Securview 28W 50M 120° Night Vision Infrared Illuminator Night Vision Extender - 2.5AMP
Securview VSIR28W120D: a 28 W infrared illuminator that adds up to 50 m of IR in a 120° beam for day/night CCTV cameras, in an IP66 die-cast housing.
- ✓28 W, 12 high-power IR LEDs
- ✓IR to 50 m, 120° wide beam
- ✓Switches on automatically at night
- ✓IP66 die-cast aluminium, tempered glass front
- ✓12 VDC, about 2.3 A; supply sold separately
Description

50 m of infrared, 120° wide.
Light the whole yard for your cameras.
The Securview VSIR28W120D is a 28 W infrared floodlight for CCTV: 12 high-power IR LEDs, a 120° beam that reaches 50 m, automatic day and night switching and an IP66 die-cast housing.
In one sentence: the Securview VSIR28W120D is a 28 W, 12 VDC infrared illuminator with 12 high-power IR LEDs, a 50 m IR distance and a 120° beam, in an IP66 die-cast aluminium housing with a tempered glass front and tilt bracket.
Illuminator only. Camera and 12 V power supply are separate.
This listing is one 28 W IR illuminator. It needs a 12 VDC supply and a camera that uses infrared at night.
- VSIR28W120D IR illuminator on its tilt bracket (as pictured)
- A 12 VDC power supply rated 3 A or more
- Low-voltage power cable from the supply to the illuminator
- A day/night camera that uses infrared at night
- Fixings to suit the wall, eave or post
When the camera's own IR runs out.
A camera's built-in IR is a handful of small LEDs. The VSIR28W120D adds 12 high-power IR LEDs and floods the scene with infrared the camera can use, so night pictures stay brighter and clearer further out, up to 50 m across a 120° wide beam. It switches itself on after dark.

Tilt bracket
Aim it, then lock it.
The U-bracket pivots on one bolt so the beam can be tilted onto the area the camera watches. Securview's drawing shows the bracket base with a centre 8 mm hole and two 24 mm slots, 54 mm either side, for fixing.

Housing
IP66, die-cast aluminium and tempered glass.
A die-cast aluminium body with cooling fins behind a tempered glass front. Rated IP66 for indoor or outdoor use, from −30 °C to 50 °C. 221 × 90 × 232 mm and 1.7 kg.
How it goes in
From bracket to brighter nights.
01
Pick the spot
Mount it near the camera, beside or a little away from the lens rather than in front of it, with a clear view of the area. The beam reaches 50 m across 120°.
02
Fix the bracket
Screw the tilt bracket to the wall, eave or post through its centre hole and slots, with fixings to suit the surface.
03
Run 12 V power
Use a 12 VDC supply rated 3 A or more. It draws 28 W (about 2.3 A), so keep the low-voltage run short and use heavy enough cable.
04
Aim and test after dark
Loosen the pivot bolt, tilt the beam onto the scene, then check the camera picture at night and tighten the bolt.
At a glance
VSIR28W120D
Show specs
IR distance
50 m
Beam angle
120°
LEDs
12 high-power IR LEDs
Day / night
Automatic switching
Power input
12 VDC
Power consumption
28 W (about 2.3 A at 12 V)
Power connection
2.1 mm DC (confirm the lead with us)
Housing
Die-cast aluminium, tempered glass front
Protection
IP66, indoor or outdoor
Dimensions (W × D × H)
221 × 90 × 232 mm
Weight
1.7 kg
Operating temperature
−30 °C to 50 °C
Mounting
Tilt bracket: centre 8 mm hole, two 24 mm slots 54 mm either side
IR wavelength
Not stated on the datasheet, confirm with us
Listed camera ranges
VIP Vision, Securview, Securview Victory Series, Watchguard

Dimensions in mm, from Securview's VSIR28W120D datasheet.
Pair it with
What goes with it
Power
A 12 V 5 A supply (SR-PSU-12V5A or PS5000SM)
28 W at 12 V is about 2.3 A, so a 12 V 5 A supply runs it with room to spare. Sold separately.
Camera
A day/night IR camera
Securview lists the VIP Vision, Securview, Securview Victory Series and Watchguard camera ranges. Other cameras that switch to black-and-white IR night mode can use it too; tell us the model.
Other beam
VSIR28W30D: 170 m, 30°
The 28 W model with a narrow 30° beam, for long, narrow areas. Many sites use one of each.
Where it is used
Where a wide 120° beam works.
Back yards and decks
Fill a square yard or entertaining area that a single camera watches.
Wide driveways
Light the full width of the driveway and the front of the house.
Courtyards and side passages
Even infrared over a close, wide space with no dark corners.
Loading docks
Cover the dock apron and doors in front of the camera.
Sheds and warehouses
Indoor or outdoor, so it can light a large shed or storage area.
Shop fronts
Light the footpath and entry in front of a shop after hours.
VSIR28W120D or VSIR28W30D
| VSIR28W120D (this one) | VSIR28W30D | |
|---|---|---|
| IR distance | 50 m | 170 m |
| Beam angle | 120° | 30° |
| LEDs | 12 high-power IR | 12 high-power IR |
| Power | 12 VDC, 28 W | 12 VDC, 28 W |
| Size (W × D × H) | 221 × 90 × 232 mm | 221 × 90 × 232 mm |
| Weight | 1.7 kg | 1.7 kg |
| Protection | IP66 | IP66 |
| Best for | Wide, close areas | Long, narrow areas |
Figures from Securview's VSIR28W120D and VSIR28W30D datasheets.
Common questions
How far does it reach?
Up to 50 m, in a 120° beam. That is Securview's IR distance; what your camera shows at that range also depends on its lens and sensor.
Will it work with my camera?
It works with day/night cameras that switch to black-and-white night mode and use infrared. Securview lists the VIP Vision, Securview, Securview Victory Series and Watchguard ranges. The IR wavelength is not on the datasheet, so tell us your camera model and we will confirm.
What power supply does it need?
A 12 VDC supply rated 3 A or more. It uses 28 W, which is about 2.3 A at 12 V.
Is a power supply included?
No. The supply and the cable to it are sold separately.
Does it turn on by itself at night?
Yes. Day and night switching is automatic, so it comes on after dark and goes off in daylight while power stays connected.
Can it be mounted outside?
Yes. It is rated IP66, with a die-cast aluminium body and a tempered glass front, and works from −30 °C to 50 °C.
Will people see the light?
Infrared is largely invisible to the eye, so the area does not look lit. Depending on the wavelength, the LEDs can show a faint red glow up close; confirm with us if that matters.
Should I choose 120° or another beam?
Choose a 120° beam for wide, close areas. For longer reach, the 30° and 60° models put the same kind of light into a narrower beam.
Where should it go relative to the camera?
Beside the camera or a little away from it, aimed at the same area. Keeping it off the lens axis cuts glare from rain and insects close to the camera.
How far can the supply be from the illuminator?
As close as practical. At about 2.3 A a long, thin 12 V cable loses voltage and the light gets weaker. Use heavier cable on longer runs, or call us to work it out.
Does it give colour pictures at night?
No. Infrared gives a black-and-white night picture. For colour at night a camera needs visible light.
Who can install it?
It runs on 12 VDC from a plug-in supply, so a handy person can fit it. A new power point for the supply needs a licensed electrician.
Supported by InFront Technologies.
Help choosing the beam, power supply or camera: call 1300 736 970 or email [email protected]. The datasheet is on the Attachments tab.
Installation and safety
Low voltage. Runs on 12 VDC, 28 W. The supply plugs into a power point; a new power point needs a licensed electrician.
Outdoor connections. The housing is IP66. Keep the DC joint and the supply out of the weather, for example in a weatherproof box.
Working at height. It weighs 1.7 kg and usually goes on a wall or eave. Use safe access equipment.
What it does not do. It is not a camera and does not record. It gives no visible light and no colour picture at night.
Figures. From Securview's VSIR28W120D datasheet. Current draw is worked out from the 28 W rating at 12 V.
- Power input
- 12VDC
- Ingress Protection
- IP66
- Operating Environment
- -30° ~ 50°C
- Weight
- 1.7kg
- Power Consumption
- 28W
- Beam Angle
- 120°
- Dimensions (WxDxH)
- 221x90x232mm
- Wavelength
- 850nm
- Day / Night
- Auto switch
- IR Distance
- 50m
- LED Type
- 12pc high power IR LED
Swann NHD-875WLB 4K Add-On / Replacement Bullet Camera with Spotlight & Night2Day -...
Sale ends Fri 20 Nov