Skip to main content

Category

Akuvox Mounting & Accessories

73 products

Akuvox mounting kits and accessories for door phones and monitors

Hoods · Boxes · Cards · Modules

Akuvox Mounting & Accessories

Mounting kits, rain hoods, desk stands, RFID cards and expansion modules for Akuvox door phones and indoor monitors.

Match the in-wall or on-wall kit to the door-phone or indoor-monitor family. Cards, fobs and LTE modules sit here as well.

  • Flush & surface
  • Rain hoods
  • RFID cards
  • LTE modules

Akuvox mounts, cards & accessories Australia

Shop Akuvox mounting kits, rain hoods, desk stands, RFID credentials and expansion modules for a clean finished install.

R20, S53x, X915, E-series and A-series each have their own boxes and hoods — order the kit that matches the outdoor or indoor model.

Keep spare cards and fobs on the truck for handover day.

  • In-wall / on-wall kits — flush and surface boxes per model family
  • Hoods & stands — rain hoods, angle kits and desk stands
  • Credentials — RFID cards and fobs
  • Modules — LTE and expansion parts

Need help choosing? Call 1300 736 970 for model selection, mounting kits and SmartPlus commissioning.

Akuvox access reader accessory

Finish the install cleanly

Mounting kits and hoods make the outdoor panel look intentional. Browse cards and fobs for credentials, and keep model-specific in-wall boxes matched to the door phone family.

  • Model-matched flush / surface kits
  • Rain hoods for exposed entries
  • Cards, fobs and expansion modules
Browse mounts & accessories

Akuvox Mounting & Accessories FAQ

How do I pick the right mounting kit?

Match the kit part number to the door phone or indoor monitor family (R20, S53x, E-series, etc.). Using the wrong box usually means a poor flush finish.

Do I need a rain hood?

Exposed outdoor stations almost always need the matching hood or canopy. Protected porches may only need the surface or flush box.

Are cards universal?

Use credentials that match the reader frequency (commonly 13.56 MHz and/or 125 kHz). Check the reader or door phone specification.

Akuvox smart intercoms with Australian support. InFront Technologies helps installers pick door stations, indoor monitors, readers and 2-wire retrofit kits — call 1300 736 970.

Intercom basics

What is SIP?

SIP (Session Initiation Protocol) is the open standard that VoIP phones use to set up voice and video calls over a network. An Akuvox door station is really a video phone: when a visitor presses the button, it places a SIP call to whoever should answer.

  1. Door stationVisitor presses call
  2. Your networkPoE, Wi-Fi or 2-wire
  3. Anyone you chooseMonitor · app · desk phone · PBX

Why it matters

  • Answer anywhere — an indoor monitor, the SmartPlus app on your phone, an office desk phone or the reception switchboard.
  • Open, not locked in — SIP is an industry standard, so door stations work with existing VoIP phone systems and future upgrades.
  • Standard cabling — runs over normal network cable with PoE, Wi-Fi, or existing two-wire runs through 2-wire adaptors.
  • Scales with the site — the same technology covers one house or hundreds of apartments, with call groups and diverts.

SIP vs a traditional intercom

Older analogue intercoms use proprietary wiring and only talk to their own handsets. A SIP system is part of your network, so it can ring phones, forward to mobiles after hours and be managed remotely.

Browse SIP door stations Ask us: 1300 736 970
Akuvox A01 / A02 / A03 black on-wall mounting box — front Akuvox A01 / A02 / A03 black on-wall mounting box — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox A01 / A02 / A03 Black On-Wall Mounting Box — AK-00568P11

Akuvox
AK-00568P11
$ 11.50
Akuvox AK-00568P11 is the black on-wall box for the A01, A02 and A03 access control terminals. These 86 × 86 mm readers hang on an 86 junction box; where there is no box in the wall, this one fixes to the surface and gives the reader a neat, matching base.✓Surface-mount 86 box for Akuvox A01, A02 and A03✓Use where no 86 flush box is built...
Akuvox S538 in-wall mounting box — right three-quarter view Akuvox S538 in-wall mounting box — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S538 In-Wall Installation Kit for Flush Mounting — AK-S538INWALLK

Akuvox
AK-S538INWALLK
$ 59.70
Akuvox AK-S538INWALLK flush-mounts the S538 8″ Android facial recognition door phone. The metal back box fits a 290 × 130 × 34 mm wall opening, the flush bracket screws onto it, and the S538 slides down onto the bracket for a built-in finish. Screws and anchors included.✓Flush-mounts the Akuvox S538 (297 × 136.4 × 29 mm)✓Wall cut-out 290 ×...
Akuvox S538 black in-wall rain cover — right three-quarter view Akuvox S538 black in-wall rain cover — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S538 Black In-Wall Rain Cover for Flush-Mounted S538 — AK-S538INWALLH

Akuvox
AK-S538INWALLH
$ 59.70
Akuvox AK-S538INWALLH is the black in-wall rain cover for a flush-mounted S538 8″ Android door phone. An open frame with a hood, it sits around the recessed S538 at the wall face and keeps rain and overhead sun off the screen and cameras.✓Rain cover for a flush-mounted Akuvox S538✓Open frame, 306.7 × 141.4 mm, hood projects 34.7 mm at the...
Akuvox S538 black on-wall mounting box — right three-quarter view Akuvox S538 black on-wall mounting box — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S538 Black On-Wall Installation Kit for Surface Mounting — AK-S538ONWALLK

Akuvox
AK-S538ONWALLK
$ 59.70
Akuvox AK-S538ONWALLK is the on-wall installation kit for the S538 8″ Android facial recognition door phone. The S538 ships without a box: this slim black plate screws to the wall, the S538 slides down onto its hooks and is locked in with a Torx screw. Template, screws and anchors are included.✓Surface-mounts the Akuvox S538 (297 × 136.4 × 29...
Akuvox S538 black on-wall rain cover — right three-quarter view Akuvox S538 black on-wall rain cover — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S538 Black On-Wall Rain Cover for Surface-Mounted S538 — AK-S538ONWALLH

Akuvox
AK-S538ONWALLH
$ 59.70
Akuvox AK-S538ONWALLH is the black on-wall rain cover for the S538 8″ Android facial recognition door phone. Its back plate fits behind the S538 on-wall box, and the hood shelters the screen, cameras and card reader from rain and overhead sun.✓Rain cover for a surface-mounted Akuvox S538✓306.7 × 141.4 mm, projecting 51.4 mm at the...
Akuvox S539 in-wall mounting box — front Akuvox S539 in-wall mounting box — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S539 In-Wall Installation Kit for Flush Mounting — AK-S539INWALLK

Akuvox
AK-S539INWALLK
$ 57.10
Akuvox AK-S539INWALLK flush-mounts the S539 10″ Android facial recognition door phone. The metal back box fits a 353.5 × 169 × 41 mm wall opening, the flush bracket screws onto it and the S539 mounts on the bracket for a built-in finish. Screws and anchors included.✓Flush-mounts the Akuvox S539 (363.5 × 179.8 × 30.8 mm)✓Wall cut-out 353.5 ×...
Akuvox S539 black in-wall rain hood — front Akuvox S539 black in-wall rain hood — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S539 Black In-Wall Rain Hood for Flush-Mounted S539 — AK-S539INWALLH

Akuvox
AK-S539INWALLH
$ 57.10
Akuvox AK-S539INWALLH is the black in-wall rain hood for a flush-mounted S539 10″ Android door phone. The 379 × 188.4 mm open frame sits around the recessed S539 at the wall face and projects 48.3 mm at the top to keep rain and overhead sun off the screen and cameras.✓Rain hood for a flush-mounted Akuvox S539✓Open frame, 379.0 × 188.4 mm,...
Akuvox S539 black on-wall rain hood — front Akuvox S539 black on-wall rain hood — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S539 Black On-Wall Rain Hood for Surface-Mounted S539 — AK-S539ONWALLH

Akuvox
AK-S539ONWALLH
$ 57.10
Akuvox AK-S539ONWALLH is the black on-wall rain hood for a surface-mounted S539 10″ Android door phone. Its back plate fixes behind the S539 on-wall bracket, and the 60 mm-deep hood shelters the screen, cameras and card reader from rain and overhead sun.✓Rain hood for a surface-mounted Akuvox S539✓380.2 × 188.4 mm, projecting 60 mm at the...
Akuvox A08S in-wall flush-mounting box — right three-quarter view Akuvox A08S in-wall flush-mounting box — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox A08S Black In-Wall Flush-Mounting Box — AK-A08-INWALL

Akuvox
AK-A08-INWALL
$ 30.70
Akuvox AK-A08-INWALL is the in-wall box that flush-mounts the slim A08S access terminal. Cut a 135 × 42 × 38 mm pocket, screw the box in and the 50 mm-wide reader sits almost flush with the wall or door frame. Fixings included.✓Flush-mounting box for the Akuvox A08S (140 × 50 × 26.7 mm)✓Wall cut-out 135 × 42 × 38 mm (H × W ×...
Akuvox E12 black on-wall rain hood — right three-quarter view Akuvox E12 black on-wall rain hood — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox E12 Black On-Wall Rain Hood for E12S and E12W Video Doorbells — AK-E12XONH

Akuvox
AK-E12XONH
$ 57.10
Akuvox AK-E12XONH is the on-wall rain hood for the E12 video doorbell. The black hood wraps the top and sides of the doorbell, keeping driving rain off the lens and call button and cutting overhead glare on exposed doors.✓On-wall rain hood for the Akuvox E12 video doorbell✓Fits the E12 series: E12S, E12S Black, E12W Black and...
Akuvox E12 black angle bracket — right three-quarter view Akuvox E12 black angle bracket — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox E12 Black Angle Bracket for E12S and E12W Video Doorbells — AK-E12XANGLE

Akuvox
AK-E12XANGLE
$ 30.80
Akuvox AK-E12XANGLE is the angle bracket for the E12 video doorbell. When the doorbell has to go on a wall at right angles to the path — a gate post, a side wall or the return beside a door — the bracket turns it towards visitors so the camera sees faces, not the far wall.✓Slanted surface mount for the Akuvox E12 video doorbell✓Fits the E12...
Akuvox R20K / R25K black in-wall installation kit — front Akuvox R20K / R25K black in-wall installation kit — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R20K / R25K / R20B Black In-Wall Installation Kit — AK-R20KINWALLK-B

Akuvox
AK-R20KINWALLK-B
$ 57.80
Akuvox R20K / R25K / R20B in-wall kit in black recesses a 185 × 84.5 mm R20K keypad, R25K or R20B multi-button door phone into the wall. It contains the flush-mounting box, the black flush-mounting bracket, wall fixings, Torx screws and the Torx wrench.✓Flush-mounting box plus black 226 × 108 mm decorative frame✓Fits Akuvox R20K, R20K-L,...
Akuvox R20K / R25K / R20B silver in-wall rain hood — front Akuvox R20K / R25K / R20B silver in-wall rain hood — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R20K / R25K / R20B Silver In-Wall Rain Hood — AK-R20KBINH

Akuvox
AK-R20KBINH
$ 57.80
Akuvox R20K / R25K / R20B in-wall rain hood in silver is a rain canopy for the 185 × 84.5 mm R20K keypad, R25K fisheye and R20B 2–5 button door phones. It keeps rain and overhead sun off the camera, keypad or buttons and card reader on flush-mounted stations.✓Silver in-wall rain hood for the R20K, R20K-L, R25K and R20B✓229.5 × 111 mm frame,...
Akuvox R20K / R25K / R20B black on-wall rain hood
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R20K / R25K / R20B Black On-Wall Rain Hood — AK-R20KBONH-BLACK

Akuvox
AK-R20KBONH-BLACK
$ 57.80
Akuvox R20K / R25K / R20B on-wall rain hood in black is a rain canopy for the 185 × 84.5 mm R20K keypad, R25K fisheye and R20B 2–5 button door phones. It keeps rain and overhead sun off the camera, keypad or buttons and card reader on surface-mounted stations.✓Black on-wall rain hood for the R20K, R20K-L, R25K and R20B✓193 × 88 mm, 51 mm...
Akuvox R20K / R25K black rotatable angle bracket — front Akuvox R20K / R25K black rotatable angle bracket — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R20K / R25K / R20B Black Rotatable Angle Bracket — AK-R20KANGLE

Akuvox
AK-R20KANGLE
$ 59.70
Akuvox R20K / R25K / R20B angle bracket is a black rotatable mount that sits between the wall and a surface-mounted R20K, R25K or R20B, so the door phone can be turned to face visitors on a side path, gate pillar or corner instead of looking across the approach.✓Turns a surface-mounted R20K, R20K-L, R25K or R20B to face the visitor✓184 ×...
Akuvox S532 in-wall mounting box — front Akuvox S532 in-wall mounting box — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S532 In-Wall Installation Kit for Flush Mounting — AK-S532INWALLK

Akuvox
AK-S532INWALLK
$ 57.10
Akuvox AK-S532INWALLK flush-mounts the S532 keypad SIP door phone. The metal back box goes into a 289 × 98 × 52.5 mm wall opening, the bracket screws onto it, and the S532 hangs on the bracket so only the front panel stands proud of the wall. Screws and anchors included.✓Flush-mounts the Akuvox S532 (301 × 106 × 35.8 mm)✓Wall cut-out 289 ×...
Akuvox S532 black in-wall rain cover — front Akuvox S532 black in-wall rain cover — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S532 Black In-Wall Rain Cover for Flush-Mounted S532 — AK-S532BINH

Akuvox
AK-S532BINH
$ 57.10
Akuvox AK-S532BINH is the in-wall rain cover for a flush-mounted S532 keypad door phone. It is an open black frame with a hood: it sits around the recessed S532 at the wall face and shelters the camera, display and keypad from rain and overhead sun.✓Rain cover for a flush-mounted Akuvox S532✓Open frame, 312 × 110 mm, hood projects 52.5 mm at...
Akuvox S532 black on-wall mounting box — front Akuvox S532 black on-wall mounting box — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S532 Black On-Wall Installation Kit for Surface Mounting — AK-S532ONWALLK

Akuvox
AK-S532ONWALLK
$ 57.10
Akuvox AK-S532ONWALLK is the on-wall installation kit for the S532 keypad SIP door phone. The S532 ships without a mounting box: this black surface box screws to the wall, the S532 hangs on its hooks and locks in with a Torx screw. Template, screws and anchors are included.✓Surface-mounts the Akuvox S532 (301 × 106 × 35.8 mm)✓Black wall box,...
Akuvox R27 / R28 wall-mounting (surface) box Akuvox R27 / R28 wall-mounting (surface) box 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R27 / R28 On-Wall Installation Kit with Surface Box — AK-R27R28ONWALLK

Akuvox
AK-R27R28ONWALLK
$ 57.10
Akuvox R27 / R28 on-wall kit surface-mounts an R28A or R27 door phone. The wall-mounting box fixes over an 86 mm wall box or straight to the wall, and the station hangs on it and locks with its own hex screws. The door phones ship without mounting hardware, so a surface install needs this kit.✓Wall-mounting box for R27 / R28, 279.4 × 129.4 × 28...
Akuvox R27 / R28 silver in-wall rain cover — front Akuvox R27 / R28 silver in-wall rain cover — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R27 / R28 Silver In-Wall Rain Cover — AK-R28-7INWALLH

Akuvox
AK-R28-7INWALLH
$ 57.90
Akuvox R27 / R28 in-wall rain cover is a silver canopy for a flush-mounted R28A or R27, keeping rain and overhead sun off the screen, camera, keypad and card reader. Fit it with the R27 / R28 in-wall installation kit.✓Silver in-wall rain cover for Akuvox R27 and R28✓Protects the screen, camera, keypad and reader from rain and...
Akuvox black steel C-clip bracket for S562, S563 and S567
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox C-Clip Black Steel Mounting Bracket for S562, S563 and S567 — AK-S562CCLIP

Akuvox
AK-S562CCLIP
$ 30.70
Akuvox C-clip is a black steel mounting bracket for the S562, S563 and S567 indoor monitors, for installs where a recessed wall box is not wanted.✓Black steel C-clip bracket✓For Akuvox S562, S563 and S567 indoor monitors✓Surface-mount option without recessing into the wall✓Bracket only — monitor sold separately
Akuvox S562 black desk stand — front Akuvox S562 black desk stand — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S562 Black Desk Stand for S562 and S562W 7-inch Indoor Monitors — AK-S562DESK

Akuvox
AK-S562DESK
$ 30.70
Akuvox S562 desk stand in black lets an Akuvox S562 7-inch indoor monitor sit on a desk, reception counter or bedside table instead of on the wall. The monitor clips onto the A-frame and leans back at a comfortable viewing angle.✓Official Akuvox S562 Desktop Stand for the S562 and S562W 7-inch indoor monitors✓Holds the screen leaning back at...
Akuvox S562 black surface-mount angle box — right three-quarter view Akuvox S562 black surface-mount angle box — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S562 Black Surface-Mount Angle Box for S562 and S562W 7-inch Indoor Monitors —...

Akuvox
AK-S562SURFACE
$ 30.70
Akuvox S562 surface-mount angle box in black mounts on the wall surface and holds an Akuvox S562 7-inch indoor monitor at an angle instead of flat against the wall — useful where the screen would otherwise be viewed from below or from the side.✓Official Akuvox S562 Surface Mount Angle Box for the S562 and S562W 7-inch indoor...
Akuvox S563 black desk stand — front Akuvox S563 black desk stand — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S563 Black Desk Stand for S563 and S563W 8-inch Indoor Monitors — AK-S563DESK

Akuvox
AK-S563DESK
$ 30.70
Akuvox S563 desk stand in black lets an Akuvox S563 8-inch Android indoor monitor stand on a desk, reception counter or kitchen bench. The monitor clips onto the A-frame and leans back at a comfortable viewing angle.✓Official Akuvox S563 Desktop Bracket for the S563 and S563W 8-inch indoor monitors✓Holds the screen leaning back at a...
Akuvox S563 black surface-mount angle box — front Akuvox S563 black surface-mount angle box — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S563 Black Surface-Mount Angle Box for S563 and S563W 8-inch Indoor Monitors —...

Akuvox
AK-S563SURFACE
$ 30.70
Akuvox S563 surface-mount angle box in black fixes to the wall surface and holds an Akuvox S563 8-inch indoor monitor at an angle instead of flat against the wall, so the screen faces the people using it.✓Official Akuvox S563 Surface Mount Angle Box for the S563 and S563W 8-inch indoor monitors✓Surface-mounted wedge that tilts the screen...
Akuvox S567 black desk stand — right three-quarter view Akuvox S567 black desk stand — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox Black Desk Stand for S567 and S565 10-inch Indoor Monitors — AK-S567DESK

Akuvox
AK-S567DESK
$ 30.70
Akuvox S567 / S565 desk stand in black lets a 10-inch Akuvox S567 or S565 indoor monitor stand on a desk, kitchen bench or reception counter. The screen clips onto the A-frame and leans back for comfortable viewing.✓Official Akuvox desk stand for the 10-inch S567 and S565 indoor monitors✓A-frame design holds the screen at a natural viewing...
Akuvox S567 black surface-mount angle box — right three-quarter view Akuvox S567 black surface-mount angle box — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox Black Surface-Mount Angle Box for S567 and S565 10-inch Indoor Monitors —...

Akuvox
AK-S567SURFACE
$ 30.70
Akuvox S567 / S565 surface-mount angle box in black fixes to the wall surface and holds a 10-inch Akuvox S567 or S565 indoor monitor at an angle instead of flat against the wall, so the screen faces the people using it.✓Official Akuvox angle box for the 10-inch S567 and S565 indoor monitors✓Surface-mounted wedge that tilts the screen towards...
Akuvox IT88 / C319 black desktop stand — three-quarter view
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox Black Desktop Stand for IT88 and C319 10-inch Indoor Monitors — AK-IT88C19TABLEB

Akuvox
AK-IT88C19TABLEB
$ 30.70
Akuvox IT88 / C319 desktop stand in black is a table bracket for Akuvox’s 10-inch IT88 and C319 indoor monitors. The monitor hooks onto the frame and the angled foot rests on the desk, leaning the screen back for easy viewing.✓Official Akuvox desktop stand for IT88 and C319 monitors✓Open frame with top hooks and an angled foot✓IT88...
Akuvox C313 / C315 black table bracket — right three-quarter view Akuvox C313 / C315 black table bracket — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox Black Table Bracket for C313 and C315 7-inch Indoor Monitors — AK-C13C15TABLEB

Akuvox
AK-C13C15TABLEB
$ 30.70
Akuvox C313 / C315 table bracket in black is a slim desk stand for Akuvox’s 7-inch C313 and C315 indoor monitors. The monitor clips onto the upright plate and the flat foot sits on a desk or bedside table.✓Official Akuvox desktop bracket for C313 and C315 monitors✓Upright plate with mounting clips on a flat foot✓Fits C313 (including...
Akuvox S535 LTE expansion module Akuvox S535 LTE expansion module 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S535 LTE Expansion Module — AK-S535-LTE

Akuvox
AK-S535-LTE
$ 379.00
Akuvox S535 LTE module connects the S535 facial recognition door phone over LTE, for entrances where a network cable is impractical. It plugs into the expansion port under the screen — module only, the door station and SIM are sold separately.✓Fits the Akuvox S535 expansion port — no extra cabling✓LTE bands include B1, B3, B5, B7 and B28 for...
Akuvox S535 fingerprint expansion module Akuvox S535 fingerprint expansion module 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S535 Fingerprint Expansion Module — AK-S535-F

Akuvox
AK-S535-F
$ 303.00
Akuvox S535 fingerprint module adds a finger reader to the S535 facial recognition door phone. It plugs into the expansion port under the screen and stores up to 20,000 finger templates — module only, the door station is sold separately.✓Fits the Akuvox S535 expansion port — no extra cabling✓Up to 20,000 finger templates alongside the S535’s...
Akuvox R20A / R25A silver in-wall installation kit — flush box Akuvox R20A / R25A silver in-wall installation kit — flush box 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R20A / R25A Silver In-Wall Installation Kit with Flush Box — AK-R20INWALLK

Akuvox
AK-R20INWALLK
$ 57.80
Akuvox R20A / R25A in-wall kit in silver recesses an R20A, R25A or R20A-2 single-button door phone into the wall. You get the flush-mounting box, the silver 189 × 120 mm decorative panel that frames the station, and the screws, anchors and Torx wrench to lock it in.✓Flush-mounting box plus silver decorative panel (189 × 120 mm)✓Fits Akuvox...
Akuvox S535 induction loop expansion module Akuvox S535 induction loop expansion module 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S535 Induction Loop Expansion Module — AK-S535-IL

Akuvox
AK-S535-IL
$ 76.10
Akuvox S535 induction loop module adds a hearing loop to the S535 facial recognition door phone, so visitors and residents with hearing aids hear the call clearly. It plugs into the expansion port under the screen — module only, the door station is sold separately.✓Fits the Akuvox S535 expansion port — no extra cabling✓Sends call audio to...
Akuvox R20A / R25A black in-wall installation kit — flush box Akuvox R20A / R25A black in-wall installation kit — flush box 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R20A / R25A Black In-Wall Installation Kit with Flush Box — AK-R20INWALLK-BLACK

Akuvox
AK-R20INWALLK-BLACK
$ 57.10
Akuvox R20A / R25A in-wall kit in black recesses an R20A, R25A or R20A-2 single-button door phone into the wall. You get the flush-mounting box, the black 189 × 120 mm decorative panel that frames the station, and the screws, anchors and Torx wrench to lock it in.✓Flush-mounting box plus black decorative panel (189 × 120 mm)✓Fits Akuvox...
Akuvox S535 in-wall mounting box — right three-quarter view Akuvox S535 in-wall mounting box — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S535 In-Wall Mounting Box and Bracket for Flush Mounting — AK-S535INWALLK

Akuvox
AK-S535INWALLK
$ 57.10
Akuvox AK-S535INWALLK recesses the S535 5″ facial recognition door phone into the wall. The metal flush box fits a 203.5 × 94 × 34 mm opening, the bracket screws onto it and the S535 hangs on the bracket. This is the standard box for an S535 with no module; with a fingerprint, loop or LTE module fitted, use the module version.✓Flush-mounts the...
Akuvox R20A / R25A silver in-wall rain hood — front Akuvox R20A / R25A silver in-wall rain hood — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R20A / R25A Silver In-Wall Rain Hood — AK-R20INH

Akuvox
AK-R20INH
$ 57.10
Akuvox R20A / R25A in-wall rain hood in silver is a folded metal canopy that wraps the top and sides of an R20A or R25A door phone, keeping driving rain, dripping water and overhead sun off the camera, card reader and call button. Made for flush-mounted stations.✓Silver in-wall rain hood for Akuvox R20A, R25A and R20A-2✓192 × 123 × 29 mm...
Akuvox R20A / R25A black in-wall rain hood — right three-quarter view Akuvox R20A / R25A black in-wall rain hood — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R20A / R25A Black In-Wall Rain Hood — AK-R20INH-BLACK

Akuvox
AK-R20INH-BLACK
$ 57.10
Akuvox R20A / R25A in-wall rain hood in black is a folded metal canopy that wraps the top and sides of an R20A or R25A door phone, keeping driving rain, dripping water and overhead sun off the camera, card reader and call button. Made for flush-mounted stations.✓Black in-wall rain hood for Akuvox R20A, R25A and R20A-2✓192 × 123 × 29 mm...
Akuvox R20A / R25A silver on-wall rain hood — front Akuvox R20A / R25A silver on-wall rain hood — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R20A / R25A Silver On-Wall Rain Hood — AK-R20ONH

Akuvox
AK-R20ONH
$ 57.10
Akuvox R20A / R25A on-wall rain hood in silver is a folded metal canopy that wraps the top and sides of an R20A or R25A door phone, keeping driving rain, dripping water and overhead sun off the camera, card reader and call button. Made for surface-mounted stations.✓Silver on-wall rain hood for Akuvox R20A, R25A and R20A-2✓154 × 88 × 50 mm...
Akuvox E16 / A05 in-wall box and decoration panel — right three-quarter view Akuvox E16 / A05 in-wall box and decoration panel — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox E16 / A05 Black In-Wall Installation Kit for Flush Mounting — AK-E16-INWALL

Akuvox
AK-E16-INWALL
$ 57.10
Akuvox AK-E16-INWALL flush-mounts the E16C facial recognition door phone or the A05C access terminal. The kit has the in-wall box, the bracket that carries the device and the trim board that frames it, plus all the screws and anchors.✓Flush-mounts the Akuvox E16C (192 × 88 mm) and A05C✓Wall cut-out 225 × 111 × 43 mm; box 223 × 109 × 40...
Akuvox S535 black on-wall mounting box — right three-quarter view Akuvox S535 black on-wall mounting box — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S535 Black On-Wall Mounting Box for Surface Mounting — AK-S535ONWALLK

Akuvox
AK-S535ONWALLK
$ 57.10
Akuvox AK-S535ONWALLK is the standard on-wall box for the S535 5″ facial recognition door phone. The S535 ships without a box: this slim black plate screws to the wall, the S535 hangs on its two hooks and is locked in with a Torx screw. For an S535 with a fingerprint, induction loop or LTE module, use the module version of the box.✓Surface-mounts...
Akuvox R20A / R25A black on-wall rain hood — right three-quarter view Akuvox R20A / R25A black on-wall rain hood — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R20A / R25A Black On-Wall Rain Hood — AK-R20ONH-BLACK

Akuvox
AK-R20ONH-BLACK
$ 57.10
Akuvox R20A / R25A on-wall rain hood in black is a folded metal canopy that wraps the top and sides of an R20A or R25A door phone, keeping driving rain, dripping water and overhead sun off the camera, card reader and call button. Made for surface-mounted stations.✓Black on-wall rain hood for Akuvox R20A, R25A and R20A-2✓154 × 88 × 50 mm...
Akuvox E16 / A05 black on-wall rain hood — right three-quarter view Akuvox E16 / A05 black on-wall rain hood — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox E16 / A05 Black On-Wall Rain Hood — AK-E16-ONWALLH

Akuvox
AK-E16-ONWALLH
$ 57.10
Akuvox AK-E16-ONWALLH is the on-wall rain hood for the E16C facial recognition door phone and the A05C access terminal. The black hood shades the screen and cameras and keeps rain off the glass on surface-mounted installs.✓On-wall rain hood for the Akuvox E16C and A05C✓208 × 94 × 50 mm; fixes to an 86 × 86 mm wall box or straight to the...
Akuvox R20A / R25A black rotary angle bracket — right three-quarter view Akuvox R20A / R25A black rotary angle bracket — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R20A / R25A Black Rotary Angle Bracket — AK-R20ANGLE

Akuvox
AK-R20ANGLE
$ 57.10
Akuvox R20A / R25A rotary bracket sits between the wall and a surface-mounted R20A, R25A or R20A-2, letting you swing the door phone round to face the path or gate instead of the opposite wall. Set the angle, then lock it with two Torx screws.✓Turns a surface-mounted R20A, R25A or R20A-2 towards approaching visitors✓137 mm tall; the door...
Akuvox S535 in-wall mounting box for expansion module — right three-quarter view Akuvox S535 in-wall mounting box for expansion module — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S535 In-Wall Mounting Box and Bracket for S535 with Expansion Module —...

Akuvox
AK-S535INWALLKEX
$ 57.10
Akuvox AK-S535INWALLKEX recesses an S535 that has an expansion module fitted underneath. The flush box is 52 mm longer than the standard one and the bracket carries both the station and its fingerprint, induction loop or LTE module, with the bottom fixing screw going into the module. Cut-out 255.5 × 94 × 34 mm.✓Flush-mounts an Akuvox S535 with one...
Akuvox E18 in-wall installation kit — front Akuvox E18 in-wall installation kit — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox E18 Black In-Wall Installation Kit for Flush Mounting — AK-E18INWALLK

Akuvox
AK-E18INWALLK
$ 57.10
Akuvox AK-E18INWALLK flush-mounts the E18C 7″ facial recognition door phone. The kit includes the in-wall box, the bracket and the trim plate that sandwich the door phone, plus six wall anchors, screws and an Allen wrench.✓Flush-mounts the Akuvox E18C (275 × 120 × 34.6 mm)✓Wall cut-out 320 × 145 × 56 mm; box 317 × 140 × 50 mm✓Flush...
Akuvox MD02 forehead temperature module — front Akuvox MD02 forehead temperature module — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox MD02 Forehead Temperature Detector Module for E16C, E18C and A05C — AK-MD02

Akuvox
AK-MD02
$ 420.50
Akuvox MD02 is the digital forehead temperature detector for the E16C and E18C face recognition door phones and the A05C access terminal. It checks forehead temperature at 0.3 to 1 m as people are recognised.✓Contactless forehead measurement at 0.3 m to 1 m✓Range 34 °C to 45 °C, 0.1 °C accuracy, ±0.3 °C deviation✓For Akuvox E16C and...
Akuvox MD06 6-button expansion module — front Akuvox MD06 6-button expansion module — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox MD06 6-Button Nametag Expansion Module for R20K and R20B — AK-MD06

Akuvox
AK-MD06
$ 302.50
Akuvox MD06 adds 6 backlit call buttons with name tags to an Akuvox R20K or R20B door phone, so visitors press a name instead of dialling a number. Aluminium front, IP65, flush-mounted, and modules can be combined for larger buildings.✓6 backlit speed-dial buttons with name tags✓Designed for Akuvox R20K and R20B door phones; multiple modules...
Akuvox MD12 12-button expansion module — front Akuvox MD12 12-button expansion module — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox MD12 12-Button Nametag Expansion Module for R20K and R20B — AK-MD12

Akuvox
AK-MD12
$ 317.00
Akuvox MD12 adds 12 backlit call buttons with name tags to an Akuvox R20K or R20B door phone, so visitors press a name instead of dialling a number. Aluminium front, IP65, flush-mounted, and modules can be combined for larger buildings.✓12 backlit speed-dial buttons with name tags✓Designed for Akuvox R20K and R20B door phones; multiple...
Akuvox three-unit in-wall box — front Akuvox three-unit in-wall box — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox Three-Unit In-Wall Box for R20K / R20B with MD06 / MD12 Modules — AK-MD3M-INWALLK

Akuvox
AK-MD3M-INWALLK
$ 151.00
Akuvox AK-MD3M-INWALLK flush-mounts an R20K or R20B door phone and two MD06 / MD12 modules side by side in one recess. It comes with the in-wall box, the bracket that joins the units into a single panel, wall fixings and the Torx screws that lock the panel to the box.✓Three-unit flush box: door phone + 2 modules✓For Akuvox R20K / R20B door...
Akuvox two-unit in-wall box — front Akuvox two-unit in-wall box — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox Two-Unit In-Wall Box for R20K / R20B with MD06 / MD12 Modules — AK-MD2M-INWALLK

Akuvox
AK-MD2M-INWALLK
$ 94.50
Akuvox AK-MD2M-INWALLK flush-mounts an R20K or R20B door phone and one MD06 or MD12 module side by side in one recess. It comes with the in-wall box, the bracket that joins the units into a single panel, wall fixings and the Torx screws that lock the panel to the box.✓Two-unit flush box: door phone + 1 module✓For Akuvox R20K / R20B door...
Akuvox X912 black angle bracket — front Akuvox X912 black angle bracket — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox X912 Black 30° Angle Bracket for X912K and X912S Door Phones — AK-X912ANGLE

Akuvox
AK-X912ANGLE
$ 75.60
Akuvox AK-X912ANGLE is the angle (rotary) bracket for the X912 door phone. Fixed to the wall one way round or the other, it turns the station 30° to the left or right, so an X912K or X912S on a side wall or gate pier faces the visitor instead of the far wall. The X912’s own wall bracket screws onto it.✓Turns the X912 30° left or right — fit it...
Akuvox R29 in-wall installation kit — flush box Akuvox R29 in-wall installation kit — flush box 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R29 In-Wall Installation Kit with Flush Box — AK-R29INWALLK

Akuvox
AK-R29INWALLK
$ 57.10
Akuvox R29 in-wall kit flush-mounts an R29 series 7″ door phone. Akuvox ships the R29 without mounting hardware and packs the flush-mounting box, flush-mounting bracket, screws and anchors in this kit. Recess size 314 × 124 × 53 mm.✓Flush-mounting box and flush-mounting bracket for the R29 series✓Wall cut-out 314 × 124 × 53 mm (H × W ×...
Akuvox R29 on-wall surface box — right three-quarter view Akuvox R29 on-wall surface box — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R29 On-Wall Installation Kit with Surface Box — AK-R29ONWALLK

Akuvox
AK-R29ONWALLK
$ 57.10
Akuvox R29 on-wall kit surface-mounts an R29 series 7″ door phone. It contains the wall-mounting box, which fixes over an 86 mm wall box or straight to the wall, plus the screws and anchors. Akuvox ships the R29 without mounting hardware, so a surface install needs this kit.✓Wall-mounting box for R29 surface installs, 323.4 × 129.4 × 25...
Akuvox X912 in-wall box and decoration panel — front Akuvox X912 in-wall box and decoration panel — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox X912 Black In-Wall Installation Kit for X912K and X912S Door Phones —...

Akuvox
AK-X912INWALLK
$ 57.80
Akuvox AK-X912INWALLK is the flush-mount kit for the X912 door phone. It recesses an X912K or X912S into the wall so only the front panel and a slim plate sit proud, with the cabling hidden in the box. The flush-mounting box, bracket, plate and all fixings are included.✓Flush-mounting box (264 × 115.6 × 45 mm), bracket and 273 × 125.6 mm finishing...
Akuvox X912 black in-wall rain cover — right three-quarter view Akuvox X912 black in-wall rain cover — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox X912 Black In-Wall Rain Cover for X912K and X912S Door Phones — AK-X912INWALLH

Akuvox
AK-X912INWALLH
$ 57.10
Akuvox AK-X912INWALLH is the black rain cover for a flush-mounted X912 door phone. It fits between the flush-mounting bracket and the box of the X912 in-wall installation kit, framing the X912K or X912S with a hood across the top that keeps rain off the screen and camera.✓Black hood frame for flush-mounted Akuvox X912K and X912S door...
Akuvox R29 black on-wall rain hood — front Akuvox R29 black on-wall rain hood — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R29 Black On-Wall Rain Hood — AK-R29ONWALLH

Akuvox
AK-R29ONWALLH
$ 57.10
Akuvox R29 on-wall rain hood in black wraps the top and sides of an R29 series door phone, keeping rain and overhead sun off the 7″ touch screen, cameras and card reader. It fixes together with the R29 on-wall installation kit, so the station hangs and locks exactly as normal.✓Black on-wall rain hood for the Akuvox R29 series✓328 × 133 mm...
Akuvox X912 black on-wall rain cover — right three-quarter view Akuvox X912 black on-wall rain cover — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox X912 Black On-Wall Rain Cover for X912K and X912S Door Phones — AK-X912ONWALLH

Akuvox
AK-X912ONWALLH
$ 57.10
Akuvox AK-X912ONWALLH is the black rain cover for a surface-mounted X912 door phone. The X912’s own wall-mounting bracket sits inside the cover and the two are fixed to the wall together, so the hood wraps the top and sides of the X912K or X912S and keeps rain off the screen, camera and keypad.✓Black hood for surface-mounted Akuvox X912K and X912S...
Akuvox X912 black thick on-wall mounting bracket
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox X912 Black Thick On-Wall Mounting Bracket for X912K and X912S — AK-X912ONWALLBT

Akuvox
AK-X912ONWALLBT
$ 57.10
Akuvox AK-X912ONWALLBT is the thick version of the X912’s on-wall bracket. Where the bracket supplied with every X912 is a flat plate, this one is a 27 mm deep box with 21.3 mm conduit entries: it stands the door station off the wall and encloses the cabling behind it, with the same hanging hooks and bottom lock so an X912K or X912S hangs on exactly as...
Akuvox R29 black in-wall rain hood — front Akuvox R29 black in-wall rain hood — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R29 Black In-Wall Rain Hood — AK-R29INWALLH

Akuvox
AK-R29INWALLH
$ 59.70
Akuvox R29 in-wall rain hood in black wraps the top and sides of an R29 series door phone, keeping rain and overhead sun off the 7″ touch screen, cameras and card reader. It fixes together with the R29 in-wall installation kit, so the station hangs and locks exactly as normal.✓Black in-wall rain hood for the Akuvox R29 series✓330.2 mm tall...
Akuvox internal LTE module (mini PCIe)
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox LTE Module for R20K-L, R29C-L, E18C and X916S-L Door Phones — AK-LTEMOD

Akuvox
AK-LTEMOD
$ 401.50
Akuvox LTE module fits inside LTE-ready Akuvox door phones such as the R29C-L, E18C and X916S-L, adding a 4G cellular connection for sites without a reliable wired network.✓Internal 4G LTE module for LTE-ready Akuvox door phones✓For R20K-L, R29C-L, E18C and X916S-L door phones✓LTE-FDD bands include B1, B3, B5, B7 and B28 for...
Akuvox E20S in-wall 86 back box — left three-quarter view Akuvox E20S in-wall 86 back box — left three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox E20S White In-Wall 86 Back Box — AK-E20INWALLK

Akuvox
AK-E20INWALLK
$ 18.40
Akuvox AK-E20INWALLK is the standard 86 in-wall kit for the E20S stainless steel emergency intercom. The E20S is a flush-mount, indoor-only panel that fixes to an 86-type back box with two tamper-proof screws — this is the box to build into the wall where there isn’t one already.✓86-type single in-wall back box for the Akuvox E20S✓82.5 ×...
Akuvox E21 black in-wall mounting box — front Akuvox E21 black in-wall mounting box — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox E21 Black In-Wall Mounting Box for E21A and E21V — AK-E21INWALL

Akuvox
AK-E21INWALL
$ 57.10
Akuvox AK-E21INWALL is the in-wall box for the E21A and E21V vandal-resistant emergency intercoms. The E21 is a flush-mount panel; this box goes into a 190 × 100 × 60 mm cut-out and the 210 × 120 mm stainless faceplate fixes to it with four Torx screws.✓Flush-mounting box for the Akuvox E21A and E21V✓Box 187 × 98.2 × 58.1 mm; wall cut-out...
Akuvox E21 silver on-wall rain hood — front Akuvox E21 silver on-wall rain hood — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox E21 Silver On-Wall Rain Hood and Surface Mount for E21A and E21V — AK-E21ONH

Akuvox
AK-E21ONH
$ 57.80
Akuvox AK-E21ONH is the on-wall mounting rain cover for the E21A and E21V emergency intercoms. The E21 is designed to flush-mount; this silver housing lets you fix it to the wall surface instead, with a built-in hood over the top and sides.✓Surface housing with integrated rain hood for the Akuvox E21A and E21V✓Use where the wall can’t be cut...
Akuvox S539 black on-wall mounting box — front Akuvox S539 black on-wall mounting box — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox S539 Black On-Wall Installation Kit for Surface Mounting — AK-S539ONWALLK

Akuvox
AK-S539ONWALLK
$ 57.10
Akuvox AK-S539ONWALLK is the on-wall installation kit for the S539 10″ Android facial recognition door phone. The S539 ships without a mounting box: this slim black bracket fixes to the wall and the S539 mounts onto it. Template, screws and anchors are included.✓Surface-mounts the Akuvox S539 (363.5 × 179.8 × 30.8 mm)✓Black bracket, 367.5 ×...
Akuvox R27 / R28 flush-mounting box Akuvox R27 / R28 flush-mounting box 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox R27 / R28 In-Wall Installation Kit with Flush Box — AK-R27R28INWALLK

Akuvox
AK-R27R28INWALLK
$ 57.10
Akuvox R27 / R28 in-wall kit flush-mounts an R28A or R27 door phone. It contains the flush-mounting box that goes into the wall, the flush-mounting bracket the station hangs on, and the screws and anchors to fix them. The door phones ship without mounting hardware, so a flush install needs this kit.✓Flush-mounting box and flush-mounting bracket for...
Akuvox X915 black in-wall mounting box — right three-quarter view Akuvox X915 black in-wall mounting box — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox X915 Black In-Wall Installation Kit for X915S Door Phones — AK-X915INWALLK

Akuvox
AK-X915INWALLK
$ 57.10
Akuvox AK-X915INWALLK is the flush-mount kit for the X915S. The door station ships without a mounting box, so every X915S needs either this in-wall kit or one of the on-wall boxes. This one recesses the 8-inch panel into the wall, with the cabling hidden in the box.✓Flush-mounting box, 334 × 119 × 40.2 mm✓Wall cut-out 337 × 122 × 41 mm (H ×...
Akuvox X915 black on-wall mounting box — right three-quarter view Akuvox X915 black on-wall mounting box — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox X915 Black On-Wall Installation Kit for X915S Door Phones — AK-X915ONWALLK

Akuvox
AK-X915ONWALLK
$ 57.10
Akuvox AK-X915ONWALLK is the standard surface-mount kit for the X915S. The door station ships without a mounting box; this wall-mounting box fixes to the wall — or over an 86 × 86 mm junction box — and the X915S hangs on it, standing 41.6 mm off the wall once installed.✓Wall-mounting box, 349 × 129 × 28.2 mm✓2 × M4 × 30 screws to fix over an...
Akuvox X915 black thick on-wall mounting box — front Akuvox X915 black thick on-wall mounting box — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox X915 Black Thick On-Wall Mounting Box for X915S Door Phones — AK-X915ONWALLBT

Akuvox
AK-X915ONWALLBT
$ 57.10
Akuvox AK-X915ONWALLBT is the thick version of Akuvox’s X915 on-wall mounting box. At 52 mm deep against 28.2 mm for the standard box, it surface-mounts the X915S the same way but stands it further off the wall, with more room behind the station for cabling.✓Thick on-wall mounting box, 349 × 129 × 52 mm✓52 mm deep — the standard X915 box is...
Akuvox X915 black angle on-wall kit — front Akuvox X915 black angle on-wall kit — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox X915 Black Angle On-Wall Kit for X915S Door Phones — AK-X915ONWALLAK

Akuvox
AK-X915ONWALLAK
$ 57.10
Akuvox AK-X915ONWALLAK is the angle on-wall kit for the X915S. Instead of a flat surface box it uses a wedge — 87.3 mm deep at the bottom and 26.2 mm at the top — so the door station’s 8-inch screen and cameras tilt 10° upward towards the person in front of it.✓Wedge-shaped on-wall box, 349.4 × 129.4 mm✓87.3 mm deep at the bottom, 26.2 mm at...
Akuvox X915 black in-wall rain cover — right three-quarter view Akuvox X915 black in-wall rain cover — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox X915 Black In-wall Rain Cover for X915S Door Phones — AK-X915INWALLH

Akuvox
AK-X915INWALLH
$ 57.10
Akuvox AK-X915INWALLH is the black rain cover for a flush-mounted X915S. It frames the recessed door station with a hood across the top, so rain drips clear of the 8-inch touch screen and cameras at exposed entries. Use it with the X915 in-wall installation kit.✓Black hood frame for a flush-mounted Akuvox X915S✓378 × 142 mm, hood 35 mm deep...
Akuvox X915 black on-wall rain cover — front Akuvox X915 black on-wall rain cover — front 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox X915 Black On-wall Rain Cover for X915S Door Phones — AK-X915ONWALLH

Akuvox
AK-X915ONWALLH
$ 57.10
Akuvox AK-X915ONWALLH is the black rain cover for a surface-mounted X915S. It shelters the top and sides of the door station on its on-wall box, so rain runs off the hood rather than across the 8-inch touch screen and cameras. Use it with the X915 on-wall installation kit.✓Black hood for a surface-mounted Akuvox X915S✓353 × 133.9 mm, 62 mm...
Akuvox E18 black on-wall rain hood — right three-quarter view Akuvox E18 black on-wall rain hood — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox E18 Black On-Wall Rain Hood for E18C — AK-E18ONWALLH

Akuvox
AK-E18ONWALLH
$ 57.80
Akuvox AK-E18ONWALLH is the on-wall rain hood for the E18C 7″ facial recognition door phone. The black hood covers the top and sides of a surface-mounted E18C, keeping rain off the glass and shading the screen and cameras from overhead sun.✓On-wall rain hood for the Akuvox E18C (standard and LTE)✓285 × 121 × 70 mm; for surface-mounted...
Akuvox X937 desktop stand — right three-quarter view Akuvox X937 desktop stand — right three-quarter view 2
  • New
CompareComparing Quick view
In Stock - Ready to Ship
Akuvox Mounting & Accessories

Akuvox Silver Desktop Stand for X937 15.6-inch Indoor Monitor — AK-X937DESK

Akuvox
AK-X937DESK
$ 113.00
Akuvox X937 desktop stand in silver is the pedestal mount for the 15.6-inch Akuvox X937 surveillance-and-intercom monitor. It holds the screen at 60° on a 174 mm deep base, so the X937 can work as a reception, concierge or security-desk console.✓Official Akuvox desktop installation bracket for the X937✓Holds the monitor at 60° on a flat 174...
Akuvox Intercoms
INFRONTTECH Promotional Banner INFRONTTECH Promotional Banner INFRONTTECH Promotional Banner

Need help choosing?

Tell us about your property and we'll recommend the right cameras and recorder.

07 5609 4910

Sydney 02 8814 6008
[email protected]

Mon–Fri, 9am–5pm AEST

Product added to wishlist