockable box rather than loose in a ceiling space or comms cupboard, with the wiring for every door in one place.
- Material
- Metal
- Colour
- Light grey
- Brand
- Akuvox
- Product Type
- Controller enclosure
- Model
- A095S metal box
- Includes
- Metal box, wall-mounting template, 3 ST4×20 screws, 3 wall anchors
- Compatible with
- Akuvox A095S access controller
- Lock
- Key lock on the hinged door