IVSEC Adaptor Box (Small) IV2444X or IV2455X for use with NC110X*, NC323X*, NC317X*, and NC305X* cameras.
IVSEC IV2466X: a small white adaptor box that joins an IV2444X pendant or IV2455X wall mount to a small IVSEC camera and keeps the cable joints inside.
- ✓For IV2444X pendant and IV2455X wall mounts
- ✓Suits NC110X, NC323X, NC317X, NC305X cameras
- ✓77 mm tall, 100.5 mm diameter, 0.4 kg
- ✓ADC12 housing, stainless steel screws
- ✓IP66, −20 °C to 60 °C, 3 year warranty
Description

The small adaptor box
for IVSEC pendant and wall mounts.
The IVSEC IV2466X sits between an IV2444X pendant mount or IV2455X wall mount and a small IVSEC camera, with room inside for the cable connections. White ADC12 housing, stainless steel screws, IP66.
In one sentence: the IVSEC IV2466X is a small white IP66 adaptor box, 77 mm tall and 100.5 mm across, that joins an IV2444X pendant or IV2455X wall mount to an IVSEC NC110X, NC323X, NC317X or NC305X camera.
Adaptor box only. The mount and the camera are separate.
This listing is the IV2466X adaptor box. It is made to work with an IVSEC pendant or 90° wall mount, which you buy separately.
- IV2466X adaptor box
- Screws
- Allen key
- An IV2444X pendant mount or IV2455X 90° wall mount
- A compatible IVSEC camera (NC110X, NC323X, NC317X or NC305X family)
- Fixings to suit your wall or ceiling for the mount
A neat join between mount and camera.
Small IVSEC turret and bullet cameras don't screw straight onto a pendant or wall arm. The IV2466X adaptor box takes the threaded end of the mount on top and the camera underneath, and keeps the cable joints inside, out of the weather.

Top
Threaded spout for the mount.
IVSEC's drawing marks the top spout as a G1 thread, which takes the IV2444X pendant or the IV2455X wall mount. Fixing holes around the top face line up the box, and the camera fits to the underside.

Size
77 mm tall, 100.5 mm across.
IVSEC's wireframe shows a body 76.8 mm tall (77 mm in the spec table) and 100.5 mm in diameter. It weighs 0.4 kg and is rated for a 0.5 kg load.
How it goes in
Mount, box, camera.
01
Fix the mount
Fix the IV2444X pendant to the ceiling or the IV2455X arm to the wall, using fixings that suit the surface.
02
Screw on the box
Thread the IV2466X onto the end of the mount and tighten it so it sits square.
03
Join the cable
Feed the camera's cable tail into the box, make the network and power connections and tuck them inside.
04
Fit the camera
Secure the camera to the underside with the supplied screws and Allen key, then aim it and check the picture.
At a glance
IV2466X
Show specs
Type
Small adaptor box
Works with mounts
IV2444X pendant mount, IV2455X 90° wall mount
Cameras (IVSEC page)
NC110X, NC323X, NC317X, NC305X
Housing
ADC12 (die-cast aluminium alloy)
Screws
Stainless steel 304
Colour
White
Size
77 × 100 × 100 mm (H × W × L); 100.5 mm diameter on the drawing
Top thread
G1 (IVSEC drawing)
Weight
0.4 kg
Load rating
0.5 kg
Protection
IP66
Operating range
−20 °C to 60 °C, humidity 95% RH or less
Packaging
110 × 110 × 110 mm
In the box
Bracket, screws, Allen key
Warranty
3 years
Pair it with
What this adaptor box works with
Ceiling
IV2444X pendant mount
Hangs the camera from a ceiling or soffit; the IV2466X screws onto its end.
Wall
IV2455X 90° wall mount
Holds the camera out from a wall; the IV2466X joins the arm to the camera.
Camera
A small IVSEC camera
IVSEC lists the NC110X, NC323X, NC317X and NC305X families. Ask us to confirm your exact model.
Where it is used
Where an adaptor box is used.
High ceilings
Drop a turret camera below a raked ceiling or beam on a pendant mount.
Shop fronts
Hold a camera out from the wall on an arm so it looks along the frontage.
Warehouses
Hang cameras from roof structure over aisles and loading bays.
Eaves and soffits
Tidy cable joints inside the box instead of in the roof space.
Car parks
Mount on a wall arm to clear downpipes and signage.
Upgrades
Fit a new small IVSEC camera to an existing IVSEC pendant or wall arm.
IV2466X or IV2477X
| IV2466X (this box) | IV2477X | |
|---|---|---|
| Job | Adaptor between a pendant or wall arm and the camera | Junction box fixed straight to the wall or ceiling |
| Fits to | IV2444X pendant or IV2455X wall mount (G1 top thread) | The surface, with a G3/4 side conduit entry |
| Height | 77 mm | 56 mm |
| Diameter | 100.5 mm | 100.5 mm |
| Weight | 0.4 kg | 0.3 kg |
| Protection | IP66 | IP66 |
Figures from IVSEC's IV2466X and IV2477X datasheets and wireframe drawings.
Common questions
What does the IV2466X do?
It joins an IVSEC IV2444X pendant mount or IV2455X wall mount to a small IVSEC camera, and gives the cable connections a weatherproof space.
Which mounts does it fit?
IVSEC lists the IV2444X pendant mount and the IV2455X 90° wall mount.
Which cameras does it suit?
IVSEC's product page lists the NC110X, NC323X, NC317X and NC305X camera families. Give us your exact model and we'll confirm.
Is the mount included?
No. This listing is the adaptor box with screws and an Allen key. The pendant or wall mount is sold separately.
How big is it?
77 mm tall and 100.5 mm in diameter (77 × 100 × 100 mm in IVSEC's table), and it weighs 0.4 kg.
Can it go outside?
Yes. It is rated IP66 and for −20 °C to 60 °C.
What is it made of?
An ADC12 die-cast alloy housing with stainless steel 304 screws, finished in white.
What thread is on top?
IVSEC's drawing marks the top spout as G1, which is how it screws onto the pendant or wall mount.
How much weight can it carry?
IVSEC rates it for a 0.5 kg load, which covers the small cameras it is made for.
Can I use it without a mount?
It is designed to hang from an IVSEC pendant or wall mount. For a camera fixed straight to a wall or ceiling, use the IV2477X junction box.
Is it available in black?
IVSEC's product list has the IV2466X in white only. Ask us if you need a black finish.
What warranty does it have?
IVSEC gives it a 3 year warranty.
Supported by InFront Technologies.
Not sure which mount or box suits your camera? Call 1300 736 970 or email [email protected]. The datasheet is on the Attachments tab.
Installation and safety
Working at height. Pendant and wall mounts usually go high. Use safe access equipment and fixings rated for the surface.
Cabling. Concealed data cabling to the camera is customer cabling under AS/CA S009 and needs an ACMA-registered cabler.
What it does not do. It is not a mount by itself and has no power or network parts inside; it only joins the mount to the camera and houses the cable joints.
Figures. From IVSEC's IV2466X datasheet and product page.





























































