• VSBKTB211W wall mount bracket

• A large dome camera (confirm the model with us)
• Wall fixings rated for the surface and the camera's weight
• Cable to the camera

01

Confirm the camera

Send us your dome's model so we can confirm it fits the bracket's hole circles and is within the 3 kg load rating.

02

Fix the bracket

Mark the holes from the wall plate, drill and fix the bracket level with fixings rated for the wall.

03

Run the cable

Feed the camera cable through the bracket and out at the camera plate.

04

Mount the camera

Make the connections, screw the dome base to the plate with M4 screws and aim the camera.

Camera

Your large dome

Send us the model and we will check the hole pattern and weight before you order.

Smaller cameras

VSBKTB2203W wall bracket

The smaller VIP Vision right angle bracket, listed in the 2025 guide for its turrets and motorised domes.

Black

VSBKTB203W-B wall bracket

A black right angle wall bracket for smaller VIP Vision cameras.

Cabling

Cat6 cable

Outdoor-rated network cable for the run back to the recorder or switch.

Warehouses

Large domes on walls overlooking loading bays and racking.

Car parks

Watching driveways and parking rows from a building wall.

Shopfronts

A large dome over the entry, held clear of the wall.

Schools

Playgrounds and walkways from a classroom block wall.

Factories

Yards and gates from the side of the building.

Apartment blocks

Entries and driveways from the building wall.

Which cameras fit the VSBKTB211W?

VIP Vision describes it as suitable for its large domes but doesn't list camera models. Send us your camera model and we will confirm the fit.

How much weight will it hold?

3.00 kg, according to VIP Vision. The bracket itself weighs 0.97 kg.

How big is it?

235.4 × 180.3 × 84.2 mm, with a Ø180.3 mm camera plate.

What is it made of?

Aluminium alloy, finished in white.

Is it weatherproof?

VIP Vision lists its weather resistance as N/A. Use a camera rated for outdoor use and seal the cable entry if it goes outside.

Is a camera included?

No. This listing is the bracket only.

Will it fit a standard dome or turret?

Its holes are on Ø84, Ø140 and Ø142 mm circles. For VIP Vision turrets and smaller domes, the VSBKTB2203W is the bracket VIP Vision lists in its 2025 guide.

What screws hold the camera?

M4 screws into the plate, per VIP Vision's drawing.

Does the cable run inside the bracket?

The wall plate has a Ø30 mm cable opening, so the cable can come out of the wall behind the bracket.

What temperatures does it handle?

−40 °C to 60 °C at up to 90% humidity, according to VIP Vision.

Does it come with fixings?

Use wall fixings rated for your surface and the combined weight of the bracket and camera.

What warranty does it have?

VIP Vision does not publish warranty terms for this bracket. Ask us before you order and we will confirm the cover.