Skip to main content
    IVSEC IV2456X medium 90 degree wall mount in white
    IVSEC IV2456X close-up of the camera plate and cable slot
    IVSEC IV2456X close-up of the drop face
    IVSEC IV2456X dimension drawing
    1 / 4

    iVSEC Medium 90 Degree Wall Mount for NC312 and NC512 Cameras

    SKU IV2456X In Stock - Ready to Ship
    $37.10 inc GST

    IVSEC IV2456X: a white medium 90 degree wall mount that lets a listed IVSEC turret or dome go on a wall, with the cable hidden inside.

    • ✓White, 80 × 187 × 164 mm, 1.0 kg
    • ✓ADC12 aluminium alloy, stainless screws
    • ✓IP66, 0.5 kg load rating
    • ✓Cable hidden inside the bracket
    • ✓Listed for NC000XA, NC110, NC119XA, NC312XE, NC512, NC319XA, NC340XA, NC550ADX
    • ✓3-year warranty

     
    IVSEC IV2456X medium 90 degree wall mount in white, showing the camera plate and cable slot
    IVSEC · Camera mounting · 90 degree wall mount

    Turrets and domes on a wall.
    A medium 90 degree wall mount.

    The IVSEC IV2456X turns a ceiling-style camera into a wall camera. It fixes to the wall and gives the camera a flat plate to mount on, with the cable hidden inside.

    In one sentence: the IVSEC IV2456X is a white medium 90 degree wall mount in ADC12 aluminium alloy, 80 × 187 × 164 mm, with stainless screws, an IP66 rating and a 0.5 kg load rating, listed for IVSEC NC000, NC110, NC312, NC512 and NC550 cameras.

    Wall mount only. The camera is sold separately.

    This listing is the IV2456X bracket with its fixings. Check your camera against IVSEC's list below before you order.

    In the box
    • IV2456X wall mount
    • Screws
    • Allen key
    You also need
    • A compatible IVSEC camera
    • Wall plugs or anchors for your wall (IVSEC lists screws only)

    A flat plate for the camera, sideways off the wall.

    Turret and dome cameras are made to sit on a flat surface. The IV2456X gives them one, standing out from the wall at 90 degrees, so the camera can be mounted the right way up on a wall and the cable stays inside the bracket.

    IVSEC IV2456X camera plate with screw holes and cable slot, close-up

    Camera plate

    Screw holes around a cable opening.

    The camera screws to this plate, and its cable drops through the centre opening and slot into the bracket. Close-up from IVSEC's product photo.

    IVSEC IV2456X drop face and fixing hole, close-up

    Drop face

    The cable stays behind the face.

    The drop face runs from the wall to the camera plate so the cable is out of sight. Close-up from IVSEC's product photo.

    How it goes in

    From bare wall to mounted camera.

    01

    Check the camera

    Confirm your camera is on IVSEC's IV2456X list and choose a wall spot with a clear view.

    02

    Fix the bracket

    Hold the bracket in place, mark and drill, then fix it to the wall with fixings that suit the surface.

    03

    Bring the cable in

    Feed the network cable from the wall into the bracket and up through the camera plate, with enough slack to connect.

    04

    Mount the camera

    Connect the camera, tuck the connectors in, screw the camera to the plate and aim it.

    Pair it with

    What goes with it

    Camera

    A listed IVSEC camera

    NC000XA, NC110, NC119XA, NC3102ADX, NC312XE, NC512, NC319XA, NC340XA or NC550ADX, or the NC544 series. Ask us if yours is not listed.

    Smaller

    IV2457X small wall mount

    A smaller 90 degree wall mount, listed for NC000XA, NC110X, NC119XA, NC319XA, NC340XA and NC543ADX.

    Black finish

    IV2456X-BLK

    The same medium wall mount in black.

    Where it is used

    Where a 90 degree wall mount fits.

    Homes without eaves

    Turret cameras on a flat wall where there is no soffit to mount under.

    Garages and sheds

    On the wall above a door, looking out over the driveway.

    Shops and offices

    Along a wall over counters and entries.

    Hallways and corridors

    Wall-mounted cameras looking down a corridor.

    Warehouses

    On columns and walls where the roof is too high.

    Outdoor walls

    Rated IP66 for exposed walls and patios.

    IV2456X or IV2457X

    IV2456X (this mount)IV2457X small wall mount
    Size (H × W × L)80 × 187 × 164 mm75 × 132 × 155 mm on IVSEC's drawing
    Load rating0.5 kg1.5 kg
    Weight1.0 kg0.66 kg
    ColourWhiteWhite
    Camera listNC000XA, NC110, NC119XA, NC3102ADX, NC312XE, NC512, NC319XA, NC340XA, NC550ADX, NC544NC000XA, NC110X, NC119XA, NC319XA, NC340XA, NC543ADX
    Weather ratingIP66IP66

    Figures from IVSEC's IV2456X and IV2457X datasheets.

    Common questions

    Which cameras fit the IV2456X?

    IVSEC lists the NC000XA, NC110ADX, NC110XC, NC110XC-BLK, NC119XA, NC3102ADX, NC312XE, NC512ADX, NC512ADX-BLK, NC512XD, NC512XD-BLK, NC319XA, NC340XA, NC550ADX, NC544 series.

    Is a camera included?

    No. This listing is the wall mount with screws and an Allen key. The camera is sold separately.

    What does a 90 degree wall mount do?

    It gives a turret or dome camera a flat plate standing out from the wall, so a camera made for ceilings can go on a wall.

    How big is it?

    80 × 187 × 164 mm (H × W × L) and 1.0 kg. IVSEC's drawing shows 187 by 163.7 mm.

    How much weight will it hold?

    0.5 kg, according to IVSEC. Check your camera weight on its datasheet.

    Does the cable stay hidden?

    Yes. IVSEC describes cable management inside the bracket, so the cable runs from the wall to the camera out of sight.

    Can it go outside?

    Yes. IVSEC rates it IP66 and for −20 °C to 60 °C with humidity up to 95%.

    What is it made of?

    ADC12 aluminium alloy with stainless steel 304 screws, in white.

    Are wall plugs included?

    IVSEC lists the bracket, screws and an Allen key. Use plugs or anchors that suit your wall.

    What is the difference from the IV2457X?

    The IV2456X is the medium size, 80 × 187 × 164 mm and rated to 0.5 kg. The IV2457X is smaller, rated to 1.5 kg, and listed for a shorter camera list.

    Is there a black version?

    Yes. The IV2456X-BLK is the same bracket in black.

    What warranty does it have?

    3 years, according to IVSEC. Warranty service through InFront Technologies.

    Supported by InFront Technologies.

    Not sure which bracket suits your camera or wall? Call 1300 736 970 or email [email protected]. The IVSEC datasheet is on the Attachments tab.

    Installation and safety

    Mechanical part only. The IV2456X holds the camera. It carries no power or data; follow the camera guide for its cable connections.

    Load. Rated for 0.5 kg. Check the camera weight on its own datasheet before you mount it.

    Working at height. Cameras usually go on eaves, high walls or ceilings. Use a stable ladder or platform and fixings that suit the surface.

    Cabling. Concealed data cabling to the camera is customer cabling under AS/CA S009 and needs an ACMA-registered cabler. A new power point needs a licensed electrician.

    Figures. From IVSEC's IV2456X datasheet and product page. The datasheet prints one model as NX512XD-BLK; we have listed it as NC512XD-BLK.

    INFRONTTECH Promotional BannerINFRONTTECH Promotional BannerINFRONTTECH Promotional Banner

    Need help choosing?

    Tell us about your property and we'll recommend the right cameras and recorder.

    07 5609 4910

    Sydney 02 8814 6008
    [email protected]

    Mon–Fri, 9am–5pm AEST

    Saved to your wishlistFind it any time in your account.View list