IVSEC IV2491X: the white 90° wall arm that holds IVSEC's IV2490X dual camera junction box out from a wall, joined by the IV2492X adaptor box.
- ✓For the IV2490X and IV2492X dual camera set
- ✓Cable runs concealed through the arm
- ✓97 × 182 × 304 mm (H × W × L)
- ✓0.9 kg, ADC12 alloy, stainless steel screws
- ✓IP66, 3 year warranty

The wall arm
for IVSEC's dual camera box.
The IVSEC IV2491X is a white 90° wall arm. IVSEC makes it to hold the IV2490X dual camera junction box out from a wall, joined by the IV2492X adaptor box, with the cable hidden inside the arm.
In one sentence: the IVSEC IV2491X is a white IP66 90° wall mount arm, 97 × 182 × 304 mm and 0.9 kg, needed to fix the IV2490X dual camera junction box and IV2492X adaptor box to a wall.
Wall arm only. Junction box, adaptor box and cameras are separate.
This listing is the IV2491X arm. For IVSEC's dual camera set-up you also need the IV2492X adaptor box and the IV2490X junction box.
- IV2491X 90° wall mount
- Screws
- Allen key
- IV2492X adaptor box
- IV2490X dual camera junction box and two compatible cameras
- Fixings rated for your wall
Out from the wall, clear of the eaves.
A wall arm holds the cameras away from the building so they look along the wall and past gutters, downpipes and signs. The IV2491X carries IVSEC's dual camera box and routes the cable through the arm.

Assembled
Arm, adaptor box, dual camera box.
IVSEC's photo shows the IV2491X with the IV2492X adaptor box and IV2490X junction box fitted, carrying two cameras. Everything except the arm is sold separately.

Wall plate
Slotted plate for the wall fixings.
The tall wall plate has slots for the wall fixings. IVSEC describes the arm as keeping the cable concealed and protected. ADC12 die-cast alloy with stainless steel 304 screws.
How it goes in
Arm, adaptor, box, cameras.
01
Fix the arm
Mark the wall plate, drill and fix the IV2491X with fixings rated for the wall and the weight of the full assembly.
02
Feed the cable
Bring the network cable through the wall behind the plate and through the arm.
03
Fit adaptor and box
Fit the IV2492X adaptor box to the end of the arm, then the IV2490X junction box below it.
04
Connect the cameras
Connect and fit the two cameras to the junction box, then aim them.
At a glance
IV2491X
Show specs
Type
90° wall mount arm
Used with
IV2490X dual camera junction box and IV2492X adaptor box
Compatible (IVSEC list)
IV2492X, IV2482X
Screws
Stainless steel 304
Housing
ADC12 die-cast alloy
Colour
White
Size
97 × 182 × 304 mm (H × W × L)
Weight
0.9 kg
Load rating
0.5 kg (IVSEC spec table)
Protection
IP66
Operating range
−20 °C to 60 °C, humidity 95% RH or less
In the box
Bracket, screws, Allen key
Warranty
3 years

IVSEC wireframe of the IV2491X: side, front and end views and the wall plate.
Pair it with
The rest of IVSEC's dual camera wall set
Adaptor
IV2492X adaptor box
Fits between this arm and the IV2490X junction box.
Junction box
IV2490X dual camera junction box
Carries two cameras and splits one PoE cable to both.
Corner
IV2493X corner adaptor
IVSEC lists the IV2491X for its corner adaptor, to mount the arm on an outside corner.
Where it is used
Where a wall arm helps.
Long walls
Hold the cameras out so they see along the building in both directions.
Under eaves
Clear gutters and fascias that would block a flush-mounted camera.
Warehouses
Cover a loading dock and yard from one point on the wall.
Car parks
Mount on a wall facing two rows of bays.
Building corners
With the IV2493X corner adaptor, cover two sides of a building.
Gates and entries
One camera on the gate, one on the approach.
IV2491X or IV2493X
| IV2491X wall arm (this listing) | IV2493X corner adaptor | |
|---|---|---|
| Job | Holds the dual camera box out from a flat wall | Lets a mount fix to an outside building corner |
| Works with | IV2492X, IV2482X (IVSEC list) | IV2422X*, IV2433X, IV2455X, IV2456X*, IV2457X*, IV2477X*, IV2491X |
| Weight | 0.9 kg | 0.4 kg |
| Load rating | 0.5 kg | 6.0 kg |
| Protection | IP66 | IP66 |
Figures from IVSEC's IV2491X and IV2493X datasheets. The two can be used together on a corner.
Common questions
What is the IV2491X for?
It is the 90° wall arm IVSEC specifies for its IV2490X dual camera junction box, joined by the IV2492X adaptor box.
Is the junction box included?
No. This listing is the arm with screws and an Allen key. The IV2492X and IV2490X are sold separately.
Do I need the IV2492X?
Yes. IVSEC's datasheet titles the arm as needed with the IV2490X junction and IV2492X adaptor box; the adaptor joins the two.
How big is it?
97 × 182 × 304 mm (H × W × L), and it weighs 0.9 kg.
Does the cable run inside the arm?
Yes. IVSEC describes the arm as keeping the camera cable concealed and protected.
Can it go outside?
Yes. It is rated IP66 and for −20 °C to 60 °C.
What is it made of?
ADC12 die-cast alloy with stainless steel 304 screws, finished in white.
Can I mount it on a corner?
Yes, with the IV2493X corner adaptor, which lists the IV2491X as compatible.
Will it hold a single small camera?
It is made for IVSEC's dual camera box. For one small camera, IVSEC's IV2455X wall mount with an IV2466X adaptor box is the usual choice; ask us.
How much weight can it carry?
IVSEC's spec table says 0.5 kg. With the box and two cameras the load is higher, so ask us before you order.
Is it available in black?
IVSEC lists the IV2491X in white only.
What warranty does it have?
IVSEC gives it a 3 year warranty.
Supported by InFront Technologies.
Building a dual camera wall mount? Call 1300 736 970 or email [email protected] and we'll check the parts. The datasheet is on the Attachments tab.
Installation and safety
Working at height. Use safe access equipment. Fix the arm into solid masonry or framing with fixings rated for the full assembly.
Cabling. Concealed data cabling to the cameras is customer cabling under AS/CA S009 and needs an ACMA-registered cabler.
What it does not do. It is an arm only; it has no junction box, power or network parts.
Figures. From IVSEC's IV2491X datasheet and wireframe. The load rating is as IVSEC prints it.