PS9VDC1A 9V DC 1A plug-pack with Australian pins and 1.5 m DC lead

PS9VDC1A coiled 1.5 m DC lead and barrel DC plug

PS9VDC1A plug-pack face with Australian pins, RCM rating label and DC lead

1 / 4

Securview 9V DC 1.0A Power Supply - PS9VDC1A

Name: Securview 9V DC 1.0A Power Supply - PS9VDC1A
Brand: Securview
SKU: PS9VDC1A
Price: 25 AUD
Availability: InStock

SKU PS9VDC1A In Stock - Ready to Ship

$25.00 inc GST

Securview PS9VDC1A: a 9V DC, 1A plug-pack with Australian pins and a 1.5 m lead ending in a DC plug, for 9V devices that draw 1A or less.

✓9V DC, 1.0A output
✓110–240V AC input, Australian pins
✓1.5 m DC lead
✓RCM mark on the label pictured
✓Plug size and polarity: confirm with us
✓12 month warranty

PS9VDC1A 9V DC 1A plug-pack power supply with Australian pins, coiled 1.5 m lead and DC plug

Securview · 9V DC · 1A plug-pack

A plain 9V supply.
9V DC. 1A. 1.5 m lead.

The PS9VDC1A is a 9V DC, 1A plug-pack: Australian pins on the case, 110 to 240V AC in, and a 1.5 m lead ending in a DC plug. It suits 9V devices that draw 1A or less.

In one sentence: the PS9VDC1A is a Securview 9V DC, 1.0A plug-pack power supply with Australian pins, a 110 to 240V AC input and a 1.5 m lead ending in a DC plug, for 9V devices drawing 1A or less.

Check the plug and polarity before you buy.

The maker does not publish the DC plug size or the polarity. Before you order, compare the plug with your device's socket and old adaptor, and check the polarity symbol, or ask us to check them. Many 9V effects pedals are centre negative, while a lot of network gear is centre positive: the wrong polarity can damage equipment.

In the box

PS9VDC1A 9V 1A plug-pack with 1.5 m DC lead

You also need

A device that takes 9V DC, 1A or less, on a matching plug
A power point

Match three things and it works.

A replacement adaptor has to match the voltage (9V DC), the polarity and the plug, and give at least the current the device draws. This one supplies up to 1A (1000 mA), so it suits devices whose label or old adaptor says 9V and 1A or less.

Plug-pack

Plugs straight into the wall.

The Australian pins are part of the case, so there is no separate mains cord. The rating label on the unit in our photo carries the RCM mark.

PS9VDC1A coiled 1.5 m DC lead ending in a barrel-type DC plug

The DC plug

DC plug on a 1.5 m lead.

The lead runs 1.5 m and ends in a barrel-type DC plug. The maker does not publish its size, so check it against your device or ask us before you buy.

How it goes in

Check, plug in, done.

Read the old label

Your device or its old adaptor must say 9V DC, and 1A (1000 mA) or less.

Check plug and polarity

Compare the plug with your device's socket and check its polarity symbol. Ask us to confirm before connecting.

Connect the device

Push the DC plug fully into the device's power socket.

Plug in and check

Plug the supply into a power point, switch on and check the device powers up normally.

At a glance

PS9VDC1A

Show specs

Output

9V DC, 1.0A (9W)

Input

110–240V AC, 50/60Hz

Type

Plug-pack, Australian pins on the case

DC lead

1.5 m

DC plug

Barrel-type DC plug; size not published, confirm with us

Polarity

Not published: confirm with us before connecting

Listed size

55 × 21 × 100 mm

Weight

0.08 kg

Colour

Black

Approval mark

RCM mark on the rating label of the unit in our photos

Suits

Devices that take 9V DC, 1A or less, on a matching plug and polarity

Not for

12V CCTV cameras, anything drawing over 1A, 9V AC equipment

Warranty

12 months

Pair it with

Sibling

Need 5V instead?

The PS5VDC1A is the 5V DC, 1A version of this plug-pack, with the same 1.5 m lead.

12V gear

12V 1A or 2A plug-packs

Most CCTV cameras run on 12V DC. Our 12V 1A and 2A plug-packs have a 2.1 mm centre positive plug.

Not sure?

Send us the label

Email a photo of your device's power label and old adaptor to [email protected] and we will confirm the match before you buy.

Where it is used

Small network gear

Desktop switches, modems and similar devices whose adaptor reads 9V DC, 1A or less.

Replacing a lost adaptor

A spare for 9V equipment whose original adaptor has failed or gone missing.

Music and audio gear

Keyboards and audio gear rated 9V DC. Most effects pedals are centre negative, so confirm the polarity with us first.

Hobby and test bench

A simple 9V source for small electronics projects that need up to 1A.

Installer spares

A 9V plug-pack in the van for the odd device that is not 12V.

Other 9V gear

Any equipment that takes 9V DC on a matching plug and polarity and draws 1A or less.

PS9VDC1A or PS5VDC1A

	PS9VDC1A (this supply)	PS5VDC1A
Output	9V DC, 1.0A	5V DC, 1.0A
Power	9W	5W
Input	110–240V AC, 50/60Hz	110–240V AC, 50/60Hz
Form	Plug-pack, Australian pins	Plug-pack, Australian pins
DC lead	1.5 m	1.5 m
Listed size and weight	55 × 21 × 100 mm, 0.08 kg	55 × 21 × 100 mm, 0.08 kg

Same lead length and size; only the voltage differs. Use the one your device's label asks for: never a higher voltage.

Common questions

What does it output?

9V DC at up to 1.0A (1000 mA), which is 9W.

What size is the DC plug?

Confirm with us. The maker does not publish the plug size. Send us your device model or a photo of the socket and we will check it before you buy.

Is it centre positive or centre negative?

Confirm with us before connecting. The maker does not publish the polarity, and the symbol is not readable in our photos.

Will it power a guitar effects pedal?

Only if the pedal takes 9V DC with the same polarity and plug. Most pedals are centre negative, so confirm the polarity with us first.

Will it run a 12V CCTV camera?

No. Standard CCTV cameras need 12V DC. Use one of our 12V plug-packs instead.

My device needs 9V 0.6A. Can I use this 1A supply?

Yes, if the voltage, polarity and plug match. A device only draws the current it needs, so a higher current rating is fine.

My device needs 9V 2A. Will this work?

No. It can only supply 1A, so the device may not start or may reset under load. Ask us for a higher-current supply.

What input voltage does it take?

110 to 240V AC, 50/60Hz, so it runs from a standard Australian power point.

How long is the lead?

1.5 m from the plug-pack to the DC plug.

Is it approved for use in Australia?

The rating label on the unit in our photos carries the RCM mark. Ask us if you need the approval number for a job.

What warranty does it have?

12 months, supported by InFront Technologies here in Australia.

Can I use it outdoors?

No. Plug it into an indoor power point and keep it dry.

Supported by InFront Technologies.

Not sure it suits your device? Call 1300 736 970 or email a photo of the device's power label to [email protected] and we will check the voltage, plug and polarity before you buy.

Installation and safety

Mains powered. The plug-pack goes into a standard power point. Do not open the case or use it if the case or lead is damaged.

Match the voltage, polarity and plug. Only connect it to equipment that takes 9V DC with the same polarity and plug. The wrong voltage or polarity can damage equipment.

Do not overload it. The device must draw 1A or less.

Indoor use. Keep it dry and give it room to shed heat.

What it does not do. It is not a battery charger, a USB charger or a 12V supply, and it does not output AC.

Figures. From the maker's product details for this model and the rating label in our product photos. No manufacturer datasheet is published for it.

Dimensions: 55 x 21 x 100mm
Weight: 0.08kg
Colour: Black
Input Voltage: 110-240 VAC // 50/60Hz
Output Voltage: 9VDC 1.0A
Outgoing line length: 1.5m