IVSEC IFTB800 small conduit junction box for 850 and 880 cameras

IVSEC IV2477X sold as IFTB800, seen from below (IVSEC product photo)

IVSEC IFTB800 close-up of the G3/4 threaded side entry

IVSEC IV2477X (IFTB800) dimension drawing

1 / 4

IVSEC Small Conduit Junction Box to suit 850/880 AI Bullet/Dome Security Cameras - IFTB800

Name: IVSEC Small Conduit Junction Box to suit 850/880 AI Bullet/Dome Security Cameras - IFTB800
Brand: IVSEC
SKU: IFTB800
Price: 29.88 AUD
Availability: InStock

SKU IFTB800 In Stock - Ready to Ship

$29.88 inc GST

IVSEC IFTB800: a small white conduit junction box for the IVSEC 850 and 880 Series bullets and domes, with the cable joins inside and a G3/4 side entry.

✓IVSEC IV2477X small conduit junction box
✓Suits IVNC-850B/D and IVNC-880B/D-AI
✓100.5 mm round, 56 mm deep, 0.3 kg
✓G3/4 centre and side entries
✓ADC12 aluminium alloy, IP66
✓Fits under the IFTB810 wall bracket

IVSEC IFTB800 small conduit junction box in white, showing the mounting face and threaded side entry

IVSEC · 850 and 880 Series · Conduit box

A tidy base for
IVSEC 850 and 880 cameras.

The IFTB800 is the IVSEC IV2477X small conduit junction box, fitted to the IVSEC 850 and 880 Series bullets and domes. The cable joins sit inside the box and a threaded side entry takes conduit.

In one sentence: the IVSEC IFTB800 is our code for the IVSEC IV2477X small conduit junction box: white, 100.5 mm round and 56 mm deep, ADC12 aluminium alloy, G3/4 threaded entries, IP66 and a 0.5 kg load rating, for IVSEC 850 and 880 Series bullets and domes.

Junction box only. The camera is sold separately.

This listing is the IFTB800 box with its fixings, for the IVSEC 850 and 880 Series cameras.

In the box

IFTB800 small conduit junction box
Screws
Allen key

You also need

An IVSEC 850 or 880 Series camera
Wall plugs or anchors for your wall
A G3/4 conduit fitting if the cable runs in conduit

Keep the cable tail out of the weather.

The camera screws to the face of the IFTB800, and its cable tail and connectors sit inside the box instead of out on the wall or pushed into the cavity. For bullets on a wall arm, the IFTB800 also fits under the IFTB810 wall bracket.

IVSEC product photo of the IV2477X (sold here as IFTB800) from below, showing the numbered hole pattern and centre entry

Mounting face

Numbered holes around a centre entry.

Numbered screw holes surround a centre cable opening. IVSEC's drawing gives the centre and side entries a G3/4 thread, so the cable can come in from behind or along the wall. IVSEC's photo of the IV2477X.

Close-up of the IVSEC IFTB800 threaded side entry

Conduit entry

G3/4 threaded side entry.

For surface cable runs, a G3/4 conduit fitting screws into the side entry. The box is 100.5 mm across and 56 mm deep. Close-up from our product photo.

How it goes in

From bare wall to mounted camera.

Plan the spot

Choose a spot with a clear view for the 850 or 880 camera and a cable path back to the recorder.

Fix the box

Hold the box in place, mark and drill, then fix it to the wall or soffit, or to the IFTB810 wall bracket.

Bring the cable in

Feed the network cable in through the centre entry from behind, or through conduit at the G3/4 side entry.

Mount the camera

Connect the camera, tuck the connectors into the box, screw the camera to the face and aim it.

At a glance

IFTB800

Show specs

Type

Small conduit junction box

IVSEC model

IV2477X (IFTB800 is the InFront Technologies stock code)

Suits

IVSEC IVNC-850B, IVNC-850D, IVNC-880B-AI and IVNC-880D-AI bullets and domes

Wall arm option

Fits under the IFTB810 wall bracket for 850 and 880 bullets

IVSEC IV2477X list

IVNC000XA, IVNC110X series, NC119XA, IVNC305XC, IVNC110XC-BLK, IVNC317X series, NC319XA, IVNC323X series

Colour

White

Housing

ADC12 aluminium alloy

Fixing screws

Stainless steel 304

Size (H × W × L)

56 × 100 × 100 mm (drawing: 100.5 mm diameter, 56 mm deep)

Cable entries

Centre and side entries with G3/4 thread (drawing)

Load rating

0.5 kg

Weight

0.3 kg

Weather rating

IP66

Operating range

−20 °C to 60 °C, humidity 95% or less

In the box

Bracket, screws, Allen key

Packaging (H × W × L)

115 × 110 × 110 mm

Warranty

3 years

IVSEC IFTB800 dimension drawing: 100.5 mm diameter, 56 mm deep, G3/4 centre and side entries

IVSEC IV2477X dimension drawing, measurements in mm.

Pair it with

What goes with it

Camera

IVSEC 850 or 880 Series

The IVNC-850B and IVNC-880B-AI bullets, and the IVNC-850D and IVNC-880D-AI domes.

Wall arm

IFTB810 wall bracket

For a bullet out from the wall: the IFTB800 fits under the IFTB810.

Conduit

A G3/4 conduit fitting

To run the cable in conduit, use a fitting that matches the G3/4 side entry.

Where it is used

Where the 850 and 880 cameras go.

Home eaves and walls

A neat base for an 850 or 880 bullet or dome, with the joins out of the rain.

Brick and rendered walls

Where the cable can't be hidden in the wall, the box covers the connectors.

Shops and offices

Surface cable in conduit ends neatly at the camera.

Farms and sheds

Steel and block walls where cable runs on the surface.

Driveways

Under the IFTB810 wall bracket for a bullet looking down the drive.

Outdoor areas

IP66 rated for exposed walls and patios.

IFTB800 or IV2422X

	IFTB800 (this box)	IV2422X large conduit box
Size	100.5 mm diameter, 56 mm deep	134.3 mm diameter, 59 mm deep
Cable entry thread	G3/4	G3/4
Weight	0.3 kg	0.3 kg
Load rating	0.5 kg	0.5 kg
Weather rating	IP66	IP66
Suits	IVSEC 850 and 880 Series bullets and domes	NC312X, IVNC317X, IVNC512X, NC528XD, NC531X, NC543ADX; listed on the IVNC-880 datasheets

IFTB800 figures from IVSEC's IV2477X datasheet and drawing; IV2422X from its IVSEC datasheet. The larger IV2422X gives more room inside for cable joins.

Common questions

Which cameras does the IFTB800 suit?

The IVSEC 850 and 880 Series: the IVNC-850B and IVNC-880B-AI bullets and the IVNC-850D and IVNC-880D-AI domes.

Is a camera included?

No. This listing is the junction box with screws and an Allen key. The camera is sold separately.

Is the IFTB800 an IVSEC IV2477X?

Yes. IFTB800 is the InFront Technologies stock code for the IVSEC IV2477X small conduit junction box. The IVSEC IV2477X datasheet is on the Attachments tab.

Can I use it with the IFTB810 wall bracket?

Yes. For 850 and 880 bullets on a wall arm, the IFTB800 fits under the IFTB810 wall bracket.

What thread are the entries?

G3/4. IVSEC's IV2477X drawing shows a G3/4 centre entry and a G3/4 side entry.

How big is it?

100.5 mm in diameter and 56 mm deep, and it weighs 0.3 kg.

How much weight will it hold?

0.5 kg, according to IVSEC's IV2477X datasheet. IVSEC gives the IVNC-880B-AI and IVNC-880D-AI as 0.44 kg each.

Can it go outside?

Yes. It is rated IP66 and for −20 °C to 60 °C with humidity up to 95%.

What is it made of?

An ADC12 aluminium alloy housing with stainless steel 304 screws, in white.

Are wall plugs included?

The box comes with screws and an Allen key. Use plugs or anchors that suit your wall.

Is there a bigger box?

Yes. The IV2422X large conduit box is 134.3 mm across, and IVSEC lists it for the IVNC-880B-AI and IVNC-880D-AI.

What warranty does it have?

3 years, according to IVSEC's IV2477X datasheet. Warranty service through InFront Technologies.

Supported by InFront Technologies.

Not sure which bracket suits your camera or wall? Call 1300 736 970 or email [email protected]. The IVSEC IV2477X datasheet is on the Attachments tab.

Installation and safety

Mechanical part only. The IFTB800 holds the camera. It carries no power or data; follow the camera guide for its cable connections.

Load. Rated for 0.5 kg. Check the camera weight on its own datasheet before you mount it.

Working at height. Cameras usually go on eaves, high walls or ceilings. Use a stable ladder or platform and fixings that suit the surface.

Cabling. Concealed data cabling to the camera is customer cabling under AS/CA S009 and needs an ACMA-registered cabler. A new power point needs a licensed electrician.

Figures. From IVSEC's IV2477X datasheet and dimension drawing (IFTB800 is our code for the IV2477X). The 850 and 880 Series fit is from InFront Technologies; IVSEC's own IV2477X list is above.

IV2477X DatasheetOfficial IVSEC IV2477X datasheet, supplied by InFront Technologies. Download 272.63KB