• NC591XB PTZ camera
• Printed quick user guide
• Installation template
• Mounting screws and plugs

• An IVSEC NVR or another ONVIF Profile S, G or T recorder
• Cat5e or Cat6 cable to the camera
• A PoE+ (IEEE 802.3at) port or a 12 V DC supply
• IV2488X pole mount bracket for a pole

01

Plan the mount

Pick a solid wall or pole with a clear view in every direction. IVSEC lists 5.00 kg for this camera; use the IV2488X bracket on a pole.

02

Run cable and power

Run Cat5e or Cat6 to a PoE+ (IEEE 802.3at) recorder or switch port, or use a 12 V DC supply. Seal the cable joints from the weather.

03

Add it to the recorder

Find it with the IVSEC Device Config Tool, set a password, then add it to an IVSEC NVR, the IVSEC app (QR code) or any ONVIF Profile S, G or T recorder.

04

Set presets and patrols

Save up to 255 preset views, link them into a patrol, then draw line crossing or intrusion zones for alarms.

Recorder

An IVSEC NVR

Records the 1080p stream and controls the PTZ, presets and patrols. Any ONVIF Profile S, G or T recorder can also be used.

Power

A PoE+ port

IVSEC lists IEEE 802.3at PoE or 12 V DC, under 14 W. Use a PoE+ recorder or switch port, or ask us about an injector.

Mounting

IV2488X pole mount bracket

IVSEC's listed accessory for fixing the camera to a pole or post.

Storage

A microSD card

Optional, for recording in the camera or as a backup when the network drops.

Farms and rural properties

Patrol sheds, yards and long driveways from one pole, with IR to 100 m at night.

Car parks

Sweep a large lot on a preset patrol and zoom in when something moves.

Warehouses and yards

Watch fences, gates and loading docks from a single high mounting point.

Construction sites

Cover the whole site after hours with patrols and line crossing alarms.

Schools and sports grounds

Ovals, car parks and building fronts from one camera.

Factories and depots

IP67 and IK10 protection for exposed poles and walls.

How far can it zoom?

18x optical, from 5 mm to 90 mm. IVSEC lists the view narrowing from 53.3° across at the wide end to 3.8° at full zoom.

Is a recorder included?

No. This listing is the camera only. It records to an IVSEC NVR, any ONVIF Profile S, G or T recorder, or a microSD card in the camera.

How is it powered?

From a PoE+ (IEEE 802.3at) port or a 12 V DC supply. IVSEC's current datasheet lists under 14 W.

How far does it see at night?

Up to 100 m with its IR illuminators. Day and night switching is automatic.

Can it patrol on its own?

Yes. You can save up to 255 presets and set them as a patrol across the property.

What analytics does it have?

Face recognition, human and vehicle detection, perimeter intrusion, line crossing, stationary object, crossing counting, heat map, crowd density, queue length and licence plate detection.

Does it record sound?

Only with an external microphone. It has an audio input and an audio output connector, but no built-in microphone or speaker. Check your state's surveillance laws before recording audio.

Can it be mounted outside?

Yes. It is rated IP67 against weather and IK10 against impact, and runs from −20 °C to 60 °C.

How do I mount it on a pole?

Use the IV2488X pole mount bracket, which IVSEC lists as the accessory for this camera.

How heavy is it?

IVSEC's current datasheet lists 5.00 kg net and 270 × 160 × 160 mm. An earlier IVSEC datasheet listed 2.5 kg, so plan the mount for the heavier figure.

What is the difference from the NC592XA?

The NC592XA records 5MP at 30 fps with a 25x zoom. The NC591XB records 1080p at 25 fps with an 18x zoom. Both have IR to 100 m and IP67, IK10 housings.

Who can install the cable?

Concealed data cabling to the camera is customer cabling under AS/CA S009 and needs an ACMA-registered cabler. Any new power point needs a licensed electrician.