- On sale!
- -$ 80.00
IVSEC DVR8-5000 Swann DVR Replacement - 12-Channel Hybrid Recorder, Works with All Swann SWPRO Cameras - 4580/4980/5580/5680
Fri 20 Nov Friday 20 November Ends in
IVSEC DVR8-5000: the replacement for Swann SWDVR-4480 to 5680 DVRs. Works with all Swann SWPRO cameras, and adds IP cameras for up to 12 in total.
- ✓Replaces Swann SWDVR-4480, 4580, 4680, 4685, 4880, 5580, 5680
- ✓Works with all Swann SWPRO cameras
- ✓8 BNC inputs: AHD, CVI, TVI, CVBS up to 8MP
- ✓Add ONVIF IP cameras up to 12MP, 12 cameras in total
- ✓1 SATA bay up to 10TB, 4K HDMI output
- ✓Free IVSEC X app, 3-year warranty
Description

Replaces your Swann DVR. Works with all Swann SWPRO cameras.
Hybrid recorder for up to 12 cameras.
The IVSEC DVR8-5000 replaces Swann SWDVR-4480, 4580, 4680, 4685, 4880, 5580 and 5680 DVRs and works with all Swann SWPRO analogue cameras: move the BNC leads across and keep recording. Add IP cameras over the network, up to 12 cameras in total.
In one sentence: the IVSEC DVR8-5000 is a Swann DVR replacement that works with all Swann SWPRO cameras: a hybrid recorder with eight BNC inputs for AHD, CVI, TVI and CVBS cameras up to 8MP, plus ONVIF IP cameras up to 12MP, up to 12 cameras in total.
IP cameras need a PoE switch.
The recorder has eight BNC inputs for coax cameras and one network port. It has no PoE ports, so IP cameras are powered by a PoE switch on the same network. Choose the drive size above; the 2TB option comes fitted.
- IVSEC DVR8-5000 hybrid recorder
- Hard drive fitted, if you choose a drive option
- 12 V 2 A power supply
- USB mouse
- Hard drive screws
- Printed quick installation guide
- A TV or monitor with HDMI or VGA
- A network cable to your router, for the IVSEC X app
- A PoE switch and Cat5e or Cat6 cable for any IP cameras
Upgrade at your own pace.
Plug in the coax cameras that still work, then add IP cameras through a PoE switch. As each old camera fails, replace it with an IP camera and keep the same recorder, the same app and your recorded footage.

The connections
Eight BNC inputs, plus the network.
Eight BNC video inputs for coax cameras, eight audio inputs, HDMI and VGA outputs, a CVBS output, audio out, a gigabit network port, USB and an alarm terminal block.

Coax cameras
Your existing cabling still works.
The BNC inputs take AHD, CVI, TVI and CVBS cameras up to 8MP, including Swann SWPRO analogue cameras. Plug the old leads straight in.

The recorder
One drive bay, up to 10TB.
A single 3.5" SATA bay takes up to 10TB. Video is compressed with H.265+ to make the drive last longer, and the 4K HDMI output shows up to nine cameras on one screen.
How it goes in
From the old DVR to the new one.
01
Swap the recorder
Unplug the old DVR and move each camera's BNC lead to the same input on the DVR8-5000. Connect the TV with HDMI or VGA and plug in the power supply.
02
Run the wizard
Set the password, date and time in the startup wizard. The coax cameras appear on screen, and the recorder detects AHD, CVI, TVI or CVBS by itself.
03
Add IP cameras
Connect a PoE switch to your network and plug the IP cameras into it. The recorder searches the network and adds ONVIF cameras to free channels.
04
Connect the app
Plug the recorder into your router, scan its QR code with the free IVSEC X app and set your motion and smart detection alerts.
At a glance
IVDVR8-5000
Show specs
Model
IVSEC DVR8-5000 hybrid DVR / IP recorder
Channels
Up to 12 cameras: up to 8 analogue plus IP, in any mix
Analogue inputs
8 × BNC, AHD, CVI, TVI and CVBS, up to 8MP
IP cameras
ONVIF Profile S, G, T, up to 12MP, through the network port
PoE ports
None; IP cameras need a PoE switch
Compression
H.265+, H.265, H.264+, H.264, MJPEG
Video output
HDMI up to 4K, VGA, CVBS
Display
1, 4, 6, 8 or 9 cameras on screen
Audio
8 audio inputs, 1 output, two-way audio
Storage
1 × 3.5" SATA bay, up to 10TB
Smart detection
Human and vehicle, face, line crossing, perimeter intrusion and more, depending on the camera
Network
1 × gigabit RJ45
USB
2 × USB 2.0, for the mouse and backups
Software
IVSEC X app (iOS and Android), PC client, web browser
Power
12 V DC, 2 A; 11 W without a drive
Size and weight
53 × 300 × 220 mm, 1.7 kg
Operating temperature
-10 °C to 50 °C
Warranty
3 years
Pair it with
Good to add
Power
A PoE switch
Powers and connects IP cameras on one cable each. We stock PoE switches from 4 to 48 ports.
Cameras
IVSEC IP cameras
Add IVSEC IP cameras as the old coax cameras fail. They work plug and play with smart detection.
Security
A lockable cabinet
Keep the recorder out of reach so a thief can't take the footage. Ask us about the 24SECCAB security cabinet.
Power
A UPS
Keeps the recorder running through short power cuts and protects the drive from sudden shutdowns.
Where it is used
Where the DVR8-5000 fits.
Replacing a Swann DVR
A failed SWDVR-4480, 4580, 4680, 4685, 4880, 5580 or 5680, keeping every SWPRO camera.
Homes with coax cabling
Keep the cameras that still work and add IP cameras where you need more detail.
Shops and offices
Mix the existing analogue cameras with new IP cameras on one recorder and one app.
Farms and sheds
Long coax runs to outbuildings keep working, with IP cameras added near the house.
Staged upgrades
Spread the cost of moving to IP over months or years, one camera at a time.
Mixed brands
ONVIF IP cameras from IVSEC, Dahua, Hikvision, Uniview and other brands on one system.
DVR8-5000 or NVR 8000
| IVSEC DVR8-5000 (this recorder) | IVSEC NVR 8000 | |
|---|---|---|
| Coax (BNC) cameras | Up to 8 | No |
| IP cameras | Yes, through a PoE switch | Up to 8, on built-in PoE+ ports |
| Total cameras | Up to 12 | Up to 8 |
| Storage | 1 bay, up to 10TB | 1 bay, up to 16TB |
| Best for | Keeping existing coax cameras | A new all-IP system |
Keeping coax cameras? Choose the DVR8-5000. For a new all-IP system, the NVR 8000 powers the cameras itself.
Swann DVR replacement: what it works with.
The IVSEC DVR8-5000 replaces end-of-life Swann 4, 8 and 16 channel DVRs (DVR4, DVR8 and DVR16, 4480 to 5680 series) and works with all Swann SWPRO analogue cameras. Move each BNC lead across from the old Swann DVR and the cameras keep recording. Coming from a 16 channel Swann DVR? It takes 8 coax cameras plus 4 IP cameras.
Swann DVRs it replaces
SWDVR-4480SWDVR-4550SWDVR-4575SWDVR-4580SWDVR-4680SWDVR-4685SWDVR-4780SWDVR-4880SWDVR-4980SWDVR-5580SWDVR-5680DVR4-4580DVR8-4580DVR16-4580DVR4-4680DVR8-4680DVR8-4980DVR16-4980DVR4-5580DVR8-5580DVR16-5580DVR4-5680DVR8-5680SWDVR-84580HSWDVR-85580HSWDVR-165580HOther Swann DVR4, DVR8 and DVR16 models
Not sure which Swann DVR you have? See our Swann DVR replacement guide for every Swann DVR series, how to read the model number and how to swap it over.
Swann SWPRO cameras it works with
All Swann SWPRO analogue cameras work on the BNC inputs, including these models (model numbers may vary slightly):
SWPRO-1080FLBSWPRO-1080FLDSWPRO-1080ZLBSWPRO-1080ZLDSWPRO-1080PTZSWPRO-H850CAMSWPRO-H851CAMSWPRO-H855CAMSWPRO-H856CAMSWPRO-1080MSBSWPRO-1080MSBBSWPRO-1080MSDSWPRO-3MPMSBSWPRO-3MPMSDSWPRO-5MPMSBSWPRO-5MPMSDSWPRO-4KMSBSWPRO-4KMSDSWPRO-4KDOMESWPRO-A850CAMSWPRO-A850VSWPRO-A851CAMSWPRO-A851VSWPRO-A852PTZSWPRO-A855CAMSWPRO-A856CAMSWPRO-1080MSFBSWPRO-5MPMSFBSWPRO-4KMSFBSWPRO-4KWLBSWPRO-T835CAMSWPRO-T836CAMSWPRO-T845CAMSWPRO-T850CAMSWPRO-T852CAMSWPRO-852BLKSWPRO-T853CAMSWPRO-T855AFSWPRO-T855CAMSWPRO-T857CAMSWPRO-T858CAMSWPRO-T859CAMSWPRO-T890CAMSWPRO-T891CAMSWPRO-810CAMSWPRO-815SWPRO-510CAMSWPRO-530CAMSWPRO-535CAMSWPRO-536CAMSWPRO-615CAMSWPRO-642CAMSWPRO-643CAMSWPRO-735CAMSWPRO-736CAMSWPRO-750CAMSWPRO-751CAMSWPRO-752CAMSWPRO-753CAMSWPRO-754CAMSWPRO-760CAMSWPRO-761CAMSWPRO-770CAMSWPRO-771CAMSWPRO-780CAMSWPRO-781CAMSWPRO-842CAMSWPRO-843CAMSWPRO-960CAMSWPRO-961CAMSWPRO-970CAMSWPRO-971CAMSWPRO-980CAMSWPRO-981CAM
Swann SWNHD network cameras
Many SWNHD network cameras work over ONVIF through a PoE switch. Older SWNHD-815, 816, 819, 820, 821, 830, 831 and 840 cameras need extra setup or may not work, so call us with your model numbers before you buy.
A typical upgrade
Eight old coax cameras, but only five still work? Fit the DVR8-5000, plug in the five working cameras, then add IP cameras through a PoE switch. As each old camera fails, replace its cable and camera with IP, up to 12 cameras in total.
Other compatible analogue cameras
These cameras follow the AHD, CVI, TVI or CVBS standards and should work with the DVR8-5000. The list is not exhaustive.
- CP PLUS: CP-UVR-0401E1-HC, CP-VCG-D10L2, CP-UNC-TA21L1, CP-VAC-D24L2, CP-VAC-D24R2, CP-VCG-T10L2, CP-VAC-T24L1, CP-VCG-D24L1, CP-VCG-TC73L1
- Hikvision: DS-2CE16D0T-IRF, DS-2CE56D0T-IR, DS-2CE16D1T-IR, DS-2CE16C5T-IT3, DS-2CE56F7T-IT3, DS-2CE16F7T-IT, DS-2CE16D5T-IT3, DS-2CE56H1T-IT1, DS-2CE56D7T-IT3, DS-2CE78H0T-IT3, DS-2CE71D8T-PIRL, DS-2CE16H1T-IT5, DS-2CE55C2P-IRM, DS-2CE1582P(N)-VFIR3, DS-2CE5582P(N)-VFIR3
- Dahua Technology: HAC-HFW1200R Series, HAC-HFW1400R Series, HAC-HDW1200R Series, HAC-HDW1400R Series, HAC-HFW2401R-Z-IRE6, HAC-HDW2401R-Z, HAC-HDW2241M-E2, HAC-HDW1801E, DH-CA-FW10A Series, DH-CA-DW12 Series, DH-CA-D1200P Series
- Uniview (UNV): UN-AHD1042 Series, UN-TVI1021 Series
- AVTECH: DG103A, AVT1204, AVT2406, AVT1306, AVC152, AVC155, AVC183
- TVT Digital: TD-7453AS, TD-7423AS, TD-7444TM, TD-7443AE Series, TD-7454AM Series
- Bosch: LTC 0495 Series, LTC 0498 Series, VDC-242 Series, VTC-206F Series
- Samsung (Hanwha Techwin / Wisenet): HCO-6070R, HCO-6020R, HDO-6070R, HDO-6020R, SCO-2080R, SND-5080, SCB-2000
- Honeywell: HD70, HD40, HD51, HB70, HB75, HCC-484, HCD-484
- Pelco: CCC1390 Series, ICS090 Series, IS20 Series, IS50 Series, C10CH Series
- Speco Technologies: HTINTD1, HTB66, HTINTB8, CVC6246, CVC624HR
- Lorex: LBV8531 Series, LBV8532 Series, LBV2711 Series, LEV2712 Series, LBV1511, LBV1521
- Reolink: Reolink Analog D1 Series, Reolink 720p HD Over Coax
- Ezviz: Ezviz 720p Analog HD (TVI-based, older EzGuard)
- Vivotek: MD7530, VS8100
- ACTi: ACD-2100, ACB-1000
ONVIF IP cameras
IP cameras from IVSEC, Dahua, Hikvision, Uniview, Uniarch, VIP Vision, Swann and other ONVIF brands connect through the network port. Viewing and recording work with any ONVIF camera; smart features depend on the camera.
Common questions
Will it replace my Swann DVR?
Yes. It replaces Swann SWDVR-4480, 4580, 4680, 4685, 4880, 5580 and 5680 DVRs, including the DVR8-5580 and 85580H. Move each BNC lead across and your SWPRO cameras keep working. It is an IVSEC recorder, not a Swann product.
Which Swann cameras work with it?
All Swann SWPRO analogue cameras that plug into the BNC inputs, from the SWPRO-1080 series to the 4K MS series and the A, H and T series. The full list is on this page. Some SWNHD network cameras also work through a PoE switch.
Do Swann SWNHD network cameras work?
Some do over ONVIF. Older SWNHD-815, 816, 819, 820, 821, 830, 831 and 840 cameras need extra setup or may not work. Call us with your model numbers before you buy.
How many cameras can it record?
Up to 12 in total: up to eight analogue cameras on the BNC inputs, with IP cameras added over the network, for example 8 analogue plus 4 IP, or 4 analogue plus 8 IP.
Does it power IP cameras?
No. It has no PoE ports. Connect IP cameras to a PoE switch on the same network as the recorder. Coax cameras are powered the same way they were on your old DVR.
Which analogue cameras does it support?
AHD, CVI, TVI and CVBS (D1) cameras up to 8MP. The recorder detects the type on each input by itself.
Which IP cameras does it support?
ONVIF Profile S, G and T IP cameras up to 12MP, including IVSEC, Dahua, Hikvision, Uniview and many other brands. Viewing and recording work with any ONVIF camera; smart features depend on the camera.
What hard drive does it take?
One 3.5" SATA drive up to 10TB. Choose No HDD, 2TB, 4TB or 8TB above; the drive comes fitted.
Can I view it on my phone?
Yes, with the free IVSEC X app for iOS and Android. Scan the recorder's QR code to connect. There is no registration and no monthly fee.
Does it have smart detection?
Yes, with cameras that support it: human and vehicle detection, face detection, line crossing, perimeter intrusion and more. Older analogue cameras use standard motion detection.
Can it record sound?
Yes. It has eight audio inputs for coax cameras or microphones, an audio output, and two-way audio with supported IP cameras.
What warranty does it have?
Three years. InFront Technologies handles warranty and technical support in Australia on 1300 736 970.
Supported by InFront Technologies.
Not sure your cameras will work? Send us the model numbers: call 1300 736 970 or email [email protected].
Installation and safety
Power. The recorder runs from its 12 V plug-in supply. There is no mains wiring. A new power point needs a licensed electrician.
Cabling. Cable run inside walls or ceilings is customer cabling under AS/CA S009 and needs an ACMA-registered cabler.
Privacy and audio. Recording people and conversations is covered by state and territory surveillance laws. Point cameras at your own property, put up signage, and check the rules before you record audio.
Compatibility. Swann is a trademark of its owner. This recorder is made by IVSEC and is not a Swann product.
Figures. From IVSEC's specifications for the DVR8-5000.
| SPECIFICATIONS | |
|---|---|
| Maximum Channels | 12 (Max 8x BNC) OR (12x IP via Network) |
| Channel Combinations | Max 12 Total Channels (Default 8x BNC + 4x IP --> Configurable 8/4, 7/5, 6/6, 5/7, 4/8, 3/9, 2/10, 1/11, 0/12) |
| Maximum Video Resolution (MP) | 8MP / 12MP(IP) |
| Ex. of Channels at a resolution with FPS | 64Mbps IP - Total 96 Mbps |
| Video Compression | H.264, H.264+, H.265, H.265+, MJPEG |
| Video Output Resolution | 4K, HD-1080p, HD-720p, 1.3 MP, D1, VGA |
| Image Display | 1, 4, 6, 8, 9, 12 |
|
Intelligent Video |
Perimeter Intrusion Detection, Face Recognition, Human & Vehicle Detection, Line Crossing Detection, It is important to note, AI features are not available to all cameras. Our testing AI is supported by IvSEC Cameras. |
| Search Method | Continuous, Scheduling, Event Triggered By IVS Filtering. Snapshot Searching, Tagging Footage, Time Lapse, Slice (Multiple Snapshot Thumbnail Search Per Hour), General (Indicated Timeline Search). |
| Total Storage Potential (TB) | 10 |
| HDD Bays, Size | Bays x 1, 2TB(Supplied) up to 10TB HDD 1xSATA |
| Software | Device Search, Config Tool, Surveillance Client (CMS, VMS), "IVSEC X" Mobile app |
| Protocols | TCP, IP, UDP, HTTP, HTTPS, DHCP, FTP, RTP, RTSP, DNS, DDNS, NTP, PPPOE, UPNP, SMTP, SMTP, P2P (QR code) |
| Language | English, French, Spanish, Portuguese, German, Italian, Greek, Danish, Finnish, Russia, Hebrew, Turkish, Bulgarian, Arabic, Korean, Japanese, Thai, Hindi, Romanian, Dutch, Polish |
| Audio Streaming | Two Way for supporting Cameras |
| Non Power Over Ethernet Ports | 1 |
| Power Over Ethernet Ports | 0 - IP Cameras via external PoE Switch |
| Power Over Ethernet | No |
| BNC Ports | 8 |
| Power Supply | DC 12V, 2A 2.1mm |
| Power Consumption | 11W (Without HDD) |
| Connectors | HDD: 3.5" SATA HDD Slot x 1 USB2 Female x 2 Gigabit Ethernet: RJ-45 Port x 1 8 x BNC ports + 8x RCA Audio HDMI, VGA, Audio in and out, Power Jack input, On/Off switch |
| Operating Environment | -10ºC to 50ºC (14ºF-122ºF), Humidity: 90% RH |
| In The Box | Printed quick installation guide, Mouse, HDD screws, Power supply. |
| Product Dimensions (H x W x L) mm |
53 x 300 x 220 |
| Packaging Dimensions (H x W x L) mm |
100 x 430 x 270 |
| Weight (Net) kg | 1.70 |
| Weight (Gross) kg | 2.00 |
| Warranty | 3 Years Parts |