The IF-102PU12/48-2SFP is a compact industrial dual-SFP PoE+ switch built for Australia’s harshest edge-network environments. Two 100/1000 Base-X SFP slots push gigabit data up to 20 km over single- or multi-mode fibre, while two IEEE 802.3at PoE+ ports deliver a full 30 W each for PTZ cameras, Wi-Fi 6/6E access points, ALPR units and more—all from a fan-less IP30 aluminium chassis that thrives in -40 °C to +75 °C.

Why Dual SFP + Dual PoE + Matters

• Future-proof fibre backbone: hot-swap SFP transceivers to suit single-mode, multi-mode or BiDi links up to 20 km—immune to lightning and EMI.
• Power where you need it: two RJ45 ports supply 30 W each, eliminating standalone injectors and AC outlets at the pole, mast or roadside cabinet.
• 12–48 V DC input with boost: run off vehicle, solar or UPS batteries; the integrated converter delivers a regulated 48 V PoE rail.
• One box, half the clutter: replace two media converters + two PoE injectors with a single DIN-rail switch—less cabling, less heat, fewer call-outs.

Real-World Applications

1. Campus-wide 4K CCTV: fibre backhaul to the security control room; PoE+ powers PTZ cameras on every light pole—zero external injectors.
2. Solar-powered remote gates: 24 V battery in, 48 V PoE out for an outdoor bullet camera and LoRaWAN gateway.
3. Smart-city bus shelters: single-mode fibre daisy-chains shelters in a ring; PoE+ feeds a Wi-Fi 6 AP and vandal-deterrence camera.
4. Factory-floor machine vision: SFP modules carry uncompressed video through EMI; PoE+ powers high-speed inspection cameras.
5. Transport ITS roadside cabinets: fibre uplinks span kilometres; PoE+ drives radar speed cameras, ALPR and weather sensors from a –40 °C to +75 °C switch.

Key Benefits at a Glance

• Extend fibre networks with dual SFP slots (100/1000 Base-X).
• 60 W PoE budget (30 W × 2) for PTZs, Wi-Fi 6, digital signage, VoIP, kiosks.
• Wide DC range: accepts 12 V, 24 V or 48 V, outputs regulated 48 V PoE.
• Fan-less IP30 aluminium shell—silent, dust-proof, vibration-resistant.
• Plug-and-play: auto-MDI/MDI-X, jumbo-frame support, link-fault pass-through.

Technical Specifications

Frequently Asked Questions

Can I create a fibre ring?
Yes—use one SFP for upstream and the other for downstream; the switch supports RSTP for sub-second fail-over.

Do the SFP slots work at 100 Mbps?
Absolutely. They are dual-rate 100/1000 Base-X for legacy fibre runs.

What if my site only has 24 V batteries?
The integrated booster steps 12–48 V up to 48 V PoE—no external converter required.

What’s in the Box?

• 1 × IF-102PU12/48-2SFP switch (DIN-rail clip pre-fitted)
• Wall-mount brackets & screws
• 4-pin DC terminal-block plug
• Quick-start guide